-80x80.jpg)
Brand: USA Standard Gear
Part Number: ZK GM11.5
USA Standard Gear Master Overhaul Kits give you all the high-quality installation parts you need to start and finish every differential job. USA Standard Gear offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses high-quality...
$463.75
Brand: PML Inc.
Part Number: 11147
Volume: about 1/2 quart over stock using factory fill levelDimensions (for August 2016 update): About 3/8 inch deeper than stock. Click here for dimensions.This cover fits the American Axle 11 1/2 inch (292mm) ring gear 14 bolt differential.This design by PML is for 2014 to 2018 Dodge Ram 2500 truck...
$255.00
Brand: Dirty Hooker Diesel
Part Number: 600-414
This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is by far one of our most popular hoops. The 600-414 is designed to work specifically with the AAM 11...
$429.00
Brand: Fleece Performance
Part Number: FPE-TUFSHAFTS
TufShafts are a direct replacement upgrade shafts for any 2001-2010 GM 2500-3500 with a 9.25” AAM front axle. They are designed to eliminate the stock passenger side split axle shaft that is prone to breaking under high torque situations, as well as the short drive side axle shaft that is pron...
$945.00
Brand: Innovative Machining Solutions
Part Number: IMS0110GMBRHK
These billet 6061 aluminum hubs are a great lightweight option for your GM 10.5 axle. These hubs are designed with stock wheel flange offset and accept factory races, bearings and seals. They come standard with wheel studs installed. Races, bearings, and seals will need to be installed. If you would...
$725.00
Brand: Wehrli Custom Fabrication
Part Number: WCF100113-X
Fits:
2001-2019 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML/L5P
2003-2009 Dodge 6.7L Cummins (With AA14-11.5 Axle)
2010-2018 Ram 6.7L (With AA14-11.5 Axle)
This Wehrli Custom Fab WCF100113 11.5" AAM Rear Axle Differential Cover is the perfect component for your truck. This cover is bu...
$362.78
Brand: Innovative Machining Solutions
Part Number: IMSD34BDRWHK
These billet 6061 aluminum hubs are a great lightweight option for your Dodge AAM 10.5/11.5 axle. These hubs are designed with stock wheel flange offset and accept factory races, bearings and seals. They come standard with wheel studs installed. Races, bearings and seals will need to be installed. I...
$725.00
Brand: Innovative Machining Solutions
Part Number: IMSD34BRHK
These billet 6061 aluminum hubs are a great lightweight option for your SRW Dodge AAM 10.5/11.5 axle. These hubs are designed with stock wheel flange offset and accept factory races, bearings and seals. They come standard with wheel studs installed. Races, bearings and seals will n...
$725.00
Brand: Dirty Hooker Diesel
Part Number: 600-421
This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is the first Dodge specific axle hoop. The 600-421 is designed to work specifically with the AAM 11.5...
$529.00
Brand: Torque King Tools
Part Number: TS1082
TS1082 Ball Joint Press Set for 2003-2013.5 Ram 2500 and Ram 3500 with Original Equipment Ball Joints This 7 Piece Ball Joint Press Set is specifically tailored to press out and press in original equipment American Axle Manufacturing (AAM) Ball Joints in your 2003 to 2013.5 heavy-duty Dodge or ...
$654.98
Brand: Torque King Tools
Part Number: QK4685
QK4685 Front Inner Axle Seal Installer Kit for 2003-2013 Dodge Ram AAM 9-1/4" 14 Bolt Front Axles installs the Inner Axle Seals on 2003-2013 AAM 925 14 Bolt front beam axles used in all 2003-2013 Ram 2500, 2003-2012 Ram 3500 4x4 trucks. Also fits 2004-2010 Ram 1500 Mega Cab with the solid ...
$304.99
Brand: Innovative Machining Solutions
Part Number: IMS1116GMBRHK
These billet 6061 aluminum hubs are a great lightweight option for your GM axle. These hubs are designed with stock wheel flange offset and accept factory races, bearings and seals. They come standard with wheel studs installed. Races, bearings, and seals will need to be installed. If you would like...
$725.00
Brand: USA Standard Gear
Part Number: ZK AAM11.5-D
USA Standard Gear Master Overhaul Kits give you all the high-quality installation parts you need to start and finish every differential job. USA Standard Gear offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses high-quality...
$418.75
Brand: Dirty Hooker Diesel
Part Number: 600-407
This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is the newest addition to our product line and is designed to fill a large gap in fitment. The 600-40...
$609.00
Brand: Dirty Hooker Diesel
Part Number: 600-405
This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is the newest addition to our product line and is designed to fill a large gap in fitment. The 600-40...
$559.00
Brand: Torque King Tools
Part Number: TK4038
TK4038 Inner Axle Seal and Tool Kit for 2013-up Ram 3500 and 2014-up Ram 2500 with AAM 925 12 Bolt Electric Central Axle Disconnect Front Axle. Installer and Thrust Plate Made in Montana.Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific...
$251.24
Brand: Dirty Hooker Diesel
Part Number: 600-603
DESCRIPTION
DHD 600-603 AAM9.25 Billet Front Differential Slider
This custom built billet slider for the AAM 9.25" Front Differential from DHD is a must for any competitive pulling or racing setup. This slider goes right in place of the factory powdered metal slider without modi...
$460.00
-250x250w.png "Innovative Machining Solutions Dodge AAM 11.5 Spool")
Brand: Innovative Machining Solutions
Part Number: IMSD115S
These Dodge AAM 11.5 spools are turned from 4140 forged steel, splined, heat treated and then finished turned on all locating surfaces. These spools come with a variety of spline options. Custom spline options can be made upon request. Please choose from the options below.
IMS Part Numb...
$1,525.00
Brand: Pulling Products
Part Number: AAMGirdlePlate
CANNOT SHIP EXPEDITED- THESE SHIP VIA USPS
This is a AAM 11.5" rear end girdle plate for GM and Dodge trucks.
Strengthens rear end housing
Reduces housing spreading
Snubber bolts press against bearing caps
Made in USA.
Part Number: AAMGirdlePlate
...
$295.99
Brand: Nitro Gear & Axle
Part Number: GM9.25-342R-NG
Fits: AAM 9.25" (Reverse Rotation)
GM IFS & Dodge (AAM) 9.25" Reverse High Pinion 3.42 Nitro Ring & Pinion
Tech Note:
Direct fit for 2007 & Newer Dodge 2500 & 3500 with OEM carrier ONLY.
2003-2006 Dodge vehicles using this ring & pinion on an OEM carrier req...
$399.00
Brand: Innovative Machining Solutions
Part Number: IMS0008DBK
These billet knuckles are a direct bolt on item for your 2000-2008 Dodge front axle. Made from 6061 billet aluminum the set of knuckles cuts 23 lbs and will work with your factory ball joints, unit bearings, steering arms and brakes.
Steering arms on the knuckles can be modified to clea...
$2,200.00
Brand: Mopar
Part Number: 5086682AA
OEM differential cover gasket for the AAM 9.25 front axle found in 2003-2013 Dodge Ram 2500 & 3500 trucks.
Mopar: 5086682AA...
$94.92
Brand: Mag Hytec
Part Number: AA14-11.5
Mag Hytec AA 11.5" 14 Bolt Dodge Rear Differential Cover
Dodge Rear 2003 & Up 2500 & 3500 Automatic & Standard Diesel
High Output Diesels 2500 & 3500 trucks
8 Quart Capacity
Please verify 100% that you have the 11.5 rear axle before ordering.
Overall Height Is 3 5/8"
Finned air...
$334.40
Brand: PML Inc.
Part Number: 11118
This American Axle differential is found on 2003 and newer Dodge Ram 2500, 3500 and 1500 Mega Cab trucks. The PML cover is larger than the stock cover so please check your truck carefully to make sure you have space for a larger cover. Reference the dimensions in the above link and review the fitmen...
$255.00
Brand: PML Inc.
Part Number: 10361x
This American Axle rear end differential cover fits some 2003 and newer Dodge Ram 2500 and 3500 and it fits GM trucks Silverado and Sierra 2500HD & 3500 with the Duramax or 8.1 engine.
The Dodge Ram 2500 and Ram 2500 may have a 10.5-inch or an 11.5-inch ring gear. You might have an identifica...
$255.00
Brand: Eaton
Part Number: TT 914A643
Smooth operation
Performs open until needed
Fully automatic limited slip
True Trac limited slip for Chrysler 9.25" front with 33 spline axles. The True Trac limited slip uses a worm-gear design to bias torque from one tire to the other, providing extremely smooth operation. Since there are no...
$924.99
Brand: Mag Hytec
Part Number: AA14-9.25-A
Mag Hytec AAM 9.25" 14 Bolt Dodge Front Differential Cover
Dodge Ram Front:2003-2013 2500 Automatic & Standard Diesel2003-2012 Dodge Ram 3500 Automatic & Standard Diesel
Overall height 3 5/8"
Standard Diesel and High Output / Gas Engines
*Lube Locker Custom Made Reusable Gasket
Includes...
$334.40
Brand: Mopar
Part Number: 68149259AD
This is a OE Mopar replacement differential cover. Comes with cover gasket.
Mopar part number: 68149259AD
Cross reference numbers:
AAM #: 40115891
6814-9259-AC
6814 9259 AC
68149259AC
68149259AD
...
$630.20
Brand: Haisley Machine
Part Number: 1054014
ARP Heavy Duty Axle Bolts & Nuts
Kit Includes:
16 Studs
16 Nuts (12 Point, Black Oxide)
Nuts and Studs also sold individually.
Manufactured for Haisley Machine by ARP
Will Fit; Dana 60, 70, 80 & 11.5 DODGE AAM (WILL NOT FIT GM AAM 11.5)
Does NOT include hub asse...
$166.34
Brand: PML Inc.
Part Number: 10302
This American Axle rear end differential cover fits some 2003 and newer Dodge Ram 2500 and 3500. These models may have a 10.5-inch or an 11.5-inch ring gear. (See our AAM 11.5, 14 Bolt for Dodge differential cover if you have an 11.5-inch ring gear.) Check the identification sticker in your glove bo...
$255.00
Brand: Mopar
Part Number: 5086686AB
Front axle seal for the AAM 9.25 found in 2003+ Dodge Ram 2500 & 3500 trucks.
Requires two (2), these are sold individually.
Part Number: 5086686ABSuperseded Part Number: 5086686AA
Replaces AAM 40011965.
Picture for representation only....
$54.51
Brand: Eaton
Part Number: 915A568
AAM 11.5 Rear TrueTrac
Automatic Torque Biasing
Smooth Actuating
Clutchles Operation
For Use In Rear Applications Only
For Use With 30 Spline Axles
True Trac limited slip for AAM 11.5 with 30 spline axles.
The Detroit Truetrac was the first helical gear differential ever introduce...
$1,229.99
Brand: Mopar
Part Number: 5086905AA
Mopar differential cover gasket. Will NOT work on 2003 trucks with automatic transmissions.Works on 11.5 & 11.8 American Axles
Mopar part number: 5086905AA...
$78.36
Brand: Mopar
Part Number: 68454491AA
Mopar OEM rear differential cover gasket
Works on 11.8" & 12 American Axles, 2500 & 3500 trucks with the Aisin or 68RFE automatic transmission.
Mopar part number: 68454491AA
...
$30.52
Brand: BD Power
Part Number: 1061825
BD's Cast to Cool Differential Cover is engineered to keep oil on the gears, with an extra capacity sump located at bottom to help the gears to pick up oil. With internal and external cooling fins you know its staying cooool.
Comes with:
Stainless steel allen head cap bolts
Fill plug
Ma...
$328.95
Brand: General Motors
Part Number: 87822530
Replace a damaged yoke or use to upgrade to 1480 series U joints. Direct fit to 11.5" axle.
Comes with new pinion seal
1480 series J joints have a cap diameter of approx 1.400"
...
$611.86
Brand: Mopar
Part Number: 5086773AC
Fits 2003-2018 Dodge Ram 2500/3500 single rear wheel trucks equipped with the AAM 10.5 or 11.5 rear axle.
Sold individually, 2 required per vehicle.
Mopar part number: 5086773AC
...
$82.65
Brand: EMS Offroad
Part Number: HC-00D-SRW
After talking to many newer Truck Owners, the Dodge owners are looking for better mileage and less wear on the front axle joints. Then both the Ford and Dodge owners are looking for cheaper maintenance cost on the wheel/hub bearings. Plus if you are pulling a heavy trailer, you can now use your truc...
$1,964.80
Backordered
Brand: Mopar
Part Number: 5175278AC
Backordered with No ETA (Updated 6/5/2025)
5175278AC OE Dodge AAM 9.25" Front Trac-Rite EL Locking Differential 33 Spline
5175278AA, 40039437 **THIS UNIT DOES NOT COME WITH WIRING HARNESS JUST THE PIGTAIL ON THE MAGNET SHOWN IN THE PICTURE. -- AAM produces a wide variety of different...
$2,622.00
Brand: Mag Hytec
Part Number: GM14-10.5-A
Mag Hytec AAM 10.5" 14 Bolt Dodge Rear Differential Cover Dodge Rear 2003 & Up Dodge 2500 Automatic Gasoline Powered Trucks.6 Quart CapacityPlease verify 100% that you have the 10.5 rear axle before ordering.Bolt Pattern has two top and bottom bolts @ 11:00 & 1:00 O'clock & 7:00 & 5:00 O'clock f...
$313.50
Brand: Spicer
Part Number: 5-3206X
Spicer part number 5-3206X
These are designed specifically for the rear one piece driveshaft that utilize the 1485 series yokes in 03-up Dodge Ram 2500/3500 trucks with the AAM 11.5 rear axle. Please double check your truck to verify cap sizes before ordering.
Bearing Cap Diameter (1)&nb...
$64.95
Brand: Mopar
Part Number: 5086983AA
Fits 2003-2018 Dodge Ram 3500 dual rear wheel trucks equipped with the AAM 11.5 rear axle.
Sold individually, 2 required per vehicle.
Mopar part number: 5086983AA
...
$47.31
Brand: Aftermarket Parts
Part Number: 40038571
Specs:
9.55" centerline of u-joint to the end of the yoke
Barrel Diameter: 2.299"
Spline Diameter: 1.748"
1480/1485 series u-joint
Direct cross to Mopar 5102167AA.
Part Number: 40038571.
...
$115.56
Brand: Dirty Hooker Diesel
Part Number: 602-300MR
This is a replacement axle shaft with drive flange and billet aluminum end cap.
This is our heavy duty axle kit that we have built to our specifications with the best material and equipment around. This kit is built with the super tough 300M material and is rifle drilled. This kit is ideal for th...
$3,979.00
Brand: Dirty Hooker Diesel
Part Number: 600-701
DHD 600-701 GM AAM11.5 G80 Rear Differential Mini Spool
Our Mini Spool will work on all Chevy/GMC & Dodge rear AAM 11.5 axles equipped with G80 Differentials , and is a great affordable spool alternative. This kit is excellent for truck pulling and drag racing but not recommended to be used in ra...
$299.00
Brand: Dirty Hooker Diesel
Part Number: 037-150
DHD 037-150 Axle Tube Reamer
Our axle tube reamer is an affordable tool for any garage or shop that will enable one to ream out axle tube housings for larger axles. This is the same tool we use for our DHD 38-Spline axle shafts, and is priced way below the competitions tools.
...
$369.00
Brand: Merchant Automotive
Part Number: 26064030
Best practice to replace the pinion seal anytime it needs to be removed.
--OEM quality seal at a fraction of the price.
Part number: 26064030...
$42.80
Brand: EMS Offroad
Part Number: HC-00D-DRW
After talking to many newer Truck Owners, the Dodge owners are looking for better mileage and less wear on the front axle joints. Then both the Ford and Dodge owners are looking for cheaper maintenance cost on the wheel/hub bearings. Plus if you are pulling a heavy trailer, you can now use your truc...
$1,964.80