-80x80.jpg)
Brand: Bosch
Part Number: 0986435503
03-04 Dodge 24 Valve Common Rail Diesel Bosch Stock Injector
Quantity 1 (one)
Bosch Dodge Ram Cummins Common Rail injector.
1 Year Warranty.
This is a 2003-2004 Dodge 5.9L Cummins Diesel Bosch Fuel Injector, that has been remanufactured by the same company who built it new, Bosch. It ...
$338.60
Brand: Banks Power
Part Number: 489xx
Banks' 4" heavy-duty stainless Monster exhaust system cuts backpressure up to 98% and flows up to 176% better than stock. The streamlined intermediate pipe(s) and tailpipe are formed of stainless, heavy-wall tubing with constant-diameter bends to maximize airflow and lower exhaust gas temps.
The po...
$489.00
Brand: CNH
Part Number: 84142216
First generation (1989-1993 Dodge 5.9L VE Cummins) mechanical fuel lift pump.
This pump supplies 3-5PSI of fuel pressure to the VE injection pump.
Cummins states that this pump needs to be replaced if your pressure falls below 3PSI under load.
CNH: 84142216 (replaces J904374)
Part do...
$51.84
Brand: AirDog by PureFlow Technologies
Part Number: A7SPBD338
The new AirDog® II 4G Demand Flow Fuel Preporator®
89-93 Dodge 5.9L Cummins Diesel 100GPH Airdog 2 System with preset fuel pressure regulator.
This new model Fuel Preporator® improves on the original by offering demand flow, so that the unit only draws as much fuel from the tank ...
$788.00
Brand: FASS by Diesel Performance Products
Part Number: FASD02165G
FASS Fuel Systems Signature Series Adjustable Diesel Fuel System 165GPH Dodge Cummins 5.9L 12 Valve 1989-1993
FASS Fuel Systems Signature Series Adjustable Diesel Fuel Systems are designed to be the most versatile high performance fuel System on the market that allows for adjustable fuel pr...
$599.00
Brand: Interstate-McBee
Part Number: M-3900068
89-97 Dodge Ram 5.9L Cummins Interstate McBee Main Cap Ring Dowel
For 14mm main studs
McBee part number: M-3900068
...
$2.03
Brand: Industrial Injection
Part Number: 8973077111SE
2001-2004 Reman LB7 Duramax Stock Turbo Remanufactured by Industrial Injection
Part number: 8973077111SESuperseded Part Number: IISCHEVY667
$300 core applies, customer is responsible for core return freight.
1 year warranty....
$1,371.68
Brand: Cummins
Part Number: 3804899
Cummins front crank main seal. Includes seal driver installation ring.
Cummins 3804899...
$84.65
Brand: Banks Power
Part Number: 48996x
Banks Power introduces the new 5" Monster Exhaust designed specifically for the 2017-2019 GM 6.6L Duramax L5P 2500/3500 HD pickup trucks. The DPF-back exhaust system features constant-diameter 5" mandrel-bent aluminized steel tubing and a massive patented tip which virtually eliminates bac...
$549.00
Brand: Complete Performance
Part Number: FMSU-REAR-GAS
Ford Rear Gas Sending Unit (1973-1989)This high quality replacement fuel sending unit is manufactured to original factory specifications. This set includes a new lock ring and o-ring. This set does not include a filter strainer. When making your selection, just choose which year fits your truck.Comp...
$99.86
Brand: Diesel Power Source
Part Number: MAN0127
T3 Exhaust Manifold for 12 Valve Cummins 1989-98
DPS presents a game-changing T3 Manifold for your 12V Cummins Exhaust, covering the years 1989-1998 for your Second Gen Cummins 12V. This is a direct factory bolt-on. The factory manifold has a T3 flange.
**Legal for use in California with...
$429.00
Hot
Brand: Fleetguard
Part Number: LF3894
Fleetguard LF3894 Stratapore oil filter for the 89-02 Dodge 5.9L Cummins Diesel.
Most filters look the same on the outside. It's what's inside that counts. Cummins Filtration exclusively designed StrataPore™ synthetic media in our Media Center for optimum performance and longer life. Unlik...
$20.44
-250x250.png "89-02 Dodge 5.9L Cummins P1P Stock Replacement HX35 Turbo")
Brand: Position 1 Performance
Part Number: P1STKHX
100% new turbo
No core
Gasket kit included
1 year unlimited mile warranty (cover defects in parts and workmanship)
P/N: P1STKHX
...
$547.37
Brand: CNH
Part Number: A77890
Want a good quality front seal & repair sleeve, but don't want to pay Cummins prices?
Or, do you not trust the aftermarket seals available?
This CNH (Case New Holland) front crank seal with repair sleeve is your solution.
This kit literally has a Cummins seal in it, at less than half the pr...
$122.85
Brand: Bosch
Part Number: 0460426103
Due to lack of cores on hand your core must be sent in to be rebuilt
If your core is in need of more than a standard rebuild we will call with how much more additional is needed.
Two week average build time
Stock Rebuilt 12 Valve VE Injection Pump
Fits late 89-Early 1990 12 Valve Cummins
1 Ye...
$1,099.36
Brand: WIX Filters
Part Number: 33379
WIX offers high quality, high efficiency fuel/water separators filters for automotive, medium and heavy-duty trucks, as well as farm, construction, mining and other equipment applications.
Some features include:
Low initial restriction providing for proper fuel flow and long service life.
For fue...
$27.99
Brand: Diamond Eye
Part Number: K4211S
K4211S - 1989, 1990, 1991, 1992, 1993 - DODGE 5.9L CUMMINS DIESEL 2500/3500 (ALL CAB AND BED LENGTHS) - 4" 409 STAINLESS STEEL - PERFORMANCE DIESEL EXHAUST KIT - TURBO BACK SINGLE
Also available with an HX40 flange downpipe, select option above. This is for AFTERMARKET turbos only, it will N...
$547.05
Brand: FloPro
Part Number: 4111xx
Fits, Dodge 1989-1993 5.9L Cummins 2500/3500, 4x4 only. Extended/Reg Cab, Long box.
4" Mandrel bent tubing for maximum flow
With or without muffler (please choose above), no bungs.
Lower Exhaust Gas Temperatures
More Pulling Power
Utilizes OEM Hangers
Increased Horsepower and Torque...
$589.78
PDP Pick
Brand: The Hungry Diesel
Part Number: BHAFIK
1st gen intake kit. Kit utilizes the BHAF air filter, and smooth 4" exhaust tubing. Allow your 1st gen Cummins to breathe!
Only fits turbos that have a 4 inch inlet! Please measure before ordering. Most non-intercooled trucks do not have a 4 inch inlet.
Includes ...
$279.99
Brand: Cummins
Part Number: 3913695
Cummins OEM fuel heater seal for the 89-93 Dodge 5.9L Cummins Part Number: 3913695...
$11.54
Brand: Bosch
Part Number: 2916699167
Genuine Bosch replacement VE Rotary injection pump lock washer.Bosch: 2916699167Superseded Bosch: 2 916 699 137 2916699167...
$2.30
New
Brand: XDP Mfg
Part Number: XD718
Fits: 1989-1993 Dodge 5.9L Cummins
This XDP XD718 Premium Balancer Series- Stock Replacement Harmonic Balancer is the perfect component for your truck. This harmonic balancer's other name is a crankshaft vibration damper and does more than spinning the pulleys on the engine. It helps decrea...
$595.95
New
Brand: XDP Mfg
Part Number: XD705
Fits: 1989-1993 Dodge 5.9L Cummins
This XDP XD705 Premium Balancer Series- Stock Replacement Harmonic Balancer is the perfect component for your truck. This harmonic balancer's other name is a crankshaft vibration damper and does more than spinning the pulleys on the engine. It helps decrease the...
$417.95
Brand: Ducky Fuel Injection
Part Number: DFI5X13SAC1GEN
Ducky Fuel Injection 5X0.013" (120HP) SAC InjectorsClassic injectors are built on reman Bosch bodies.These injectors are roughly 120HP over stock depending on setup and tuning. Perfect for someone looking for a little more power and mileage but still uses their truck for towing and work on a daily b...
$475.00
Brand: The Hungry Diesel
Part Number: THD-CVEP
This pump can have a several month lead time. Contact us to confirm an estimated lead time before ordering.
The Hungry Diesel very own Competition VE pump! This pump has done up to 648hp, fuel only, and pushes up to 320cc. Average cc is between 295-320cc. These pumps push more fuel than any ot...
$2,150.00
Brand: Diamond Eye
Part Number: K4211S-RP
Diamond Eye 4" stainless turbo back exhaust kit without muffler for 89-93 5.9L Cummins 4wd trucks only.
Fits all cab and bed lengths
Includes all clamps, hangers and brackets
Diamond Eye: K4211S-RP
...
$479.06
Brand: Industrial Injection
Part Number: PDM-03513CC
Performance Piston Features:
-- "Small Bowl", similar to the stock piston bowl found in 91.5-98 trucks. These are NOT direct replacement pistons for 89-91 engines.
– Drop In Replacement
– Complete W/ Rings, Wrist Pins And Clips
– Available in Std, .020, .040 ...
$1,484.54
Brand: Manton
Part Number: D-30x-12v
The factory pushrods in your Cummins are designed for factory power and boost levels. As power increases, safeguard your engine with upgraded pushrods. And if you're rebuilding your engine, no time like the present for a big upgrade with a set of Manton Pushrods. These are a stock length pushrod so ...
$232.32
Brand: Manton
Part Number: D-50x-12v
The factory pushrods in your Cummins are designed for factory power and boost levels. As power increases, safeguard your engine with upgraded pushrods. And if you're rebuilding your engine, no time like the present for a big upgrade with a set of Manton Pushrods. These are a stock length pushrod so ...
$333.60
Brand: Cummins
Part Number: 3915772
OEM Cummins timing pin housing sealPart Number: 3915772...
$8.87
Brand: Power Driven Diesel
Part Number: 52001020001
Current lead time 6 weeks out (Updated 3/26/25)
Power Driven Diesel head bolts are a great economical option for mild to moderate builds. Power Driven Diesel Head Bolts are class 12.9 fasteners with a special coating to enhance the appearance and prevent corrosion. Additionally, a custom-designed...
$199.99
Brand: Power Driven Diesel
Part Number: 5600101000x
Upgrade your 1989-1998 Cummins 12V engine’s performance with our meticulously engineered Performance Pushrods for Cummins 12V Engines. Optional stage choices include, Stage 1, Stage 2, Stage 2.5, and Stage 3, specifically designed for Second Gen and First Gen Dodge Cummins trucks. Ou...
$225.00
Brand: Power Driven Diesel
Part Number: 510020210xx
Power Driven Diesel’s 12v Cummins Stage 1 CNC Towing Port Cylinder Head features a new aftermarket casting that is surfaced to OEM specifications in-house using state-of-the-art equipment to ensure reliable head gasket sealing. These heads receive Power Driven Diesel’s Towing P...
$1,580.00
Brand: XDP Mfg
Part Number: XD314
Fits: 1989-1998 Dodge 5.9L 12 Valve Cummins
Upgrade the valve train in your 1989-1998 Dodge 5.9L Cummins 12-Valve with the XDP Pushrods 3/8" Street Performance XD314. When your Cummins engine is modified, the factory components are often pushed to their limits from increased cylinder pr...
$224.95
Brand: Cummins
Part Number: 3913994
Cummins OEM replacement timing pin o-ringPart Number: 3913994...
$9.17
Brand: Cummins
Part Number: 3935449
Cummins describes this part as a "noise isolator" and it replaces the original O-ring that came on the factory-original bolt. This noise isolator mounts inside the valve cover and serves the same function as the original O-ring while also helping reduce valve train noise. *Sold individually. 6 ...
$6.15
Brand: Keating Machine
Part Number: (6) M8 copper washers & (6) -158 o-rings
6 o-rings and 6 copper washers to reseal Keating Machine 12 valve billet valve covers.
Keating: (6) M8 copper washers & (6) -158 o-rings
...
$20.00
Brand: LarryB's
Part Number: FS20
This is the part that gets destroyed if your starter sticks on. If your solenoid burned up you should replace the starter contacts or install a Larry'B's Solenoid-Saver Diode before you replace the solenoid. If the plunger stays up with the key on but won't pull up when you crank the ...
$111.99
Brand: Interstate-McBee
Part Number: M-3864458/M-4895742
Both the inner and outer oil cooler gaskets.
McBee part numbers: M-3864458, M-4895742
...
$26.27
Brand: Cummins
Part Number: 3864458/4895742
Both the inner and outer oil cooler gaskets.
Gaskets 1 and 2 in image.
Cummins: 3864458, 4895742...
$77.92
Brand: Cummins
Part Number: 4089819
Complete OEM upper cylinder head gasket set for the '03-07 5.9L Common Rail Engines.Includes both the thick and thin head gaskets.
Part number: 4089819...
$644.41
Brand: Cummins
Part Number: 4089173
This is the lower end gasket set for the '03-Up 5.9L Common Rail Cummins Engines.
Please note this kit does NOT include crankshaft seals.....we have these individually if needed with or without the wear-sleeves.
Cummins: 4089173
...
$398.44
Brand: Mahle
Part Number: HS54556
Exhaust Manifold Gasket Material: Beaded SteelCylinder Head Bolts Included: NoCylinder Head Gasket Material: Multi-Layered SteelIntake Manifold Gasket Material: Rubber Coated SteelContains 1.20mm Service Specific Over-Bore Head Gasket, Contains Miscellaneous Gaskets And SealsSet Contains Overbore Se...
$225.61
Brand: Mahle
Part Number: HS54557
This is a complete Aftermarket upper cylinder head gasket set with "thick" head gasket, for the '03-'07 5.9L Common Rail Engines.
Contents:
Air Crossover (2)
Cylinder Head Gasket (thick) (1)
Exhaust Manifold (6)
Fuel Injection O-Ring (6)
Fuel Line O-Ring (11)
Inject...
$279.37
Brand: Interstate-McBee
Part Number: M-4089173
Interstate-McBee 5.9L Cummins Lower Gasket Set.
Includes Crank Seals, lower gasket, oil pan gasket.
Interstate-McBee part number: M-4089173
...
$205.79
Brand: Interstate-McBee
Part Number: M-4089819
This is a complete Interstate Mcbee upper cylinder head gasket set for the '03-'07 5.9L Common Rail Engines.This kit includes both the standard thickness AND "thick" head gaskets- this gives you the freedom to use whichever you want in your particular situation.
PICTURE FOR REPRESENTATIO...
$317.99
-250x250.png "1989-2002 Dodge 5.9L Cummins Keating Billet Rear Freeze Plug")
Brand: Keating Machine
Part Number: 122910-1P
Fits 1989 to 2002 12 & 24 Valve 5.9L Cummins engine block. Billet rear freeze plug features 1/2″ npt threaded center hole with plug (can be removed to accommodate coolant bypass). Stainless bolts, o-ring and hardware to mount and seal plug is included. Helps prevent blow out at high ...
$52.50
Brand: Industrial Injection
Part Number: PDM-0820x
12 & 24V VALVE FREEZE PLUG BACK PLATE
This freeze plug plate is available in 2 varieties:Stock plug retainer- When installed properly, this plate will prevent the rear freeze plug (still installed in engine) from being blown out. This plug does not come with an o-ring and one is not needed.
Blow...
$69.01