-80x80.jpg)
Brand: Cummins
Part Number: 3926481
Picture 1 is actual part. Pictures 2 and 3 for reference only.3926481 ADAPTER,FILTER HEAD Screw on style 20mm stud....
$20.81
Brand: Cummins
Part Number: 3924725
One of number 1 in image. Generally used on the P7100 injection pump inlet port.
Cummins part number: 3924725...
$22.53
Brand: Exergy Performance
Part Number: E04-20x09
Exergy 14mm Stroker Cummins CP3 Pump Race Series (6.7C Based)**
Primary Fuel System Requirement for Proper Pump Performance – 200GPH @ 15 PSI Per Pump
Part Numbers:
03-07: E04-20009
07.5-12: E04-20309
13-18: E04-20409...
$3,200.00
Brand: Pure Diesel Power
Part Number: PDP39264
Picture 1 is actual part in both available sizes. 40mm (Standard) & 66mm (Extended for Fuel Heater Sandwich)
Pictures 3 and 4 for reference only.PDP P/N: PDP39264
OEM P/N: 3926481 ...
$8.99
Brand: Cummins
Part Number: 3918192
One(1) of number 2 in second image only. Quantity 2 are needed for both sides of line.
Cummins: 3918192Replaces Chrysler 5015576AC
...
$10.05
Brand: Tork Teknology
Part Number: CBS010
CUMMINS 14MM FUEL PRESSURE GAUGE SNUBBER
* SNUBBER ELIMINATES GAUGE NEEDLE BOUNCE
* USE ON ANY FUEL SYSTEM WITH A 14MM X 1.5 THREAD
* FASTER INSTALLATION THAN A NEEDLE VALVE
Now, it's easier than ever to install a fuel pressure gauge on your Cummins diesel! If you want ...
$26.69
Brand: Tork Teknology
Part Number: 6xBS14MM
14MM BANJO SEAL WASHERS
PN BS14MM
Banjo seals are known by many different names and we've tested them all! The most common names are banjo bolt washers, unit rings, coated washers, bonded seals, banjo washers, seal washers, O ring washers, 14MM washers and sealing washers to n...
$9.12
Brand: Automotive Racing Products
Part Number: 247-5402
89-97 Dodge 5.9L Cummins 14mm Main Studs
STUDS vs. BOLTS
ARP recommends the use of main studs over bolts whenever possible for several
key reasons. First is the ability to obtain more accurate torque readings because
studs don’t “twist” into the block. All clamping forces are on one axis...
$304.27
Brand: Haisley Machine
Part Number: 2x4007XHD-DOWEL
Cylinder Head Alignment Dowel Pin (2 included)Use with 14MM Head Stud Kits...
$41.71
Brand: Haisley Machine
Part Number: XL14MMStuds
These extra heavy duty XL 14mm XHD studs are made from H-11 and have a glass bead finish, 220 ksi min.
Formerly Made By A1 Technologies
KIT INCLUDES: 14 Extra Long STUDS, WASHERS & 12PT NUTS
ThesE STUDS ARE DESIGNED TO BE USED WITH THE CUSTOM MODIFIED GIRDLE WE SELL.
IMPORTANT NOTE:
...
$509.84
Brand: Aftermarket Parts
Part Number: 14mmx2.00 Bottom Tap
Cummins 14MM Head & Main Stud Bottoming Tap
14mm x 2.00
Picture for representation purposes only.
...
$33.55
Backordered
Brand: Haisley Machine
Part Number: HMR 1054008XHD
Backordered with No ETA (Updated on 6/10/2025)
These extra heavy duty 14mm XHD studs are made from L19 and have a glass bead finish, 220 ksi min.
Studs hold 80PSI+ Boost
STUD SETS INCLUDE:
* 26 STUDS, NUTS & WASHERS
* ARP MOLY LUBE
* INSTRUCTIONS
XHD head ...
$803.42
Brand: Vulcan Performance
Part Number: SW14
These 14mm sealing washers work great on all 14mm fittngs including aftermarket aluminum fittings. These have an an inner lip that self centers on the fitting for a positive seal. No need for "custom" fittings when you have the right seals. Buna/Nitrile seal.
Also Available in 10mm and 12mm, call f...
$13.03
Backordered
Brand: Haisley Machine
Part Number: HMR 1054007XHD
Backordered with No ETA **Updated on 07/09/2024**
These extra heavy duty 14mm XHD studs are made from H-11 and have a glass bead finish, 220 ksi min.
Recommended for all high performance engine applications. We also recommend these if the engine is out of the truck for fut...
$803.42
Brand: Industrial Injection
Part Number: PDM-06023
Dodge Cummins 03-15 Common Rail 14MM Gorilla Girdle W/ ARP XL Main Studs (Requires Stamp Oil Pan)This kit includes
1 Gorilla Girdle, 14 top spacers, (large hole)
12 bottom spacers (small hole)
1 rear main spacer bar,
2 rear main stud nuts (12 point),
and 12 main stud nuts (Nylock).
Before ...
$1,016.82
Brand: Haisley Machine
Part Number: 14MMMAIN STUDS-4BT
Main studs
14mm x 2.00
4340 material
Black oxide finish
Hex broach for easy installation
HD washers and 12 pt hardened nuts
Instructions
Standard length
Manufactured for Haisley machine by ARP
Important note:
Please verify which size your stock main bolts are before orderin...
$380.66
Brand: S&S Diesel Motorsport
Part Number: CP3-DMX-xx
S&S Diesel Motorsport Duramax CP3 Pump
2001-2005 (LB7 & LLY) trucks will need updated fuel pressure regulator parameters
NEW LBZ Based pump
CP3-DMX-SS Duramax SuperSport CP3 – New LBZ based – (higher output >3500rpm)
CP3-DMX-10 Duramax CP3 1325 (10mm) – New LBZ based – (22% ove...
$1,130.00
Brand: Kenny's Pulling Parts
Part Number: KPP59GKw/STUDS
Girdle kit by Kenny's Pulling parts.Kit includes girdle, spacer blocks and 14mm main studs. If you have a 97.5+ Cummins block, you will need to have your main studs drilled & tapped out to 14mm, as they have 12mm threads from the factory.Install requires spacer blocks be machined to fit block and ...
$1,462.50
Showing 1 to 18 of 18 (1 Pages)