-80x80.jpg)
Brand: USA Standard Gear
Part Number: ZK GM11.5
USA Standard Gear Master Overhaul Kits give you all the high-quality installation parts you need to start and finish every differential job. USA Standard Gear offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses high-quality...
$463.75
Brand: PML Inc.
Part Number: 11147
Volume: about 1/2 quart over stock using factory fill levelDimensions (for August 2016 update): About 3/8 inch deeper than stock. Click here for dimensions.This cover fits the American Axle 11 1/2 inch (292mm) ring gear 14 bolt differential.This design by PML is for 2014 to 2018 Dodge Ram 2500 truck...
$255.00
Brand: USA Standard Gear
Part Number: ZBKGM11.5-A
USA Standard Gear Bearing Installation Kits are perfect for shops and builders who have shims on the shelf and are looking to save cost over a Master Overhaul Kit. This kit uses premium Koyo/Timken bearings and races along with all high-quality small parts. USA Standard Gear does extensive research ...
$286.25
Brand: Dirty Hooker Diesel
Part Number: 600-414
This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is by far one of our most popular hoops. The 600-414 is designed to work specifically with the AAM 11...
$429.00
Brand: Innovative Machining Solutions
Part Number: IMS0110GMBRHK
These billet 6061 aluminum hubs are a great lightweight option for your GM 10.5 axle. These hubs are designed with stock wheel flange offset and accept factory races, bearings and seals. They come standard with wheel studs installed. Races, bearings, and seals will need to be installed. If you would...
$725.00
Brand: Wehrli Custom Fabrication
Part Number: WCF100113-X
Fits:
2001-2019 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML/L5P
2003-2009 Dodge 6.7L Cummins (With AA14-11.5 Axle)
2010-2018 Ram 6.7L (With AA14-11.5 Axle)
This Wehrli Custom Fab WCF100113 11.5" AAM Rear Axle Differential Cover is the perfect component for your truck. This cover is bu...
$362.78
Brand: Innovative Machining Solutions
Part Number: IMSD34BDRWHK
These billet 6061 aluminum hubs are a great lightweight option for your Dodge AAM 10.5/11.5 axle. These hubs are designed with stock wheel flange offset and accept factory races, bearings and seals. They come standard with wheel studs installed. Races, bearings and seals will need to be installed. I...
$725.00
Brand: Innovative Machining Solutions
Part Number: IMSD34BRHK
These billet 6061 aluminum hubs are a great lightweight option for your SRW Dodge AAM 10.5/11.5 axle. These hubs are designed with stock wheel flange offset and accept factory races, bearings and seals. They come standard with wheel studs installed. Races, bearings and seals will n...
$725.00
Brand: Dirty Hooker Diesel
Part Number: 600-421
This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is the first Dodge specific axle hoop. The 600-421 is designed to work specifically with the AAM 11.5...
$529.00
Brand: Innovative Machining Solutions
Part Number: IMS1116GMBRHK
These billet 6061 aluminum hubs are a great lightweight option for your GM axle. These hubs are designed with stock wheel flange offset and accept factory races, bearings and seals. They come standard with wheel studs installed. Races, bearings, and seals will need to be installed. If you would like...
$725.00
Brand: Dirty Hooker Diesel
Part Number: 600-407
This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is the newest addition to our product line and is designed to fill a large gap in fitment. The 600-40...
$609.00
Brand: Dirty Hooker Diesel
Part Number: 600-405
This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is the newest addition to our product line and is designed to fill a large gap in fitment. The 600-40...
$559.00
-250x250w.png "Innovative Machining Solutions Dodge AAM 11.5 Spool")
Brand: Innovative Machining Solutions
Part Number: IMSD115S
These Dodge AAM 11.5 spools are turned from 4140 forged steel, splined, heat treated and then finished turned on all locating surfaces. These spools come with a variety of spline options. Custom spline options can be made upon request. Please choose from the options below.
IMS Part Numb...
$1,525.00
Brand: Mag Hytec
Part Number: AA14-11.5
Mag Hytec AA 11.5" 14 Bolt Dodge Rear Differential Cover
Dodge Rear 2003 & Up 2500 & 3500 Automatic & Standard Diesel
High Output Diesels 2500 & 3500 trucks
8 Quart Capacity
Please verify 100% that you have the 11.5 rear axle before ordering.
Overall Height Is 3 5/8"
Finned air...
$334.40
Brand: PML Inc.
Part Number: 10361x
This American Axle rear end differential cover fits some 2003 and newer Dodge Ram 2500 and 3500 and it fits GM trucks Silverado and Sierra 2500HD & 3500 with the Duramax or 8.1 engine.
The Dodge Ram 2500 and Ram 2500 may have a 10.5-inch or an 11.5-inch ring gear. You might have an identifica...
$255.00
Brand: Mopar
Part Number: 68149259AD
This is a OE Mopar replacement differential cover. Comes with cover gasket.
Mopar part number: 68149259AD
Cross reference numbers:
AAM #: 40115891
6814-9259-AC
6814 9259 AC
68149259AC
68149259AD
...
$630.20
Brand: ATS Diesel Performance
Part Number: 4029156248
ATS Protector Rear Differential Cover Kit- 14-Bolt, 11.5" Ring Gear American Axle Fits: *Dodge 2003-2018 2500/3500 trucks equipped with the 14 bolt 11.5" American rear AxleWill ONLY fit 2013-2018 trucks that have rear leaf spring suspension. WILL NOT FIT trucks with rear coil springs. *GM 2001+...
$280.68
Brand: Eaton
Part Number: 915A568
AAM 11.5 Rear TrueTrac
Automatic Torque Biasing
Smooth Actuating
Clutchles Operation
For Use In Rear Applications Only
For Use With 30 Spline Axles
True Trac limited slip for AAM 11.5 with 30 spline axles.
The Detroit Truetrac was the first helical gear differential ever introduce...
$1,229.99
Brand: ATS Diesel Performance
Part Number: 4029156248
ATS Protector Rear Differential Cover Kit- 14-Bolt, 11.5" Ring Gear American Axle Fits: *GM 2001-2019 2500HD & 3500 w/ Full Floating Axle (All Duramax & 8.1L Equipped Trucks) *Dodge 2003-2018 2500/3500 trucks equipped with the 14 bolt 11.5" American rear AxleWill ONLY fit 2013-2018 trucks th...
$280.68
Brand: Mopar
Part Number: 5086905AA
Mopar differential cover gasket. Will NOT work on 2003 trucks with automatic transmissions.Works on 11.5 & 11.8 American Axles
Mopar part number: 5086905AA...
$78.36
Brand: BD Power
Part Number: 1061825
BD's Cast to Cool Differential Cover is engineered to keep oil on the gears, with an extra capacity sump located at bottom to help the gears to pick up oil. With internal and external cooling fins you know its staying cooool.
Comes with:
Stainless steel allen head cap bolts
Fill plug
Ma...
$328.95
Brand: General Motors
Part Number: 87822530
Replace a damaged yoke or use to upgrade to 1480 series U joints. Direct fit to 11.5" axle.
Comes with new pinion seal
1480 series J joints have a cap diameter of approx 1.400"
...
$611.86
Brand: Mag Hytec
Part Number: AA14-11.5
GM/Chevy Sierra/Silverado Mag Hytec Differential Cover
2001 & Newer: 2500 & 3500
Full Floating Axle
Duramax & 8.1 Liter Gas
Fits '03 to 2012 GM and Dodge One Ton Trucks Rear
Holds 2 Extra Quarts Of Oil(5 Total)
Overall Height Is 3 5/8"
Finned...
$334.40
Brand: Mopar
Part Number: 5086773AC
Fits 2003-2018 Dodge Ram 2500/3500 single rear wheel trucks equipped with the AAM 10.5 or 11.5 rear axle.
Sold individually, 2 required per vehicle.
Mopar part number: 5086773AC
...
$82.65
Brand: Mopar
Part Number: 5086983AA
Fits 2003-2018 Dodge Ram 3500 dual rear wheel trucks equipped with the AAM 11.5 rear axle.
Sold individually, 2 required per vehicle.
Mopar part number: 5086983AA
...
$47.31
Brand: Dirty Hooker Diesel
Part Number: 602-300MR
This is a replacement axle shaft with drive flange and billet aluminum end cap.
This is our heavy duty axle kit that we have built to our specifications with the best material and equipment around. This kit is built with the super tough 300M material and is rifle drilled. This kit is ideal for th...
$3,979.00
Brand: Dirty Hooker Diesel
Part Number: 600-701
DHD 600-701 GM AAM11.5 G80 Rear Differential Mini Spool
Our Mini Spool will work on all Chevy/GMC & Dodge rear AAM 11.5 axles equipped with G80 Differentials , and is a great affordable spool alternative. This kit is excellent for truck pulling and drag racing but not recommended to be used in ra...
$299.00
Brand: Dirty Hooker Diesel
Part Number: 037-150
DHD 037-150 Axle Tube Reamer
Our axle tube reamer is an affordable tool for any garage or shop that will enable one to ream out axle tube housings for larger axles. This is the same tool we use for our DHD 38-Spline axle shafts, and is priced way below the competitions tools.
...
$369.00
Brand: AFE
Part Number: 46-71060A
aFe Power's new rear differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed out of durable die-cast A380 aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for a hassle-free...
$282.00
Brand: Merchant Automotive
Part Number: 26064030
Best practice to replace the pinion seal anytime it needs to be removed.
--OEM quality seal at a fraction of the price.
Part number: 26064030...
$42.80
Brand: BD Power
Part Number: 1061825
BD's Cast to Cool Differential Cover is engineered to keep oil on the gears, with an extra capacity sump located at bottom to help the gears to pick up oil. With internal and external cooling fins you know its staying cooool.
Comes with:
Stainless steel allen head cap bolts
Fill plug
Ma...
$328.95
Brand: Banks Power
Part Number: 19249
The All-New Patented Banks Ram-Air Differential Cover WIPES OUT THE COMPETITION!
When it comes to product development, we only make products that increase performance and beat the competition. So when we tested the popular Diff Covers on the market, we were shocked to find out that they actually ...
$395.00
Brand: Dirty Hooker Diesel
Part Number: 030-680
DHD 030-680 Billet Yoke 1480 American Axle Mfg AAM 11.5 Rear End
DHD Billet Yoke for AAM 11.5 rear axle. These yokes are built from a single piece of billet 4140PH material and come in 1410, 1480, and 1550 sizes. These yokes have inner locking straps that capsulate the cross section of the u-jo...
$889.00
Brand: AFE
Part Number: 46-71060A
aFe Power's new rear differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed out of durable die-cast A380 aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for a hassle-free...
$282.00
Brand: Dirty Hooker Diesel
Part Number: 600-750
DHD's Billet Chromoly 38 Spline Spool is the marketplace leader for strength, features and innovation. For 9 years our spools have been the trusted choice of countless Pro Street, Pro Stock, 2.5, 2.6, 3.0 pullers and drag racers with AAM 11.5 axles. Each spool is crafted from solid 4340 material and...
$1,659.00
Brand: Dirty Hooker Diesel
Part Number: 030-650
DHD 030-650 Billet Yoke 1550 American Axle Mfg AAM 11.5 Rear End
DHD Billet Yoke for AAM 11.5 rear axle. These yokes are built from a single piece of billet 4140PH material and come in 1410, 1480, and 1550 sizes. These yokes have inner locking straps that capsulate the cross section of the u-jo...
$889.00
Brand: BD Power
Part Number: 1041245
BD's 6r140 Flex Plate is CNC machined out of 1.5x thicker than stock quench and tempered 100,000psi steel. In-house machining incorporates an integrated counterweight which is then balanced to tighter tolerances than OE specifications.
Black Oxide coated to resist corrosion. The...
$597.95
Brand: Nitro Gear & Axle
Part Number: MKAAM11.5
Discontinued (Updated 2/14/2025)
Fits:
2003-2009 Dodge Cummins 2500/3500 5.9L/6.7L
2010 Ram 2500/3500 5.9L/6.7L
2001-2009 GM 2500HD/3500HD 6.6L Duramax LB7/LLY/LBZ/LMM
This Nitro Gear MKAAM11.5 Master Install Kit For AAM 11.5" is the perfect component for your truck. Each o...
$0.00
Brand: Dirty Hooker Diesel
Part Number: 030-610
Product Discontinued (Updated 1-30-25)
DHD's Heavy Duty Billet rear yoke assemblies are a must for any competition drag race, off road or sled pulling application.
DHD 030-680 Billet Yoke 1410 Series AAM 11.5 GM 10.5 14 Bolt Rear Axle
DHD Billet Yoke for AAM 11.5 rear axle. These yo...
$0.00
Brand: Mopar
Part Number: CHY11.5-373
Original Factory gear for 11.5" Chrysler in a 3.73 ratio. OEM gears are recommended for quiet applications where noise may be an issue. Factory gears are the quietest application available on the market and often come at a higher cost. Factory gears come with a one year warranty against defects....
$0.00
Showing 1 to 40 of 40 (1 Pages)