Wastegate & Misc Accessories

Commonly used on 03-2011 Dodge 5.9L & 6.7L trucks that upgrade to the center dump 3 piece exhaust manifolds. This drain tube is longer than stock to reach the turbo in the higher-mounted position. This can also be used on 94-02 Dodge 5.9L Cummins trucks utilizing a stock center dump manifold, HOWEV..

Stock length (12 Inch with bend) turbo drain tube for the 03-07 Dodge 5.9L Commonrail Cummins diesel trucks.Cummins: 3970875  ..

Fully Adjustable Boost elbow allows you to turn your boost up or down to help save your head gasket if not studded yet or to help tune the top turbos wastegate in twins. One quick twist of the allen screw is all it takes. For Less Boost Pressure, Turn screw out. For More Boost Pressure, Turn screw..

Turbo to Manifold mounting studs with flange head nuts. Standard turbo to manifold = short studsIf you have a 1" spacer between the two = long studsSome manifolds have 4 "threaded" holes, others have 2 "threaded" & 2 "drilled" holes for mounting the turbocharger.  Please make sure you choose the cor..

OEM Cummins turbo oil feed line. To verify fitment on 89-93 Cummins trucks, please enter your ESN/Engine Serial number.  Cummins part #3912747 Number 5 in image only...

Two fittings either side of turbo oil feed line. Cummins part number 3919687. Includes TWO of Number 9 & TWO of number 8 in image only...

Oil inlet fitting. The same fitting screws into the turbo housing and the oil filter housing on 94-98 Dodge 5.9L 12 Valve Cummins trucks. This is designed to work with the stock 94-98 turbo oil feed line.  The male fitting thread of this fitting is 12mm x 1.5, female end is 3/8 tube.  Cummins: 391..

-4 High Pressure braided steel line Complete with inlet/ outlet fittings 18" length2G Single Turbo Line: (this line would replace stock line)ONE END - comes with -4 JIC to m12 to a male -4 JIC. OTHER END - -4 JIC to M12 O-ringed fitting. This line has 90 degree bend on one end & straight..

94-07 Dodge 5.9L Cummins Stock Exhaust Manifold Turbo Studs & Nuts (4 nuts, 4 studs) Part numbers:3971421 - Discontinued, New Part Number: 5140306AA 3818824..

94-12 Dodge 5.9L/6.7 Cummins Stock Exhaust Manifold Turbo Stud Nuts (4) Nuts ONLY! Does NOT include studs. If you are looking for both, CLICK HERE. Cummisn part number: 3818824  ..

The Cummins Turbo Drain Tube Adapter is made from high quality 6061 aluminum and anodized black for a superior appearance. It fits into the block like the factory drain tube, but allows you to use high quality -10 AN hose to route your turbo drain. Comes complete with o-rings. Fleece Performance pa..

Turbo Oil Inlet Fitting w/2 o-rings for First Gen Cummins.This is for First Generation Cummins trucks that want to install an HX35 turbo in place of the H1C turbo. Cummins: 3081950 ..

25” Stainless Steel Flexible Oil Drain Line with dual o-ring block fitting.For use with 5.9 liter and 6.7 liter Cummins diesel engines This drain line is longer than stock to reach the turbo in the higher-mounted position such as in twin and triple turbo applications. The flexible design allow..

Put the finishing touches on your truck with this high quality Cummins Turbo Drain Tube Kit. The tube is braided stainless steel for durability on the exterior, and corrugate teflon tubing for flow and maximum flexibility. The fittings are 6061 aluminum with black anodize and come complete with o-ri..

94-02 Dodge 5.9L Cummins Diesel Rigid Turbo Drain TubeThis is the piece that comes stock on 94-02 Dodge 5.9L Cummins diesel trucks.Cummins: 3946300 Picture for representation only...

This is a non-returnable part Flexible turbo oil drain for Hx35, Hx40 and S300 Turbos. DOES NOT INCLUDE ANY SILICONE HOSE- the picture is wrong! Overall length approximately 12", Made of Stainless Steel. When ordering gasket choose the S300/S400 gasket as the outer flats on the 35/40 gaskets don'..

This fitting screws into the turbo center section of HE341 & HE351 turbos and allows you to use the 12 valve stock oil feed line on 94-98 Dodge 5.9L 12 Valve Cummins trucks. The male fitting thread of this fitting is 12mm x 1.5, female end is 3/8 tube.  Cummins: 3919687..

Includes clamps and section of 12" silicone hose.   T-Rex part number: 6.7CUMMINSOILDRAIN..

94-02 Dodge 24V Cummins Stock Exhaust Manifold Turbo Studs (4) Part # 3818823x4 Image For Reference Only..

HE351VE to HE300VG VGT Adapter pigtail connector. This is to put a 2007.5-2012 Turbo (HE351VE) on to a 2013+ Truck.  Part Number: 351300..

Number 10 in image only. Cummins: 3286499, replaces 3912183..

Seals for turbo feed line fittings. Cummins part number 3037236. Number 8 in image only...

S300 and S400 WITHOUT wastegate Turbo Blanket by Turbo Performance Turbo sock that fits aftermarket S300 Turbos and 2 stainless steel attachment ties.*  Faster Spool Up*  Lower underhood temps*  Cooler Intake air temps*  Lower exhaust gas temps*  3 layer, 1/2" thick,1800 degree continuous material ..

The Fleece FPE-CRTFL-S3S4 Turbo Oil Feed Line for you 2003-2018 Dodge 5.9L/6.7L Cummins is a high quality replacement for your aftermarket turbocharger. Featuring an extra flexible, smooth bore teflon hose, this feed line kit includes high quality AN fittings and is a simple bolt-on replacement. Des..

Replacement OEM turbo mount stud. Takes 4 studs for complete set. Number 4 in Image...

Wastegate Resistor, needed for the installation of an aftermarket turbo on a 3rd generation Dodge Cummins..

HE300VG to HE351VE VGT Adapter harness pigtail.  This is to put a 2013+ Turbo (HE300VG) on to a 2007.5-2012 Truck.   Part number: 300351..

07.5-12 Dodge 6.7L Cummins Stock Exhaust Manifold Turbo Studs (4) Studs ONLY! Does NOT include nuts. Cummisn part number: 4931642  ..

Features:Constructed of hard coated black stamped steel Direct Bolt-On application fits factory mounting locations, requires no modification of turbocharger Preset to 40 PSI, capable range from 20-60 PSI Heavier spring & larger diaphragm Custom aFe Power logo for an aggressive style Ful..

23.25" overall length!Flexible stainless steel turbo oil drain. New longer length allows use with our 6.7L Single Turbo S400 2nd Generation Conversion kit AND our twin turbo kits! Source Automotive part number: SAFOD-2325-SS..

S300 Turbo Blanket by Turbo PerformanceTurbo sock that fits aftermarket S300 Turbos and 2 stainless steel attachment ties.*  Faster Spool Up*  Lower underhood temps*  Cooler Intake air temps*  Lower exhaust gas temps*  3 layer, 1/2" thick,1800 degree continuous material with the ability to withstand..

Includes:2x 3900630 Drain tube to turbo bolts - number 2 from image only. ..

Includes:3970875 Flexible Turbo Drain Tube w/o-ring - Number 7 & 8 in image 5264568 Turbo Drain Gasket - Number 6 in image 2x 3900630 Drain tube to turbo bolts - Number 1 in imageIncludes numbers 1, 6, 7, & 8 from image Only...

Ever wonder if you have a boost leak or you know you have one, but can't find it? We finally have the tool needed to locate all boost leaks, no matter how small in minutes. This is a great tool to use anytime you have opened the system for anything. Even the smallest of leaks (1-3lbs) can cause trem..

Wastegate Solenoid Plug Cap - 2004.5 - 2007 Dodge 5.9L Cummins Diesel (machined SS303) This cap allows you to block off the hole in your turbocharger when the factory solenoid is removed. This is commonly done by those modifying their factory turbo especially when installing a compound turbocharger..

The sole job of the spring wastegate actuator, is to act as a pressure relief valve that controls the turbocharger boost output. The main parts of an actuator are the spring and adjusting bolt, the spring holds the wastegate shut until the turbo is delivering a predetermined boost level and then ope..

The XDP Boost Bolt Adapter is designed to take the hassle out of installing a boost gauge on your Cummins. Rather than drilling and tapping factory components; you can install the Boost Bolt Adapter in place of a factory intake plate bolt.   Features:Reversible, no-drill installation 5/8" B..

OEM  part number: 9866AWe've all been there. You grab your favorite beverage, you start working on your rig and things are going great. You're pulling off parts and then BAM...special tool required!Many of the vehicles we work on in today's world are made so that the average guy can't do the work wi..

Clean and simple are a racer’s by-words; especially when it comes to oil lines and fittings. PPE’s T4 Oil Feed Line Adapter simplifies oil line installation and reduces the number of pieces and connections required to make the turbocharger oil feed line connection. Made from billet aluminum, the ada..

Replacement OEM turbo mount nuts. Takes 4 for a complete set. These are sold INDIVIDUALLY.  Number 5 in Image...

Everything in image included. Part numbers:5264569 - #6 3900630 (x2) - #2 3946300 or 3918585- #7 (Depending on which one your ESN requires) 3937613 (x2) - #1 3286499 - #4 3903744 - #3..

Turbo drain elbow. Inserts in block above oil pan. Part numbers:3903744 - #3 ONLY..

Cummins Part Number: 3709861..

BD’s adjustable Waste Gate Actuator Kits keep the bypass valve closed, raising boost levels for increased performance and helping to prevent waste gate “creep”.  These kits includes a high temperature resistant Nomex diaphragm with a heavier spring and locking jam nut for precise boost pressure sett..

Cummins S300-S400 Turbo Installation KitContents:Turbo Drain Tube KitDrain Tube (20" end-to-end) Cummins Turbo Drain Tube Adapter Turbo Drain Flange Adapter Turbo Drain Gasket 7/8-14 to -10AN Fitting (2) 3/8"-16 Flange Head Bolts (2) M10 x 1.5 Flange Head BoltsTurbo Oil Feed Line ..

Companion to the PPE Oil Feed Line Adaptor, the PPE 516002000 T4 Oil Drain Fitting is also made from billet aluminum and significantly simplifies oil drain line installation. It too, installs with a tight O-Ring seal but thanks to its barbed end it accepts a rubber 5/8 inch oil drain line.FEATURES:&..

Introducing the all new aFe Power BladeRunner Wastegate Actuator for the Dodge Diesel Trucks 03-07 L6-5.9L(td). Constructed out of black anodized CNC T6061 billet aluminum for maximum strength and style, using a fully adjustable actuator arm with locking jam nut for precise boost pressure settings. ..

Ever wonder if you have a boost leak or you know you have one, but can't find it? We finally have the tool needed to locate all boost leaks, no matter how small in minutes. This is a great tool to use anytime you have opened the system for anything. Even the smallest of leaks (1-3lbs) can cause trem..