-80x80.jpg)
94-07 Dodge 5.9L Cummins Crazy Carl's Twin Turbo Intake Pipe
$190.00
- Part Number: CC-TTIP
- Est. Ship Time: Usually Ships In 3-5 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $220.00
Starting From $206.80
Starting From $184.00
Starting From $184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
This is our twin tu..
$190.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.Cummins 12V/24V Twin Turbo Cold PipeThis is the Cold Pipe for ..
$344.00
-250x250w.jpg "5\" ID to 4\" ID Reducing Hump/Intake Hose")
Cummins Filtration/Fleetguard Hump hose reducer for use with air cleaners
5.5 inches long.
5" ID on one side, 4" ID on other side...
$28.20
Product Unavailable (Updated 2/29/2024)
S&B part number: R1305
Oil Color: Blue Oil
Flange ID (a3): 5"
Flange Height (a4): 1"
To..
$0.00
-250x250w.jpg "5\" ID to 5\" ID Hump/Intake Hose Connector")
Cummins Filtration/Fleetguard 5"ID one side, 5"ID on the other side
Hump hose connector for use with air cleaners
6" Long
Pict..
$27.10
DiscontinuedFlows 150GPH! Fits 1994-1998 Dodge 5.9L Cummis Diesel Equipped trucks.PureFlow AirDog® manufactures and supplies AirDog® Fuel Air Se..
$0.00
1989-98 Dodge 12-Valve, T3, 3-Piece Exhaust Manifold, Comes Assembled with Black High Temperature Coating and Pre-Tapped for Pyrometer Probe
** Calif..
$594.99
Crazy Carls original product! This is our 3.5" intercooler piping kit for 94-02 Dodge Cummins.
The po..
$264.00
Full 3.5" MEGA pre and post intercooler intake system for Cummins 5.9L turbo diesel engines in 1994-1996 Dodge Ram pickup trucks.The 3.5" Mega Intake ..
$629.99
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.Cummins 12V/24V Twin Turbo Cold PipeThis is the Cold Pipe for ..
$344.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
This is a 45° EDPM rubber intake boot. It is 5" a..
$30.00
This item normally ships out in 2-3 business days EVEN if you choose expedited shipping.
Both Black and Blue boots now available!
This i..
$220.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100% stain..
$206.80
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100 percent stainless stee..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, tubular steel or 304 stain..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Polished 304 Stainless Steel intake horn for all (94-07) D..
$234.00
Dual intake horn promotes max flow to the head at both ends.
For use only with our dual intake plate(Not Included)
Comes with dipstick mount and..
$339.00
Another Crazy Carl original product!
The Tunnel Ram is a patented intake for the Dodge Cummins diesel engine. It's unique design increases the airf..
$364.00
Another Crazy Carls original product!This barbed push-lock fitting allows the use of 1/2" fuel supply line to the P7100. It is a great way to get the ..
$25.00
Backordered
Backordered with No ETA (Updated on 4/25/2025)
Another Crazy Carls original product!
The Tunnel Ram CR is a new patented i..
$364.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
For those who want the custom look, a dual plate allows tw..
$185.00
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
This is Crazy Carl's 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.F..
$35.00
-250x250w.jpg "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
One of the most complete kits available at t..
$1,710.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
Brackets, mount and linkage needed to use 24-Valve A..
$184.00
Another Crazy Carl's original product!Say goodbye to those old rusty shabby stock bolts!!Beautiful 304 Stainless Steel hardware kit for..
$29.00
The intercooler tube is constructed out of huge, mandrel bent 3” 409 stainless steel and is powder-coated for maximum cooling efficiency. Two heavy-du..
$249.00
Replaces the weak factory plastic intercooler pipe on the 07+ Dodge 6.7L. Eliminates potential cracking from increased boost pressures that come with ..
$224.95
Fits: 2003-2007 Dodge 5.9L Cummins
The AFE Bladerunner 3" Intercooler Tube Upgrade for your 2003-2007 Dodge 5.9L Cummins increases flow ..
$447.00
Fits: 2007.5-2009 Dodge 6.7L CumminsNothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can ..
$421.95
Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with t..
$359.00
Fits: 2010-2012 Dodge 6.7L CumminsBanks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ra..
$389.00
Fits: 2010-2012 Dodge 6.7L Cummins Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you ..
$421.95
Increase flow area up to 65% over the stock boost tubes with Banks' huge 3-1/2" boost tubes. Stock consists of a 3" plastic cold side tube and a 2.75"..
$409.00
Shibby Engineering's boost tube is designed to replace the factory intercooler tube. It is constructed from 3.5" mandrel bent stainless steel. The boo..
$181.25
Fits: 2013-2018 Dodge 6.7L CumminsDETAILS:Outflows stock I/C tube3" mandrel-bent powder-coated wrinkle-black stainless tubeBolt-on Kit fits OEM interc..
$254.00
Increase hot side flow area up to 103% over the stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes. Stock hot side t..
Starting From $439.00
OEM
replacement for left side boost tube (Driver side, Cold side) with silicone
couplers. 67% greater flow area compared to stock. Better flowing in..
Starting From $239.00
Upgrade and replace the smaller, poorly flowing factory pipes with our higher flowing 3.5” piping. This kit includes our upgraded extra layer silicone..
$526.11
Banks massive 3.5" boost tubes are the largest on the market, flowing more air than stock! Smooth mandrel-bent tubes deliver more air to your engine w..
$475.00
Fits: 2019-2023 Ram 6.7L CumminsOrder this AFE 46-20619-B BladeRunner Cold Side Intercooler Pipe for your 2019-2023 Ram 6.7L Cummins today. Swit..
$310.00