07.5-12 Dodge 6.7L Cummins Stainless Diesel S400 2G Style Swap Pipe Kit

DISCONTINUED (7-27-23)

Stainless Diesel's 2nd Generation style exhaust manifold turbo piping kit

Part Number: 07512-S3/S42GSPK

Drastically lower your EGT's with outstanding efficiency and drive-ability when you upgrade to a 2nd gen style manifold on a 3rd and 4th generation style dodge Cummins diesel-powered trucks utilizing state of the art Borg Warner S400 Based turbochargers. 

just add turbo and manifold and go. We have literally hundreds of turbo options available. *Cast Wheels / Billet Wheels / Light Weight Quick Spool Turbine Wheels / the list goes on & on...

A stainless Diesel 2nd Gen style turbo piping kit for 3rd gen Dodge Diesel trucks are built with HIGH STRENGTH CND'd flanges & aluminized mild steel piping. Unlike some competitors who use rubber hose & plastic pipes - our twin kits are strong enough for high boost anytime for many years! This piping kit puts your single turbo in twin position.  We find that inverting the manifold (facing upward), helps your turbo spool faster & more efficiently.  This will also make it easier to upgrade to twin turbos later down the road.

Included in this kit:

• High Flow Stainless Diesel cold air kit w/ S&B Airfilter
• Pre Filter
• Turbo Blanket
• Manifold Gaskets
• -6 braided stainless steel High Temp Oil Supply Line
• Oil supply line fitting
• Oil drain line
• Press-In Aluminum block drain & silicon drain hose
• Oil drain gasket
• Turbo Gaskets
• Turbo Mounting Studs
• Turbo Mounting Bolts
• V-Band Clamp for Down Pipe
  
• High Torque T-Bolt Clamps
• 3.00" Bead-rolled Intercooler Pipe
• Silicone Boot for intercooler pipe to turbo side (2007.5 - 2010 5.9 trucks will use the factory boot at the intercooler)
  
• 4.00" Air Cleaner Pipe w/ air inlet temperature sensor provision
• 4.00" Silicone boot w/ T-bolt clamps
• 4.00" Down Pipe (aluminized steel)
• 1.00"  Divided Spacer
• Installation instruction packet w/ pictures
• REQUIRES 2nd GEN 40* ANGLE MANIFOLD!
  

SPECIAL NOTES:

• S400 OPTION INCLUDED 4.62 FLANGE AND CLAMP STANDARD! IF YOU NEED A DIFFERENT SIZE PLEASE TELL US IN THE COMMENTS
  
• When choosing an S400 V-Band cover outlet option we supply aluminum elbow, o-ring, and clamp.
• All of our piping kits have a 1 - 2 week build time as they are built upon ordering.