Intercooler & Turbo Pipes

The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and machined 90° cast elbow was built to attach to any s300 style turbocharger that has a v-band outlet. Our high flow elbow utilizes a large 3″ OD outlet for ..

The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and machined 90° cast elbow was built to attach to any s300 style turbocharger that has a v-band outlet. Our high flow elbow utilizes a large 3″ OD outlet for ..

The Industrial Injection K27 Exhaust Outlet Elbow is a stock replacement elbow for your 1992-2002 Cummins trucks with v-banded 5 bolt flange. After years of weathered abuse the factory cast elbows that connect between your turbo and downpipe become rotted out and break bolts, causing exhaust leaks r..

Includes3" 90 degree elbowClampO-ringP/N: P1S4ELB..

This outlet elbow will fit on HX35 & HX40 and some S300 turbos that have a v-band compressor outlet flange.One end clamps on with a v-band style clamp, but ONLY includes the elbow, the other end allows for connection to a 3 inch intercooler hose. This elbow WILL bolt up to an H1C, but it featur..

Backordered with No ETA   **Updated on 01/31/2023**This outlet elbow is the same elbow that comes stock on all 94-02 Dodge 5.9L Cummins Diesel Trucks. One end clamps on with a v-band style clamp, but ONLY includes the elbow, the other end allows for connection to a 3 inch intercooler hos..

Includes ELBOW only. Cummins Part#4035834 Mopar Part#5161570AA This elbow will fit on 2003-2004 trucks as long as you use a 04.5-07 down pipe. Many people use this as an upgrade on 03-04 trucks as the stock elbow has a 3.5 inch ID outlet and this one has a 4 inch ID outlet...

Air Transfer Tube, includes O-Ring & V-Band Clamp, Fits A5K, HX60, & S400 Compressor outlets. Also known as a compressor outlet discharge elbow. 3 inch outlet. Includes:90 Degree Air Transfer Tube, Cummins: 3957380Sealing O-Ring, Cummins: 3066211V-Band Clamp, Cummins 3067979..

THIS INTERCOOLER BOOST TUBE IS DESIGNED TO ALLOW YOU TO ADAPT FORWARD FACING (3G STYLE) S300 COMPRESSOR COVERS TO 2G INTERCOOLER.This intercooler pipe is designed to fit a 2G style manifold in stock location on a 2g truck ('94-'02) with a 3G turbo cover.  (s300 forward facing 3rd gen style turb..

3.5" intercooler piping kit3.5" intercooler piping kit for 94-02 Dodge Cummins.  The polished aluminum piping looks great and its corrosion resistance and the extra flow capacity will help you keep your Cummins shiney and happy for years to come. The kit comes with BOTH drivers and passe..

Twin Turbo Hot Pipe Twin Turbo Hot Pipe. This connects the top turbine outlet to the bottom turbine inlet. It is made of thick tubing and heavy flanges . Designed for  standard gated top turbo and T6 lower turbo. If you are not sure, please contact us first! Includes stainless T6 gasket a..

Features:• Replaces the factory turbine elbow• Constructed of Durable ductile iron• The turbine elbow mounts to either the OE or aFe BladeRunner turbo (P/N: 46-60050) without any modification Hassle-Free Installation;The replacement turbine elbow mounts directly to the stock or aFe's upgraded turbo..

FULL 6" Air Intake Pipe for 6.7L S400 2nd Gen ConversionMade from mandrel bent aluminized steel. Machined & threaded ports for MAF & IAT sensors.Available with or without 3/4" crankcase breather nipple.Powder coated finishOverkill? Not hardly! Our dynamometer testing has proven gains up to ..

A beautiful addition to your engine bay! Get rid of that rusty old stock steel pipe and slip this mirror polished one in for a show quality look. We didnt forget the performance either! Each pipe is made in the USA of either polished 304 Stainless Steel or polished aluminum with a bead on each end ..

Sinister Diesel Intercooler Charge Pipe Kit Fits 2003-2007 Dodge 5.9L Cummins Product Features:Aluminum construction for lifetime rust free performance and heat dissipation Mandrel bent powder coated aluminum tubing for minimal turbulence and maximum flow Heavy duty four ply silicone boots to ..

Our 3.5" MEGA passenger side intercooler tube for Cummins 6.7L turbo diesel engines is a perfect compliment to the 3.5" Pusher MEGA Intake System. It's fully tig-welded, and utilizes mandrel-bent steel tubing. We include heavy-duty 4-ply silicone couplers and stainless T-bolt clamps, which makes ins..

Stainless Diesel's Complete Twin/Compound Turbo Kits for Dodge Diesels. Our 2nd Gen Dodge kits fit 12v '94 - '98 & 24v Cummins '98-'02. Drastically lower your EGT's with outstanding efficiency and driveability. This is the only way to get the best of both worlds -- great spool-up,..

Passenger side 3" turbo to intercooler tube for Cummins 5.9L turbo diesel engines in 1991.5-1993 Dodge Ram pickup trucks.This tube is a perfect compliment to the well known 3" Pusher Intake System. Included are the necessary heavy duty 4-ply silicone couplers and stainless T-bolt clamps for an easy ..

Our 3.5" MEGA Passenger Side Intercooler Tube for your 2010-2012 Dodge 6.7L Cummins is a perfect compliment to our 3.5" Pusher MEGA Intake System. By replacing the anemic stock intercooler tube you'll lower EGTs while increasing fuel economy, throttle response and turbo spool.Intercooler Compatibili..

This is a non-returnable partThis is a 3" intercooler pipe with flared ends. Can only be used on the drivers side of engine. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..

This is a non-returnable part3" Mandrel Bent 90° intercooler pipe.  **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..

Passenger side 3.5" MEGA turbo to intercooler tube for Cummins 5.9L turbo diesel engines in 1994-2002 Dodge Ram pickup trucks.This tube is a perfect compliment to the well known 3.5" Pusher MEGA Intake System. Included are the necessary heavy duty 4-ply silicone couplers and stainless T-bolt clamps ..

Our 3.5" MEGA passenger side intercooler tube for Cummins 6.7L turbo diesel engines is a perfect compliment to the 3.5" Pusher MEGA Intake System. It's fully tig-welded, and utilizes mandrel-bent steel tubing. We include heavy-duty 4-ply silicone couplers and stainless T-bolt clamps, which makes ins..

A beautiful addition to your engine bay! Get rid of that rusty old stock steel pipe and slip this mirror polished one in for a show quality look. We didnt forget the performance either! Each pipe is made in USA of polished aluminumwith a bead on each end to hold the boost in. A great addition for tr..

Cummins 12V/24V Twin Turbo Cold PipeThis is the Cold Pipe for our twin turbo system.It is fully jigged/welded/smoothed and comes with SS clamp and Oring (as needed) for big turbo outlet.Includes heavy duty boot and SS clamps to attach to the small turbo inlet.Bead rolled to hold the boots on. Comes ..

The Pusher 3.5" MEGA driverside intercooler tube for the 2007.5-2009 Cummins 6.7L is built around 3.5" mandrel bent, .060" thick steel tubing. Installing this intercooler pipe increases air flow by 35% over the factory 2.4" ID plastic intake plumbing.Some competitive products require you to cut..

FeaturesUpgrade tubes for both hot and cold side of the intercooler 3" mandrel-bent powder-coated stainless tube for heat resistance and long-life Includes high-temp couplings and stainless steel t-bolt clamps Couplings constructed out of heavy-duty high-temp 5-PLY polyester for heat-resistan..

Stainless Diesel's 2nd Generation style exhaust manifold turbo piping kitPart Number: 07512-S3/S42GSPKDrastically lower your EGT's with outstanding efficiency and drive-ability when you upgrade to a 2nd gen style manifold on a 3rd and 4th generation style dodge Cummins diesel-powered ..

Features:Replacement tubes for both hot and cold side of the intercooler Constructed out of 3" mandrel-bent aluminum tubing Powder-coated a unique textured-red for heat resistance and long-life Includes high-temp couplings and stainless steel T-bolt clamps Couplings constructed out of heavy-..

Features:Replacement tubes for both hot and cold side of the intercooler Constructed out of 3" mandrel-bent aluminum tubing Powder-coated wrinkle-black for heat resistance and long-life Includes high-temp couplings and stainless steel T-bolt clamps Couplings constructed out of heavy-duty hig..

Crazy Carl's Twin Turbo Intake PipeIt is a full 5" mandrel bend, jigged/welded/smoothed.*2nd gen shown. 3rd gen has mounting holes for air sensor. This is a Special Order Part, Please Allow 1-2 Weeks for shipping...

• Replaces the factory turbine elbow• Constructed of durable ductile iron• The turbine elbow mounts to either the OE or aFe BladeRunner turbo without any modification. Hassle-Free Installation;The replacement turbine elbow mounts directly to the stock or aFe's upgraded turbo for a hassle-free insta..

The Pusher intercooler tube kit for the 2010-2012 Cummins 6.7L is built around 3.5" mandrel bent .060" thick tubing. These tubes increase air flow by 35% over the factory 2.4" ID plastic intake plumbing. This kit also includes heavy duty 4-ply silicone couplers and stainless T-bolt clamps to make in..

This is a non-returnable part3.5" Mandrel Bent 90° intercooler pipe.  **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..

This is a non-returnable part3" intercooler pipe with welded bungs in pipe for blowoff valves. Blowoff valves ARE Included! Picture shows part as NOT powder coated, but this part is shipped powder coated. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..

Sinister Diesel Intercooler Charge Pipe Kit Fits 2007.5-2009 Dodge 6.7L Cummins Product Features:Aluminum construction for lifetime rust free performance and heat dissipation Mandrel bent powder coated aluminum tubing for minimal turbulence and maximum flow Heavy duty four ply silicone boots t..

Features:Outflows stock I/C tube 3" mandrel-bent aluminum tube powder-coated for heat resistance and long-life Bolt-on Kit fits OEM and aFe's upgraded intercooler (P/N: 46-20062) High quality T-bolt clamps and heavy-duty couplings Included for a perfect fit and strength Hot-side tube replace..

Features:Outflows factory intercooler tube by 2% 2-3/4" Hot-Side mandrel-bent aluminum tube Powder-coated wrinkle-black for heat resistance Includes premium clamps and silicone couplings for long life, perfect fit and strength Works with OE intercooler Uses all factory mounting locations an..

Features:Outflows stock I/C tube by 20% Powder-coated wrinkle-black for heat resistance and long-life Constructed of 3-1/2" aluminum tubing Bolt-on Kit fits OEM and aFe's upgraded intercooler (P/N: 46-20062) Uses high quality T-bolt clamps and heavy-duty couplings Included for a perfect fit ..

Features:Outflows stock intercooler tubes by 17% 3" Hot-Side mandrel-bent  aluminum tubing 3-1/2" Cold-Side mandrel-bent aluminum tubing Powder-coated wrinkle-black for heat and corrosion resistance Includes premium stainless steel T-bolt clamps and silicone couplings for long life, perfect ..

Build Time of 9-11 Weeks!Install kit only does not include turbos. Requires custom tuning and utilizes the OEM 3rd generation exhaust manifold. Aftermarket manifolds must be sent in to confirm compatibility.Kit Includes:5" Intake Dry Air Filter Outerwears Pre-Filter Cover Stainless Steel Oil..

This is a non-returnable part4" Mandrel Bent 90° intercooler pipe.  **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..

Features:Outflows factory intercooler tubes 2-3/4" Hot-Side and 3-1/2" Cold-Side mandrel-bent aluminum tubes Powder-coated wrinkle-black for heat resistance Includes premium clamps and silicone couplings for long life, perfect fit and strength Works with OE intercooler Uses all factory moun..

Features:Outflows stock I/C tube by 20% Powder-coated textured-red for heat resistance and long-life Constructed of 3-1/2" aluminum tubing Bolt-on Kit fits OEM and aFe's upgraded intercooler (P/N: 46-20062) Uses high quality T-bolt clamps and heavy-duty couplings Included for a perfect fit a..

Features:Outflows stock I/C tube 3" mandrel-bent powder-coated wrinkle-black stainless tube Bolt-on Kit fits OEM intercooler High quality constant tension T-bolt clamps and heavy-duty 5-ply couplings Included for a perfect fit and strength Lower EGT's Hot-side tube upgradeFlow and Perfo..

The aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube outflows the factory intercooler tube by 25%.  Not only will you get increased performance but you will also see lower EGT's and increased MPG.  This tube includes two 1/8" NPT bungs for..

Features:Outflows stock I/C tube 3" mandrel-bent aluminum tube powder-coated for heat resistance and long-life Bolt-on Kit fits OEM and aFe's upgraded intercooler (P/N: 46-20062) High quality T-bolt clamps and heavy-duty couplings Included for a perfect fit and strength Hot-side tube replace..

This is a non-returnable part3" intercooler pipe with welded bungs in pipe for blowoff valves. Blowoff valves are not included. Picture shows part as NOT powder coated, but this part is shipped powder coated. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..