-80x80.jpg)
S300 V-Band Aluminum Compressor Outlet Flange
- Part Number: FS3OR-053
- Est. Ship Time: Usually Ships By Next Business Day
$67.99
More from this brand
Starting From $3,064.00
Starting From $2,799.00
Starting From $2,941.20
Starting From $2,499.00
Aluminum S300 compressor v-band outlet flange. Works with 3" pipe & 2.5" pipe.
This will also work on HX35 & H1C turbos that utilize a ..
$67.99
S400, GT42, 3x3V-band compressor cover O-ringed flangeWorks with 3.5" & 4" pipesFlange, o-ring, & v-band clamp included
Stainless Diesel part num..
$99.00
S400 Compressor Outlet O-ring Flange w/ O-ring included
Mild steel flange
For use with 4" & 3.5" pipe
Also fits GT42 V-band outlet cover
&..
$65.00
-10 %
Cummins: 3883284
Includes item #3 in second picture ONLY!..
$7.85 $8.70
Hot
-10 %
Fleetguard LF16035 Oil FilterMost filters look the same on the outside. It's what's inside that counts. Cummins Filtration exclusively designed Strata..
$17.10 $18.99
-10 %
Replacement UPGRADED Fuel and Water Separator for 89-93 1st Generation Dodge 5.9L Cummins diesel trucks!
Much larger, almost twice as tall! Does..
$14.75 $16.40
Multilayer Steel Exhaust Manifold Gasket
Will fit Cummins 5.9L 12 Valve engines.
Sold individually, 6 needed for entire engine.
Source Automotive ..
$6.00
3" V-Clamp style flange fits the 1989 -1998 H1C & HX35 turbo outlet. The OD of the opposite end slips into a 4" OD tube. (Same flange used on our 1989..
$75.00
25” Stainless Steel Flexible Oil Drain Line with dual o-ring block fitting.
For use with 5.9 liter and 6.7 liter Cummins diesel engines
This drain..
$57.50
-9 %
2003-2007 Dodge 5.9L Cummins Turbo Oil Drain Gasket part number: 5264568Old part number: 4980340..
$4.10 $4.53
Vulcan's steel HX40 flanges are machined to allow use of 3.5 in. or 4 in. OD tubing. Will mate up to your HX40 or aftermarket S300 variants with HX40..
$34.00
HX40 V-band Clamp fits HX40 flange.Fits 4" tube diameter
Stainless Diesel part number: VBHX40/413-400..
$42.60
-10 %
1989-2002 5.9L Cummins Diesel Turbo to Manifold T3 Gasket
Cummins Part number: 3901356
Picture may not represent actual gasket, it is for illustrati..
$7.35 $8.15
This is a non-returnable part Flexible turbo oil drain for Hx35, Hx40 and S300 Turbos.
Overall length approximately 12", Made of Stainless Steel. Whe..
$44.95
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
These clamps are smooth on the insid..
$2.99
-10 %
Dodge 5.9L Cummins H1C/HX35 Exhaust Outlet V-Band Clamp
This clamp generally connects the cast iron elbow to the turbo exhaust turbine housing. Pleas..
$41.50 $46.11
his is a regular 3" long straight coupler for use with high pressure turbo, supercharger, or intercooler piping.
Applications:
Joining your intake..
$7.49
Mass air flow sensor (MAF). Weld bung. Fits 2007.5-2012 CR Dodge 6.7 liter Cummins.
Stainless Diesel part number: MAFWB..
$39.50
Need a new turbo, but want more performance out of it?Stainless Diesel now offers their patented 5 Blade billet wheel design in a remanufactured ..
$3,064.00
1-2 Week Lead Time After the Order is Placed! Contact to Confirm!The Stainless Diesel 60/60 Tow BOSS 5 blade Mafia turbocharger is a drop-in upgrade f..
Starting From $2,799.00
The Stainless Diesel 'VGT BOSS' 5 blade Mafia turbocharger is a drop-in upgrade for your 2007.5-2012 6.7 Cummins, with an option for the 2013-2018 yea..
Starting From $2,941.20
Need a new turbo, but want more performance out of it?Stainless Diesel now offers their patented 5 Blade billet wheel design in a remanufactured ..
$2,499.00
This flange clamps to the back of the HE351 turbo and allows you to weld a 4 inch pipe on it. This flange is 4 3/8" OD
Mild Steel Flange...
$59.00
Turbo to Manifold mounting studs with flange head nuts. Standard turbo to manifold = short studsIf you have a 1" spacer between the two = long studsSo..
$26.50
-4 High Pressure braided steel line
Complete with inlet/ outlet fittings
18" length
2G Single Turbo Line: (this line would replace stock line)
..
$65.00
Billet Steel AIT sensor bung for those of you that are making your own turbo piping kits on a 5.9/6.7 Cummins.INCLUDES:stainless socket head screws5.0..
$39.50
Billet aluminum AIT sensor bung for those of you that are making your own turbo piping kits on a 5.9/6.7 Cummins.INCLUDES:stainless socket head screws..
$39.50
THIS INTERCOOLER BOOST TUBE IS DESIGNED TO ALLOW YOU TO ADAPT FORWARD FACING (3G STYLE) S300 COMPRESSOR COVERS TO 2G INTERCOOLER.This intercooler pipe..
$186.00
STAINLESS Mounting Bolt Kit for Aftermarket Cummins Exhaust Manifold.
Stainless Steel - Allen Head
(1) 1/4 NPT brass pipe plug
(1) 1/8 NPT brass ..
$29.99
S400 4 5/8" & 4 3/8 to 4" HX40 adapter
**ie. S400 T-4 exhaust housing with 4 5/8" or 4 3/8 turbo outlet to HX40 downpipe.
(adaptor is 1in...
$89.00
2nd Gen Dodge Style Downpipes (1994-2002)4.00"1 pieceMild steel or 409 Stainless SteelMandrel bent for high flowAs used in single turbo appl..
$149.00
Does not include hose to plug off hole in air intake stream.INCLUDES: CCV Hose & ClampSpecially designed for relocating the crank case ventilation to..
$32.50
Stainless Steel Cummins Exhaust manifold T-3 12 Valve
Sled Puller Stainless Diesel exhaust manifolds come with 2 ports drilled and tapped ..
$799.00
This kit has all the necessary hardware for your stock or performance HE300 turbo install to help prevent leaks and to replace older studs that are pr..
$114.95
-10 %
Cummins HX35 exhaust outlet elbow for 94-02 5.9L Cummins trucks. Cummins: 3927811..
$611.85 $679.85
-250x250.jpg "Industrial Injection High Flow 90° Cast Turbo Elbow")
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and machi..
$78.71
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and machi..
$96.85
The Industrial Injection K27 Exhaust Outlet Elbow is a stock replacement elbow for your 1992-2002 Cummins trucks with v-banded 5 bolt flange. After ye..
$254.84
-10 %
Includes3" 90 degree elbowClampO-ringP/N: P1S3ELB..
$86.40 $96.00
-10 %
Includes3" 90 degree elbowClampO-ringP/N: P1S4ELB..
$69.10 $76.80
-10 %
Cummins: 3883284
Includes item #3 in second picture ONLY!..
$7.85 $8.70
-11 %
McBee part number: M-3883284..
$1.85 $2.07
Fits Cummins 24 valve common rail HE351CW turbo exhaust outlet flange.Mild steel flange CNC made by Keating Machine.
Available in 3, 3.5, or 4 inch. ..
$39.00
This flange clamps to the back of the HE351 turbo and allows you to weld a 4 inch pipe on it. This flange is 4 3/8" OD
Mild Steel Flange...
$59.00
T4-T3 Adapter Flange
With T4 sized turbine housings, there is no performance advantage to changing the exhaust manifold to match... So, why go to the..
$132.95
Backordered
-10 %
Backordered til Late August **Updated on 04/27/2023**Includes ELBOW only.
Cummins Part#4035834
Mopar Part#5161570AA
This elbow will fi..
$139.70 $155.24
T4 Flange Turbo to Manifold Gasket
Divided T4 turbo flange gasket.
Part number: 407294-0001..
$10.68
-10 %
This will butt up to the exhaust outlet v-band flange on H1C & HX35 turbos (maybe some S200s as well), it is
Dimensions:
1.6" long x 2.90O..
$44.85 $49.84