-80x80.jpg)
Keating Machine HT3B Turbo Flange To 3” Round Turbo Exhaust Flange
$0.00
- Part Number: 010410-8
- Est. Ship Time: Product Unavailable
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $1,125.00
Starting From $1,594.95
Starting From $1,684.95
DiscontinuedBolts to HT3B (HT3B TURBO, NOT T3 FLANGE) exhaust flange and converts to 3" round outlet. Weldable mild steel, fits 3 inch round ID sche..
$0.00
This is a non-returnable part5" exhaust flange for HT3B or S400. Will require V-Band clamp #0408 to clamp on to Turbo
**PLEASE BE ADVISED THERE ARE ..
$0.00
Replacement Fuel and Water Separator for 94-96 Dodge 5.9L Cummins.
If you're looking for this filter WITHOUT the drain valve port, you may consider..
$25.49
T6 Turbo Flange Gasket, Divided.
Fits most HT3B turbos as well...
$12.00
This gasket is located in between the turbo exhaust housing and turbo elbow.
Number 33 in image ONLY!
Cummins: 3535001..
$18.90
HX35W Turbo repair kit.
Will not fit 2004.5 up.
Includes bearings and seals.
*Image May Not Be Actual Product*..
$209.79
Fits Cummins 24 valve common rail HE351CW turbo exhaust outlet flange.
Mild steel flange CNC made by Keating Machine.
Available in 3, 3.5, or 4 in..
$39.95
Block Oil Drain Fitting, billet aluminum
Machined fitting to be driven into block for turbo drain connection, with o-ring. 7/8"..
$11.00
S400 air outlet v-band flange tapered to 16ga tube. Comes with matching USA made matching clamp. These flanges measure 4.21″ total outside diameter. F..
Starting From $54.90
3.5 ” V-band clamp. Fits most Keating Machine 3.5″ V-band flanges, S400, HT60 & some HX60 turbos when using our matching flanges. 4.21 inch OD, .400 i..
$19.95
This is for both washers and the check valve.
Number 4 & 5 only.
Cummins part number: 3918188, 3924726..
$164.89
94-98 5.9L 12V Dodge Cummins Injector Puller
Injector Removal Tool
* PULLS 1994 TO 1998 CUMMINS INJECTORS FAST !
* QUICKLY REMOVES STUCK INJE..
$23.69
Single Layer Exhaust Manifold Gasket Set, Set of 6
Fits 1989 to 1998 5.9L 12V Cummins Diesels
Cummins: 3927154
Picture for representation only. ..
$63.86
-250x250w.jpg "T3 Split 1/2\" Steel Turbo Spacer")
DISCONTINUEDThis is a non-returnable partFully Machined -T3 divided spacer plate we use between turbo & exhaust manifold on
some of our kits. Th..
$0.00
94-12 Dodge 5.9L/6.7 Cummins Stock Exhaust Manifold Turbo Stud Nuts (4)
Nuts ONLY! Does NOT include studs. If you are looking for both, CLICK HERE.
..
$20.42
1989-2002 5.9L Cummins Diesel Turbo to Manifold T3 Gasket
Cummins Part number: 3901356
Picture may not represent actual gasket, it is for illust..
$8.78
Proven for over a decade on many top level competition pulling trucks and drag trucks who needed to mount p-pumps or Sigma pumps on 2003 and up 5.9L a..
$1,125.00
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,594.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
One piece billet valve cover fits 4BT Cummins 8 valve. Designed for aftermarket injection lines run either over top or around front and back of cover...
$479.95
One piece billet valve cover fits 4BT Cummins 8 valve. Notched to fit over stock injection lines. We also have non-notched valve covers for engines wi..
$479.95
Fits Cummins 4BT 4 Cylinder engine, includes o-ring to seal against block and stainless hardware. This cover doesn’t have a breather port so it is use..
$280.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines. 3.25″ total height wi..
$679.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines.3.25″ total height wil..
$709.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $495.00
6 o-rings and 6 copper washers to reseal Keating Machine 12 valve billet valve covers.
Keating: (6) M8 copper washers & (6) -158 o-rings
..
$20.00
Set of 12 titanium retainers with hardened steel locks. Fits 12 Valve Cummins engines with single valve springs that are stock OD for example 60 pound..
$330.00
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
Fits: 2003-2004.5 Dodge Cummins
This G&R Diesel
GRD00187-E Cummins Exhaust Repair Flange is the perfect component for your tru..
$79.00
Fits:
2004.5-2018 Dodge Cummins
This G&R Diesel GRD00187 Cummins Exhaust Repair Flange is the perfect component for your truck. ..
$79.00
This kit has all the necessary hardware for your stock or performance HE300 turbo install to help prevent leaks and to replace older studs that are pr..
$122.95
Cummins HX35 exhaust outlet elbow for 94-02 5.9L Cummins trucks.
Cummins: 3927811..
$791.63
This adapter allows you to convert your 3" outlet to a 4" or 4 3/8" to have a true 4" Exhaust outlet. Or replace your HX40 tu..
$89.99
-250x250.jpg "Industrial Injection High Flow 90° Cast Turbo Elbow")
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and m..
$81.14
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and m..
$99.85
The Industrial Injection K27 Exhaust Outlet Elbow is a stock replacement elbow for your 1992-2002 Cummins trucks with v-banded 5 bolt flange. After ye..
$262.72
Includes
3" 90 degree elbow
Clamp
O-ring
P/N: P1S3ELB..
$98.91
S300SXE Power Driven Diesel 3" forward discharge elbow and clamp.
PDD: 10000001055..
$100.00
Includes
3" 90 degree elbow
Clamp
O-ring
P/N: P1S4ELB..
$74.18
Includes ELBOW only.
Cummins Part#4035834
Mopar Part#5161570AA
This elbow will fit on 2003-2004 trucks as long as you use a 04.5-07 down pipe..
$970.44
McBee part number: M-3709861..
$4.15
Get the most versatile turbo mounting kit for your 1994-2007 Dodge 5.9L Cummins with the BD-Power 1045983 Turbocharger Mounting Kit. This kit includes..
$48.95