-80x80.jpg)
Keating Machine HE351CW Exhaust Flange Downpipe Reducer 062413-x
$39.95
- Part Number: 062413-x
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $1,125.00
Starting From $1,594.95
Starting From $1,684.95
Fits Cummins 24 valve common rail HE351CW turbo exhaust outlet flange.
Mild steel flange CNC made by Keating Machine.
Available in 3, 3.5, or 4 in..
$39.95
4 Inch, Aluminized
Bolts on to the stock turbocharger.
Diamond Eye: A220099
IMPORTANT NOTE: Due to varying laws and regulations, mo..
$163.18
Clamps cast iron exhaust elbow to turbo exhaust housing.Replaces Chrysler part number 05159965AA.
Cummins: 3535399
..
$65.78
03-07 Dodge 5.9L Cummins Turbine Housing to Cast Iron Elbow V-Band Clamp
Image may not be actual part.
Part numbers: 5159965AA Clamp5174049AA..
$116.24
-250x250.jpg "Heatshield Products Black Exhaust Wrap 2\" Wide by 25' Long")
Insulation Type: Insulator, keeps heat in
Uses: Exhaust Pipe Wrap, Header Wrap
Rated To: 1200F
Black exhaust wrap is designed to be ..
$33.59
This is a non-returnable part5" exhaust flange for HT3B or S400. Will require V-Band clamp #0408 to clamp on to Turbo
**PLEASE BE ADVISED THERE ARE ..
$0.00
1/2" thick to prevent warping
tapped holes
T6 Turbo Inlet FlangeMade from T304 Stainless Steel
Warranty: One Year Limited Warranty
Vibrant P..
$32.99
2003-2024 Dodge 5.9L & 6.7L Cummins Turbo Oil Drain Gasket part number: 5264568
Old part number: 4980340..
$4.79
This outlet elbow will fit on HX35 & HX40 and some S300 turbos that have a v-band compressor outlet flange.
One end clamps on with a v-band s..
$84.18
Cummins: 3883284
Includes item #3 in second picture ONLY!..
$9.19
FleetGuard AF25023 Replacement Air Filter for the 93 Dodge 2500/3500 equipped with the 5.9L Cummins Diesel.
The Fleetguard brand, defining quality fi..
$47.09
Includes item number 9 in the second picture only.
Cummins: 3914460..
$110.82
This is a freeze/expansion plug kit for the 4/6B Cummins engine block. This kit also includes the cylinder head/block alignment dowels as pictured.
I..
$19.35
Dodge 94-2002 Cummins HX40, Turbo 4" Downpipe
Fits the HTT HTB line of turbos, along with HX40 turbos.
4" flat flange downpipe.
Does ..
$166.76
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
These clamps are smooth on the ins..
$3.99
S400 air outlet v-band flange tapered to 16ga tube. Comes with matching USA made matching clamp. These flanges measure 4.21″ total outside diameter. F..
Starting From $54.90
Proven for over a decade on many top level competition pulling trucks and drag trucks who needed to mount p-pumps or Sigma pumps on 2003 and up 5.9L a..
$1,125.00
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,594.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
One piece billet valve cover fits 4BT Cummins 8 valve. Designed for aftermarket injection lines run either over top or around front and back of cover...
$479.95
One piece billet valve cover fits 4BT Cummins 8 valve. Notched to fit over stock injection lines. We also have non-notched valve covers for engines wi..
$479.95
Fits Cummins 4BT 4 Cylinder engine, includes o-ring to seal against block and stainless hardware. This cover doesn’t have a breather port so it is use..
$280.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines. 3.25″ total height wi..
$679.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines.3.25″ total height wil..
$709.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $495.00
6 o-rings and 6 copper washers to reseal Keating Machine 12 valve billet valve covers.
Keating: (6) M8 copper washers & (6) -158 o-rings
..
$20.00
Set of 12 titanium retainers with hardened steel locks. Fits 12 Valve Cummins engines with single valve springs that are stock OD for example 60 pound..
$330.00
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
Fits: 2003-2004.5 Dodge Cummins
This G&R Diesel
GRD00187-E Cummins Exhaust Repair Flange is the perfect component for your tru..
$69.00
Fits:
2004.5-2018 Dodge Cummins
This G&R Diesel GRD00187 Cummins Exhaust Repair Flange is the perfect component for your truck. ..
$69.00
This kit has all the necessary hardware for your stock or performance HE300 turbo install to help prevent leaks and to replace older studs that are pr..
$122.95
Cummins HX35 exhaust outlet elbow for 94-02 5.9L Cummins trucks.
Cummins: 3927811..
$752.03
New
This adapter allows you to convert your 3" outlet to a 4" or 4 3/8" to have a true 4" Exhaust outlet. Or replace your HX40 tu..
$79.99
-250x250.jpg "Industrial Injection High Flow 90° Cast Turbo Elbow")
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and m..
$81.14
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and m..
$99.85
The Industrial Injection K27 Exhaust Outlet Elbow is a stock replacement elbow for your 1992-2002 Cummins trucks with v-banded 5 bolt flange. After ye..
$262.72
Includes
3" 90 degree elbow
Clamp
O-ring
P/N: P1S3ELB..
$98.91
S300SXE Power Driven Diesel 3" forward discharge elbow and clamp.
PDD: 10000001055..
$100.00
Includes
3" 90 degree elbow
Clamp
O-ring
P/N: P1S4ELB..
$74.18
Includes ELBOW only.
Cummins Part#4035834
Mopar Part#5161570AA
This elbow will fit on 2003-2004 trucks as long as you use a 04.5-07 down pipe..
$922.33
McBee part number: M-3709861..
$4.15
Get the most versatile turbo mounting kit for your 1994-2007 Dodge 5.9L Cummins with the BD-Power 1045983 Turbocharger Mounting Kit. This kit includes..
$48.95