-80x80.jpg)
94-02 HX40 Vulcan Turbo Exhaust Flange
$34.00
- Part Number: HX40FL
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $17.00
Starting From $84.00
Starting From $62.50
Starting From $11.00
Vulcan's steel HX40 flanges are machined to allow use of 3.5 in. or 4 in. OD tubing.
Will mate up to your HX40 or aftermarket S300 variants wit..
$34.00
Stainless HX 40 v-band clamp for Holset HX40 and Schwitzer / Borg Warner S300 variants with 4" HX40 exhaust outlet.
Fits turbo to cast iron el..
$40.00
NOW YOU CAN COMPRESS BOTH VALVE SPRINGS ON YOUR CUMMINS 12 VALVE, AT THE SAME TIME!
The first ever valve spring compressor designed for the Cummins..
$45.25
Super Size Starter contacts have approximately 90% more contact area than stock. Designed to carry twice the voltage load for easier starting and last..
$42.99
This is a freeze/expansion plug kit for the 4/6B Cummins engine block. This kit also includes the cylinder head/block alignment dowels as pictured.
..
$21.28
By: Hellmann Performance
Sick of 1/4 tank or lower fuel supply issues with a suction tube? Park on a hill with low fuel and now your truck won't st..
$152.00
Turbo Oil Inlet Fitting w/2 o-rings for First Gen Cummins.This is for First Generation Cummins trucks that want to install an HX35 turbo in place of t..
$29.11
If you have a modified 89-93 Dodge 5.9L Cummins truck, you already know that it is a pain to adjust the stock fuel screw.
This custom made extra-long..
$21.99
Discontinued 8/30/24
Cummins Grid Heater Relay
Direct replacement, Mopar part.
Mopar: 68188401AA..
$0.00
This flange clamps to the back of the HE351 turbo and allows you to weld a 4 inch pipe on it. This flange is 4 3/8" OD
3rd Gen HE351 Flange
..
$59.00
This outlet elbow will fit on HX35 & HX40 and some S300 turbos that have a v-band compressor outlet flange.
One end clamps on with a v-band s..
$87.73
Cummins: 3069053
Clamp ONLY...
$51.77
With a burst rating of over 200psi., PPE’s Performance Silicone Hoses won’t leave you at the line while the competition leaves you in the dust. Each P..
$17.99
1989-2002 5.9L Cummins Diesel Turbo to Manifold T3 Gasket
Cummins Part number: 3901356
Picture may not represent actual gasket, it is for illust..
$8.78
This v-band clamp to be used with Hx40 flange, part # VC400hX40
..
$40.63
Includes item #4 in second picture.
Turbo Oil drain tube gasket only.
Cummins: 5264569..
$5.55
12v Return Tee with 2 Push Locks. Push Locks are 5/16"
Return Tee, Cummins 5/16 pushlock w/ tapped hole for injector galley return when elimin..
$17.00
VPMAX Big Line Dual Feed Kit for 94-98 12V Dodge Cummins trucks.
Allows fuel to enter from two points to keep that hungry P Pump fed!
Hose and f..
$84.00
Big Line Kit for 94-98 12V Dodge Cummins trucks.
This kit eliminates the restrictive banjo fittings from the fuel filter canister to the P7100 inje..
$62.50
Block Oil Drain Fitting, billet aluminum
Machined fitting to be driven into block for turbo drain connection, with o-ring. 7/8"..
$11.00
The Draw Straw™ 3 Is the threaded version of the original DS2 for use with plastic or metal tanks in Dodge, Ford and GM trucks. This unit is a s..
$49.00
Fits Donaldson B105006, Wix 2790, Fleetguard AH19037 BHAF filters only!
Outerwears Pre-Filters are designed to keep out larger particles of st..
Starting From $49.61
Machined aluminum with 1/4 NPT ports and Viton diaphragm.
Clamp and screw included.
Isolators are clear anodized...
$66.46
Universal Big Line kit 3/8" for 98.5 to 07 5.9LDodge Cummins trucks.With SAE rated fuel line.This kit eliminates the restrictive banjo fittings from t..
$40.99
Universal kit for 98.5 to 07 5.9LDodge Cummins trucks.With Fuel Pressure Access Tee.This kit eliminates the restrictive banjo fittings from the fuel f..
$62.50
Vulcan Performance's extended pump harnesses is made to plug right in to your factory ECM connection and lift pump. 74 in. long. The pump connection f..
$25.00
Universal Remote Fuel Filter Kit includes:
Powder coated bracket for frame mounting.
High Flow Filter Head with (1-14 threads) Same thread as the..
$99.99
Hot
This product is sold by the foot
Parker's new fuel line hose includes a new thermoplastic barrier that helps protect our atmosphere from harm..
$6.61
VPMAXIntercooler Boot SystemsUpgrade those weak OEM boots with our high quality silicone boots with stainless steel spring loaded T-Bolt clamps. Our s..
$242.00
This product is sold by the foot
Parker's new fuel line hose includes a new thermoplastic barrier that helps protect our atmosphere from harmful hyd..
$5.33
VPMAX Universal Dual Remote Filter System
For superior filtration to keep contaminants out of your high pressure fuel system our universal dual filte..
$236.50
Fits: 2003-2004.5 Dodge Cummins
This G&R Diesel
GRD00187-E Cummins Exhaust Repair Flange is the perfect component for your tru..
$79.00
Fits:
2004.5-2018 Dodge Cummins
This G&R Diesel GRD00187 Cummins Exhaust Repair Flange is the perfect component for your truck. ..
$79.00
This kit has all the necessary hardware for your stock or performance HE300 turbo install to help prevent leaks and to replace older studs that are pr..
$122.95
Cummins HX35 exhaust outlet elbow for 94-02 5.9L Cummins trucks.
Cummins: 3927811..
$791.63
This adapter allows you to convert your 3" outlet to a 4" or 4 3/8" to have a true 4" Exhaust outlet. Or replace your HX40 tu..
$89.99
-250x250.jpg "Industrial Injection High Flow 90° Cast Turbo Elbow")
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and m..
$81.14
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and m..
$99.85
The Industrial Injection K27 Exhaust Outlet Elbow is a stock replacement elbow for your 1992-2002 Cummins trucks with v-banded 5 bolt flange. After ye..
$262.72
Includes
3" 90 degree elbow
Clamp
O-ring
P/N: P1S3ELB..
$98.91
S300SXE Power Driven Diesel 3" forward discharge elbow and clamp.
PDD: 10000001055..
$100.00
Includes
3" 90 degree elbow
Clamp
O-ring
P/N: P1S4ELB..
$74.18
Includes ELBOW only.
Cummins Part#4035834
Mopar Part#5161570AA
This elbow will fit on 2003-2004 trucks as long as you use a 04.5-07 down pipe..
$970.44
McBee part number: M-3709861..
$4.57
Get the most versatile turbo mounting kit for your 1994-2007 Dodge 5.9L Cummins with the BD-Power 1045983 Turbocharger Mounting Kit. This kit includes..
$48.95