-80x80.jpg)
94-02 Dodge HT3B/S400 5" V-Band Clamp
$0.00
- Part Number: 408
- Est. Ship Time: Product Unavailable
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $15.00
Starting From $6.00
Starting From $23.57
Starting From $6.00
This is a non-returnable part12V S400 Turbo mount to engine. Style varies by year, please provide that info. This is required with our hotpipes. Parts..
$0.00
This is a non-returnable partThese two water lines for your 12V relocate your old lines to new location for twin turbo.
**PLEASE BE ADVISED THERE ARE..
$0.00
DISCONTINUEDThis is a non-returnable part24V S400 Turbo mount to engine. This is required with our hotpipes. Parts are powder coated. Mounting bolts a..
$0.00
This is a non-returnable partHx40 Flange, Sleeve will fit inside 4" exhaust tubing. This is made from steel. This will work with S300 turbos that are..
$43.00
03-07 Dodge 5.9L Cummins Turbine Housing to Cast Iron Elbow V-Band Clamp
Image may not be actual part.
Part numbers: 5159965AA Clamp5174049AA..
$116.24
-250x250w.jpg "5\" ID to 4\" ID Reducing Hump/Intake Hose")
Cummins Filtration/Fleetguard Hump hose reducer for use with air cleaners
5.5 inches long.
5" ID on one side, 4" ID on other side...
$28.20
DiscontinuedThis is a non-returnable partThis part is jigged and welded. You'll get a 5" V-Band Clamp and a 5" Seal Clamp for install. **PLEASE BE ADV..
$0.00
T6 Turbo Flange Gasket, Divided.
Fits most HT3B turbos as well...
$12.00
Air Transfer Tube, includes O-Ring & V-Band Clamp, Fits A5K, HX60, & S400 Compressor outlets.
Also known as a compressor outlet discharge elbow.
3 i..
$233.85
This is a non-returnable part5" exhaust flange for HT3B or S400. Will require V-Band clamp #0408 to clamp on to Turbo
**PLEASE BE ADVISED THERE ARE ..
$0.00
Commonly used on 03-2011 Dodge 5.9L & 6.7L trucks that upgrade to the center dump 3 piece exhaust manifolds. This drain tube is longer than stock ..
$109.96
98.5-2007 5.9L Cummins Diesel Manifold Gaskets, Set of 6
Cummins Part number: 3946275
Picture may not represent actual gasket, it is for illustrativ..
$60.90
Hot
Fleetguard LF3894 Stratapore oil filter for the 89-02 Dodge 5.9L Cummins Diesel.
Most filters look the same on the outside. It's what's inside tha..
$20.44
-250x250.jpg "Heatshield Products Black Exhaust Wrap 2\" Wide by 25' Long")
Insulation Type: Insulator, keeps heat in
Uses: Exhaust Pipe Wrap, Header Wrap
Rated To: 1200F
Black exhaust wrap is designed to be ..
$33.59
This v-band clamp to be used with Hx40 flange, part # VC400hX40
..
$40.63
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
Unlike some other t-bolt clamps av..
$3.99
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
These clamps are smooth on the insid..
$3.99
VPMAXIntercooler Boot SystemsUpgrade those weak OEM boots with our high quality silicone boots with stainless steel spring loaded T-Bolt clamps. Our s..
$242.00
This is a non-returnable partHx40 Flange, Sleeve will fit inside 4" exhaust tubing. This is made from steel. This will work with S300 turbos that are..
$43.00
Cummins Filtration/Fleetguard 5.5"ID one side, 5"ID on the other side
Hump hose reducer for use with air cleaners
6" Long
&nbs..
$30.70
T4 Multi Layer Stainless Steel gasket. Hi Performance Turbocharged Engines require a better than average sealing system. Source Automotive will not ac..
$15.00
Multilayer Steel Exhaust Manifold Gasket
Will fit Cummins 5.9L & 6.7L 24 Valve and 24V common rail engines.
Sold individually, 6 neede..
$6.00
This is a non-returnable part. Limited Stock Available. While Supplies Last.Laser Cut - Spacer plate between exhaust manifold and turbo. T..
$23.57
Multilayer Steel Exhaust Manifold Gasket
Will fit Cummins 5.9L 12 Valve engines.
Sold individually, 6 needed for entire engine.
Source ..
$6.00
This is a non-returnable part
Flexible turbo oil drain for Hx35, Hx40 and S300 Turbos.
Overall length approximately 12", Made of Stainless ..
$51.95
07.5-09 6.7L Intercooler Boot Kit (for 3.5" Intake Tube) comes with 2.75" x 9" tube, 3" Hump Hose, 3.5" Hump Hose, and a 3" to 3.5" reducer with clamp..
$0.00
It's ready. It fits. It works. It rocks! One of the best features of the 6.7L engine is the factory exhaust brake. Seems to me most folks don't want ..
$0.00
The 07.5-09 6.7L Intercooler Boot Kit comes with a 2.75" x 9" tube, 2 3" hump hoses, and 1 3.5" hump hose, as well as the clamps to match. **Image is ..
$0.00
Discontinued
45 Deg Rubber Reducer Elbow, Use with our Stainless Steel T-bolt Clamps.
This is a non-returnable part..
$0.00
3" V-Clamp style flange fits the 1989 -1998 H1C & HX35 turbo outlet. The OD of the opposite end slips into a 4" OD tube. (Same flange us..
$0.00
DiscontinuedThis is a non-returnable partThis part is jigged and welded. You'll get a 5" V-Band Clamp and a 5" Seal Clamp for install. **PLEASE BE ADV..
$0.00
Through extensive research & development and a multitude of program changes, Source Automotive has designed their 2nd gen twin turbo kit to allow the..
$0.00
This is a non-returnable part12V S400 Turbo mount to engine. Style varies by year, please provide that info. This is required with our hotpipes. Parts..
$0.00
This is a non-returnable partThese two water lines for your 12V relocate your old lines to new location for twin turbo.
**PLEASE BE ADVISED THERE ARE..
$0.00
DISCONTINUEDThis is a non-returnable part24V S400 Turbo mount to engine. This is required with our hotpipes. Parts are powder coated. Mounting bolts a..
$0.00
Includes Clamp Only. Fits 2010-2018 Cummins 6.7L diesels.
This clamp attaches the cast iron elbow to the downpipe. The flange diameter it clamps to..
$112.09
Fits: 2003-2004 5.9L Cummins 350HP (without Catalytic converter- for S400 turbo charger Downpipe used with install of S400 turbos with full Marmo..
$238.95
Fits: 2003-2004 Dodge 5.9L Cummins
This AP Emissions Turbo Downpipe V-Band Clamp ensures that your turbo downpipe is securely mounted in your vehic..
$53.95
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for re..
$46.19
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for re..
$43.48
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for re..
$48.25
Fits: 1989-1997 Dodge 5.9L CumminsThis AP Emissions Turbo Downpipe V-Band Clamp ensures that your turbo downpipe is securely mounted in your Truck. Ma..
$49.39
Cummins HX35 exhaust outlet elbow for 94-02 5.9L Cummins trucks.
Cummins: 3927811..
$791.63
Fits: 1994-1995 Dodge 5.9L CumminsPurePower turbochargers offer a quality unmatched by our competitors.Unique 100% functional end-of-linetesting with ..
$773.43
Fits: 1998-2002 Dodge Ram 5.9L Cummins45.25" length. 4 Inch DiameterThe MagnaFlow Dodge Turbo Downpipe 15450 is a 4in. diameter mandrel bent stainless..
$193.00
1998.5-2002 Dodge 5.9L 24 Valve Cummins Aluminized HX40 Downpipe with HX40 Turbo Flange V-Band Clamp
DOES NOT FIT STOCK TURBO- Fits HX40 Flange Tur..
$149.99
Fits: 1998.5-2002 Dodge 5.9L Cummins without catalytic converter and for use with aftermarket turbocharger The BD-Power 1045223 HX40 Downpipe for..
$273.95
S300SXE Power Driven Diesel 3" forward discharge elbow and clamp.
PDD: 10000001055..
$100.00
Air Transfer Tube O-Ring ONLY!
Cummins part number: 3066211Includes number 1 from image ONLY!..
$12.44
Air Transfer Tube O-Ring ONLY!
McBee part number: M-3066211..
$2.02