Downpipes & Clamps

Cummins: 3069053 Clamp ONLY...

Includes Clamp Only. Fits 04.5 and up Cummins 5.9L and 6.7L diesels. This clamp attaches the cast iron elbow to the downpipe. The flange diameter it clamps to is 5 3/8 inches. Optional gasket available above. Trucks do not have this gasket from the factory, but Mopar has released this part to allo..

Cummins: 3883284 Includes item #3 in second picture ONLY!..

4 Inch, aluminized. Bolts on to the stock turbocharger. Diamond Eye: 220100IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in Cali..

4 Inch, Aluminized Bolts on to the stock turbocharger. Diamond Eye: A220099IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in Cali..

This outlet elbow is the same elbow that comes stock on all 94-02 Dodge 5.9L Cummins Diesel Trucks. One end clamps on with a v-band style clamp, but ONLY includes the elbow, the other end allows for connection to a 3 inch intercooler hose. May also fit some S300 variants that feature a V-Band conn..

Clamps cast iron exhaust elbow to turbo exhaust housing.Replaces Chrysler part number 05159965AA. Cummins: 3535399  ..

Dodge 5.9L Cummins H1C/HX35 Exhaust Outlet V-Band Clamp This clamp generally connects the cast iron elbow to the turbo exhaust turbine housing. Please check that your turbo has this clamp before ordering, as some turbo outlets are different over the years.On 89-93 Dodge Cummins trucks this clamp at..

221043 - FOR 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 & 2002 - DODGE 5.9L CUMMINS DIESEL 2500/3500 - 4" ALUMINIZED - PERFORMANCE DIESEL EXHAUST - 221040 HX40 TURBO DIRECT PIPE & VC400HX40 V-BAND CLAMP. 4" flat flange downpipe with HX40 v-band clamp. This pipe is aluminized. This item CANNOT..

HE351 V-band Clamp. Fits HE351 flangeConnects the cast iron elbow to the back of the turbo.Fits 4" tube diameter.(This does not fit between the cast elbow and the downpipe) Stainless Diesel part number: HE351VBC-450..

Center Section to Turbine Housing V-Band Clamp for the HE341/HE351 turbo on 2003-2007 5.9L Cummins. Number 23 from image ONLY. Does not include nut (Number 24). Cummins part number: 3595658..

DODGE 5.9L CUMMINS DIESEL 2500/3500 (ALL CAB AND BED LENGTHS - 4x4 APPLICATIONS ONLY)  4" ALUMINIZED - PERFORMANCE DIESEL EXHAUST - DOWNPIPE WITH HX40 TURBO FLANGEIMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a loo..

Air Transfer Tube, includes O-Ring & V-Band Clamp, Fits A5K, HX60, & S400 Compressor outlets. Also known as a compressor outlet discharge elbow. 3 inch outlet. Includes:90 Degree Air Transfer Tube, Cummins: 3957380Sealing O-Ring, Cummins: 3066211V-Band Clamp, Cummins 3067979..

Dodge 94-2002 Cummins HX40, Turbo 4" DownpipeFits the HTT HTB line of turbos, along with HX40 turbos. 4" flat flange downpipe. Does not include clamps! This pipe is aluminized.IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to Califo..

1994-2002:2nd gen style downpipe with HE351 flange welded on instead of standard HX40 style downpipe. Fits HE351 and large 4.4" flange turbos on 2003-2007. Has flared end for easy install. Use for HE351 install on 2nd gen truck or can also be used on 2nd gen manifold swap for 3rd gen truck. (cla..

This is a non-returnable partThis v-band clamp to be used with Hx40 flange, part # DEMVC400hX40 **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..

DODGE 5.9L CUMMINS DIESEL 2500/3500 (ALL CAB AND BED LENGTHS - 2x4 APPLICATIONS ONLY)  4" ALUMINIZED - PERFORMANCE DIESEL EXHAUST - DOWNPIPE WITH HX40 TURBO FLANGEIMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a loo..

03-07 Dodge 5.9L Cummins Turbine Housing to Cast Iron Elbow V-Band Clamp Image may not be actual part. Part numbers:  5159965AA Clamp5174049AA Nut..

Choose your flange. Choose if you'd like to weld yourself. Choose if you need a clamp (does not include a clamp, unless specified). Done.  2nd Gen Style Downpipes provide less restriction for higher performance in your 94+ Cummins. One piece 4" Mandrel bent tubing is the go to for high powered vehi..

Air Transfer Tube O-Ring ONLY! Cummins part number: 3066211Includes number 1 from image ONLY!..

Clamps cast iron elbow to exhaust downpipe. Image may not be actual part. Part number 52103596AC...

Stainless HX 40 v-band clamp for Holset HX40 and Schwitzer / Borg Warner S300 variants with 4" HX40 exhaust outlet. Includes ONE clamp.  Part number: HX40CL..

The simple, effective way to connect exhaust system components. Replaces U-bolts and clamps. Patented design makes for fast, easy and accurate installation. There is no need to separate pipes or exhaust members before clamping.Stainless Steel for long life High-strength plated fasteners can be ..

HX40 Turbo-Exhaust V-Band Clamp Picture for representation only. ..

This is a non-returnable part5" V-clamp for HT3B or S400 exhaust outlet. For use with #0406B. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..

89-91 Dodge Non-Intercooled Cummins 3" Aluminized Downpipe..

Twin Turbo Hot Pipe Twin Turbo Hot Pipe. This connects the top turbine outlet to the bottom turbine inlet. It is made of thick tubing and heavy flanges . Designed for  standard gated top turbo and T6 lower turbo. If you are not sure, please contact us first! Includes stainless T6 gasket a..

HX40 V-band Clamp fits HX40 flange.Fits 4" tube diameter Stainless Diesel part number: HX40VBC-413..

91.5-93 First Generation Dodge Intercooled Cummins 3" Aluminized Downpipe Part number: EXPEMDODTWIN..

Features:• Replaces the factory turbine elbow• Constructed of Durable ductile iron• The turbine elbow mounts to either the OE or aFe BladeRunner turbo (P/N: 46-60050) without any modification Hassle-Free Installation;The replacement turbine elbow mounts directly to the stock or aFe's upgraded turbo..

Please call for availibility. Dodge 94-2002 Cummins HX40, HTB Turbo 4" DownpipeFits the HTT HTB line of turbos, along with HX40 turbos. 4" flat flange downpipe. Swedged so your 4" exhaust pipe slides in.THIS IS NOW THE BEST FITTING PIPE IN THE INDUSTRY.Fits our HTB2 / High Tech 71 Series 2nd gen t..

Cummins Part Number: 3905216..

Air Transfer Tube  V-Band Clamp ONLY, Fits A5K, HX60, & S400 Compressor outlets. OD of the flange on the turbo this fits is about 4.25 inches. Fits the transfer tube 3 inch outlet. Includes:V-Band Clamp, Cummins 3067979..

304 Stainless downpipe with Flat "V"  flange.  Designed to fit in 3rd & 4th generation Ram trucks using a 2nd generation turbo location. CNC bent for precise fitment.Comes with v-band outlet clamp and a 4" Pre-Formed band clamp.NOTE: Flat "V" is the standard Borg Warner S400 T4 Turbine Housing Outle..

This is a non-returnable partThis part is jigged and welded. You'll get a 5" V-Band Clamp and a 5" Seal Clamp for install. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ..

• Replaces the factory turbine elbow• Constructed of durable ductile iron• The turbine elbow mounts to either the OE or aFe BladeRunner turbo without any modification. Hassle-Free Installation;The replacement turbine elbow mounts directly to the stock or aFe's upgraded turbo for a hassle-free insta..

Center Section to Turbine Housing V-Band Clamp for the HE341/HE351 turbo on 2003-2020 5.9L/6.7L Cummins. Number 23 from image ONLY. Does not include nut (Number 24). Mopar part number: 68378056AA..

Clamps cast iron exhaust elbow to turbo exhaust housing. This clamp fits 07.5-2018 Ram 6.7L Cummins diesel trucks.  Also fits the HE300VGT (13+ trucks) Mopar: 6821065AA  ..

This elbow pipe blanket was originally designed to fit on the  HE351CW and Hy35W turbocharger downpipe elbow that is found on OEM 04.5-09 DODGE RAM trucks with the 5.9L 24V.  The blanket efficiently covers the necessary bits of downpipe elbow while also staying close to the housing. We found however..

This elbow pipe blanket was originally designed to fit on the  HE351CW and Hy35W turbocharger downpipe elbow that is found on OEM 04.5-09 DODGE RAM trucks with the 5.9L 24V.  The blanket efficiently covers the necessary bits of downpipe elbow while also staying close to the housing.   We found how..