Shop By Category
Your Cart

03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit

03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit
03-07 Ram 5.9L Cummins S400/Stock Twin Kit Turbo Install Kit

Available Options

$2,226.15

  • Part Number: WCF100567
  • Est. Ship Time: Usually Ships in 12-16 Business Days

2003-2007 5.9L Cummins S400/Stock Compound Turbo Kit. 1000 RWHP capable depending upon turbo and fuel system modifications. Recommended for daily driver work trucks and tow rigs looking for increased horsepower, better fuel mileage, and superior EGT control with stock-like turbo spool characteristics.

Install kit only does not include turbos. Requires custom tuning and utilizes the OEM 3rd generation exhaust manifold. Aftermarket manifolds must be sent in to confirm compatibility.


Kit Includes:

- 5" Intake

- Dry Air filter

- Outerwear's Pre-Filter Cover

- Stainless Steel Oil Feed and Drain Lines with Fittings

- 4" Turbo Down Pipe

- 3" Turbo Hot Side Cross Over Pipe

- 3" Cold Charge Pipe Between Turbos

- O-ring seals

- Silicone Boots

- T-Bolt Clamps

- V-Band Clamps

- Install Hardware

- Heat Wrap & Clamps

- High Temp Black Ceramic Coating on Hot Side and Down Pipe

- Powder Coating

Recommended Combinations:


S475 / Stock Holset Turbo - Up to 750 RWHP with Supporting Modifications - Best Turbo Spool, performs well on stock fuel setups.


S480 / Stock Holset Turbo - 800+ RWHP Capable with Supporting Modifications - Better top end performance that sacrifices a bit of spool on the lower end when compared an S475/stock setup.


S480 / 63 or 64 Upgraded Drop In Turbo - 900+ RWHP Capable with Supporting Modifications - Improved top end power with moderate spool characteristics


S480 / 67 Upgraded Drop In Turbo - 1000+ RWHP Capable with Supporting Modifications - Best Top End Power, sacrifices low end power and turbo spool - Manual trans trucks will allow best use of power band for this setup. Not recommended for tow rigs.


***This kit is designed to be used with the OEM exhaust manifold. If you would like to use an aftermarket OEM replacement style manifold like a Steed Speed 3rd Gen T3, you MUST send it in for kit to be custom built and your lead time does not start until the manifold is in our possession.***


***Retains passenger side factory battery location***

If you are unsure please call to discuss correct turbo sizing/options.

This does not include the option to color turbo housings.


Click here for Wehrli powder coat samples

Wehrli Custom Powder Coating is housed under the same roof as Wehrli Custom Fabrication. This has Enabled them to provide exceptional turn around time and Quality Control of our Finished Fabricated Components. Wehrli can powder coat items of all sizes. Above is Pictures of our Most Popular Colors that we nearly always have in stock. if you're looking for something one of a kind or different. For custom colors, please enter a powder coat color of your choice above. Shipping times and pricing may be adjusted according to color choice.

Available in many custom powder coat colors to customize your engine bay to your liking.

 
Lame California Prop 65 Notice