-80x80.jpg)
Clutches for the NV4500 transmission found in some 94-2004 Dodge 2500 & 3500 trucks.
-180x180w.jpg)
Brand: South Bend Clutch
Part Number: 13125-FER
13125-FER ---- 13" Feramic clutch kit w/o flywheel 550 hp 1100 trq. Not recommended for towing or stock applicationsStage: 3Use: FEFt-Lbs: 550hp, 1100 torqueSouth Bend: 13125-FER..
$962.40
Brand: South Bend Clutch
Part Number: 13125-OR
13125-OR ---- 13" Full Organic clutch kit w/o flywheel 400 hp 800 trq 15k towing capacity.Stage: 1Use: ORGANICFt-Lbs: 400hp, 800 torqueSouth Bend: 13125-OR..
$566.12
Brand: South Bend Clutch
Part Number: SSDD3600-CB5K
For your heavily modified 5.9L Cummins 5-Speed, South Bend offers the SSDD3600-CB5K Super Street Dampened Dual Disc Clutch. This stage 5 clutch, which can handle 850HP & 1400 TQ, has a new 1.375" input shaft, a new billet flywheel, an alignment tool, and high-performance organic facings. This cl..
$2,490.91
Brand: South Bend Clutch
Part Number: ISK1.375
Increase strength in your 1994-2003 Dodge 5.9L Cummins NV4500 Transmission with the South Bend ISK1.375 Input Shaft Upgrade Kit. This input shaft upgrade kit is for use on clutches that require 1-3/8" input shafts. FEATURES:1.375" Input Shaft For NV4500 TransmissionsPart Number: ISK1...
$452.89
Brand: South Bend Clutch
Part Number: SDD3250-5K
Tow up to 30K pounds in your 1994-2004 Dodge 5.9L Cummins With the 5-Speed or the Non-High Output 6-Speed Transmission by installing the South Bend SDD3250-5K Street Dual Disc Clutch w/ 1.375 Input Shaft Upgrade Kit. This direct fit replacement clutch features a 13" diaphragm style 3250lb. pressure ..
$1,811.57
Brand: South Bend Clutch
Part Number: 13125-OK-HD
This is the heavy duty design of South Bend's 13" clutch kit with a 3" wide premium Organic lining. Perfect for moderate tuning and heavy towing while maintaining smooth engagement. Hydraulic upgrade NOT included. FEATURES: Smooth Engagement3" Wide Organic Lining Great for Moderate Po..
$962.40
-250x250w.jpg "94-03 Dodge NV4500 5 Speed Valair Dual Disc Clutch for Up to 650HP")
Brand: VALAIR Clutches
Part Number: NMU70NV45DDSN
Dual Disc Kit - up to 650HPCeramic ButtonsNodular Iron Flywheel and Billet Floater platePressure Plate Load - 3800#Kit includes: New Nodular Sprung hub NV4500 Dual Disc Flywheel 3800# Pressure Plate Ceramic Clutch Discs Release Bearing HD Pilot Bearing Modified Clutch Fork Bolt Kit Alignment ToolREQ..
$1,181.29
Brand: VALAIR Clutches
Part Number: NMU70279-01-5SCE
13" x 1.25" Stock Organic ReplacementPremium Brass Woven Organic FacingsHD Spring HubRated @ 350HP / 800 ft lbs Torque3400# Pressure PlateKit includes: Dual Drilled 5 Speed Flywheel 3400# Pressure Plate Clutch Disc Release Bearing Pilot Bearing Alignment Tool..
$739.19
Brand: VALAIR Clutches
Part Number: NMU70NV45DDSN-ORG
Dual Disc Kit - up to 550HP
Organic Facings
Nodular Iron Flywheel and Billet Floater plate
Pressure Plate Load - 3400#
Kit includes:
New Nodular Sprung hub NV4500 Dual Disc Flywheel
3400# Pressure Plate
Organic Clutch Discs
Release Bearing
HD Pilot Bearing
Modified Clutch..
$1,181.29
Brand: VALAIR Clutches
Part Number: NMU70279-06-5SCE
13" x 1.25" Stock Organic ReplacementKevlar / Ceramic ButtonsHD Spring HubRated @ 500HP / 1000 ft lbs Torque3400# Pressure PlateKit includes: Dual Drilled 5 Speed Flywheel 3400# Pressure Plate Clutch Disc Release Bearing Pilot Bearing Alignment ToolThis is not a Dual Disc Clutch. Picture is showing ..
$1,019.38
Brand: VALAIR Clutches
Part Number: QNV45DDSN-ORG
If you have a Stock - 500HP truck and tow alot this is the only way to go. This clutch has a very smooth engagement.
The Ultimate Towing Clutch just got Better!
Features:
Nodular iron flywheel
Spring hub design
Premium brass woven facings
Billet floater plate (will not break like..
$1,415.20
Brand: South Bend Clutch
Part Number: 13125-OK
Get more from the clutch in your 1989-2005 Dodge Cummins 5.9L 1989-2005 With 5 Speed Trans (350 HP, 750 FT. LBS.)* when you install the South Bend Dyna Max 13" Upgrade Clutch Kit 13125-OK. The Dyna Max 13" Upgrade Clutch Kit is designed to cure premature disk failure due to high horsepower and heavy..
$849.18
Brand: South Bend Clutch
Part Number: 13125-OR-HD
This is the heavy duty design of South Bend's 13" clutch kit with a 3" wide premium Organic lining. Perfect for moderate tuning and heavy towing while maintaining smooth engagement. Hydraulic upgrade NOT included. FEATURES: Smooth Engagement3" Wide Organic Lining Great for Moderate Po..
$679.34
Brand: VALAIR Clutches
Part Number: NMU70279-04-5SCE
13" x 1.25" Stock Organic Replacement (for stock 1.25" input shaft)Ceramic ButtonsHD Spring HubRated @ 600HP / 1100 ft lbs Torque3400# Pressure Plate
-Not for Towing
Kit includes:
Dual Drilled 5 Speed Flywheel
3400# Pressure Plate
Clutch Disc
Release Bearing
Pilot Bearing
Alignment ..
$817.54
Brand: South Bend Clutch
Part Number: 1947-OK
1947-OK Single Disc clutch rated for 400 hp, 800 ft. lbs. torque -
Includes 13" flywheel, pressure plate, clutch aligment tools, & throwout bearing.
Designed for NV4500's that have been already been upgraded to the 1 3/8" input shaft.
This Dyna Max kit fea..
$849.18
Brand: South Bend Clutch
Part Number: 0090
Ready to get the job done, the South Bend Dyna Max 12 1/4" Clutch Kit MU 0090 Rally is a great addition to your 1989-2005 Dodge Cummins 5.9L - With 5 SPEED TRans (350 HP 700 FT. LBS.)*. The Dyna Max 12 1/4" Clutch Kit is expertly engineered for an incredibly smooth engagement and a p..
$481.20
Brand: VALAIR Clutches
Part Number: NMU70119
12 & 24 Valve Cummins fitted with NV4500 Transmission.
Organic Facings
OEM Style Hub
Rated @ Stock HP
Kit includes:
Pressure Plate
Clutch Disc
Release Bearing
Pilot Bearing
Alignment Tool..
$316.73
Brand: VALAIR Clutches
Part Number: NMU70119-04
12 & 24 Valve Cummins fitted with NV4500 Transmission.
12.25" x 1.25" Performance ReplacementCeramic ButtonsHD Spring HubRated @ 550HP / 1000 ft lbs Torque3800# Pressure Plate
-Not for Towing- This clutch is NOT made to slip, so it will suck for a towing application. If you try to tow with it and..
$643.28
Brand: South Bend Clutch
Part Number: 13125-FEK
The South Bend Dyna Max 13" Upgrade Clutch Kit 13125-FEK is a great addition to your 1989-2005 Dodge Cummins 5.9L - With 5 Speed Trams (550 HP, 1100 FT. LBS.)*. Featuring a steel construction, the Dyna Max 13" Upgrade Clutch Kit is a direct replacement for the OEM clutch. The pressure plat..
$1,188.84
Brand: South Bend Clutch
Part Number: DDC3850-5
Dual Disk South Bend Clutch 3850lb Plate LoadThis clutch will hold 950HP at the wheels.Lever type pressure plate with heavy increase in pedal pressure.All the clutch components in this assembly are made of steel. The center plate is lugged to fit the flywheel. This complete clutch has no ..
$2,264.47
Brand: South Bend Clutch
Part Number: 13125-OFEK
Improve your 1989-2005 Dodge Cummins 5.9L – With 5 Speed Trans (450 HP, 900 FT. LBS.)* towing ability when you install the South Bend Dyna Max 13" Upgrade Clutch Kit 13125-OFEK. Constructed from durable steel, the Dyna Max 13" Upgrade Clutch Kit is a complete kit that is ready to get the job done. T..
$1,075.62
Brand: South Bend Clutch
Part Number: 1947-OFEK
Replace the clutch in your 2000.5-2005.5 Dodge Cummins 5.9L With NV5600 Trans. 475 HP, 1000 FT. LBS. Torque with the South Bend Dyna Max Upgrade Clutch Kit 1947-OFEK (Incl. Flywheel). The pressure plate found in the Dyna Max Upgrade Clutch Kit has been modified for higher plate load and smoothness o..
$1,075.62
Brand: VALAIR Clutches
Part Number: NMU70119-06
12 & 24 Valve Cummins fitted with NV4500 Transmission.
12.25" x 1.25" Performance ReplacementCeramic & Kevlar ButtonsHD Spring HubRated @ 500HP / 950 ft lbs Torque3800# Pressure Plate
Kit includes:
Pressure Plate
Clutch Disc
Release Bearing
Pilot Bearing
Alignment Tool
*This is not..
$818.71
Brand: VALAIR Clutches
Part Number: NMU70NV45TRIPLE-NW
12.00" x 1.375" Performance Replacement Street Triple Disk Clutch Ceramic Button Rated @ 1000HPPressure Plate: 3250#
NV4500 equipped trucks MUST have the upgraded 1-3/8" Input Shaft for these kits to work.
-SFI Approved
Kit includes:
Billet Flywheel
3250# Pressure Plate
Floater Plates
..
$2,297.71
Brand: VALAIR Clutches
Part Number: NMU70279-5SCE
13" x 1.25" Stock Organic ReplacementOrganic FacingsOEM Style HubRated @ Stock HP3400# Pressure PlateKit includes: Dual Drilled 5 Speed Flywheel 3400# Pressure Plate Clutch Disc Release Bearing Pilot Bearing Alignment Tool..
$683.62
Brand: VALAIR Clutches
Part Number: NMU70119-04-CDONLY
12 & 24 Valve Cummins fitted with NV4500 Transmission.
12.25" x 1.25" Performance ReplacementCeramic ButtonsHD Spring HubRated @ 550HP / 1000 ft lbs Torque3800# Pressure Plate
-Not for Towing
Clutch Disc Only
Image is entire kit
..
$400.00
Brand: Haisley Machine
Part Number: HMR STREET TWIN
SFI Approved Spec 1.2 Certified FlywheelStreet Driving, Heavy Towing Not recommend for sled pullingUp to 4000RPMsClutch comes set up and assembled with everything you'll need for installation Billet Steel Flyhweel, SFI 2 Organic Discs with Hardened Hubs Center Plate Diaphragm Pressure Plate Th..
$1,612.40
Brand: South Bend Clutch
Part Number: SDD3250-5
The South Bend SDD3250-5 Street Dual Disc Clutch is an excellent upgrade from the stock clutch in your modified 1994-2004 Dodge 5.9L Cummins With the 5-Speed or the Non-High Output 6-Speed Transmission. This clutch features half organic, half ceramic clutch material with the organic lining facing th..
$1,358.68
Brand: South Bend Clutch
Part Number: SSDD3600-CB5
Stage 6 South Bend Clutch 850HP 1400TQ
Use:
30K Towing Capacity
Occasional Competition Use
Part Number: SSDD3600-CB5..
$2,038.02
-250x250w.jpg "94-03 Dodge NV4500 5 Speed Valair Quiet Spring Hub Dual Disc")
Brand: VALAIR Clutches
Part Number: QNV45DDSN
The Ultimate Towing Clutch just got Better!
Features:
Nodular iron flywheel
Spring hub design
Premium brass woven facings
Billet floater plate (will not break like other cast iron pieces)
3800 lb. diaphragm pressure plate
HD roller pilot bearing
Includes all hardware for insta..
$1,415.20
Brand: VALAIR Clutches
Part Number: NMU70NV45TRIPLE-COMP
Discontinued (Updated 5/30/25)
12.00" x 1.375" Performance Replacement
Competition Triple Disk- NOT FOR STREET USE!
Sintered Iron Disk
Rated @ 1200+HP
Pressure Plate: 4000# Competition lever
NV4500 equipped trucks MUST have the upgraded 1-3/8" Input Shaft for these..
$0.00
Brand: South Bend Clutch
Part Number: SDD3250-5K-ORG
The South Bend SDD3250-5K-ORG Organic Street Dual Disc Clutch with Input Shaft Upgrade features organic facings for smooth engagement in your 1994-2004 Dodge 5.9L Cummins NV4500 5-Speed Transmission. From daily-driven street performance, to towing, the South Bend Organic Dual Disc offers maximum hol..
$1,811.57
Brand: Haisley Machine
Part Number: HMR STREET DRAG CLUTCH
SFI Approved Spec 1.2 Certified Flywheel
Dodge Cummins 1994+
Street Driving, Heavy Towing, Horsing Around, & Drag Racing
For light sled pulling only, 1 or 2 times a year in the right gear
Up to 4000RPMs
All units have been hand built and tested for proper release before shipping
1994-200..
$1,824.32
Brand: South Bend Clutch
Part Number: DDC3600-5
Dual Disk South Bend Clutch 3600lb Plate LoadThis clutch will hold 800HP at the wheels.Lever type pressure plate with heavy increase in pedal pressure.All the clutch components in this assembly are made of steel. The center plate is lugged to fit the flywheel. This complete clutch has no ..
$2,264.47
Backordered
Brand: VALAIR Clutches
Part Number: NMU70NV45TRIPLE-NW-SI
12.00" x 1.375" Performance Replacement
Sintered Iron Disk
NV4500 equipped trucks MUST have the upgraded 1-3/8" Input Shaft for these kits to work.
Rated @ 1200HP
Pressure Plate: 3000#
-SFI Approved
Kit includes:
Billet Flywheel
Floater Plates
3800#..
$2,725.00
Brand: South Bend Clutch
Part Number: SDD3250-5-ORG
South Bend Clutch 13” diaphragm style organic clutch with 3250lb pressure plate offers maximum holding power with easy pedal effort.
FEATURES
Clutch discs are a dampened free travel design similar to a semi clutch to help reduce gear roll-over.
12 Organic Buttons on each clutch disk face
Neop..
$1,358.68
Brand: Haisley Machine
Part Number: HMR CP3/3L
Discontinued (12/13/2023)
Clutches come complete with pressure plate, 2 discs, floater plate, flywheel, pilot bearing installed, throwout bearing.
Works with nv4500 5 speed only
3 lever pressure plate
Same pressure plate as 2 disc comp puller
Must also purchase, to use..
$0.00
Brand: Haisley Machine
Part Number: HMR SP3
DISCONTINUED!HMR spacer plate for 3 disc clutch that utilizes a LONGER input shaft on a NV4500.Not required for 3 disc clutches that work with a standard length input shaft.
Engine adapter, exchange wiith $300 core charge
Haisley part number: HMR SP3..
$590.29
Brand: Kenny's Pulling Parts
Part Number: KPP3DISCSTREETNV4500
Product Unavailable (Updated 7-15-25)
Fits 1994 - 2005 NV4500 - NV5600
HP Rating: 900
12 IN. 5135 Sinterned iron disc, these last longer for extreme sled pulling & shift better due to flatness under heat
3400LBS diaphragm pressure plate
Throwout Bearing
1998.5-2005 models req..
$54.00
Brand: Kenny's Pulling Parts
Part Number: KPP3DISCCOMPNV4500
Product Unavailable (Updated 7-15-25)
FITS 1994 - 2005 NV4500 - NV5600
Hp rating: 1300
Weighted pressure plate
Includes modified release bearing arm
Requires HD hydraulics, sold separately.
Part number: KPP3DISCCOMP..
$54.00
Showing 1 to 40 of 40 (1 Pages)