07.5-21 Dodge Ram 6.7L Cummins 68RFE ATS BilletProof Billet Pump Plate (plate only)
$459.99
- Part Number: 314-190-2326
- Est. Ship Time: Contact To Confirm Availability
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
ATS BilletProof 68RFE Billet Pump Plate (plate only)
Fitment: 2007½-current Dodge Ram 6.7L Cummins
Fitment: 2007½-current Dodge Ram 6.7L Cummins
The heart of the 68-RFE transmission is the pump, installing the ATS BilletProof 68- RFE Billet Pump Housing is one of the key elements to having a reliable 68-RFE transmission. This part comes complete with a serviceable pump drive bushing. You will need to remove the two idler gear pins from your original pump and press them into the new billet pump housing.
The factory 68-RFE pump housing is not large enough to supply the transmission with the required oil volume that it needs to keep pressure high when the engine is at a low RPM. This causes the 68-RFE transmission to run low on oil pressure when pulling heavy loads in 4th, 5th and 6th gears. The low oil volume and pressure causes the overdrive clutches to slip causing 5th and 6th gear failure. The other issue with the factory pump is the cast material that is used is weak and unstable. The factory pump also does not have a pump bushing, instead they use the factory cast aluminum as the pump bushing surface. The inexpensive cast material warps over time causing hydraulic cross leaks between the pump half and the steel separator plate. These cross leaks cause many issues that end in transmission failure.
Some of these issues are transmission overheating, converter clutch applied when the vehicle is stopped, rationality codes, cooler flow loss, and delayed engagement to name a few. ATS has redesigned the 68-RFE pump to eliminate all of these issues, and it’s manufactured out of billet tool-grade aluminum. The tolerances are controlled to provide maximum oil pressure and volume. The tight tolerances guarantee our billet pump will provide 100% of the pressure that the TCM is requesting during low engine RPM operation ensuring the clutch packs have adequate pressure to keep them clamped even in the worse conditions such as hot operation and low engine RPM while pulling extreme loads.
The factory 68-RFE pump housing is not large enough to supply the transmission with the required oil volume that it needs to keep pressure high when the engine is at a low RPM. This causes the 68-RFE transmission to run low on oil pressure when pulling heavy loads in 4th, 5th and 6th gears. The low oil volume and pressure causes the overdrive clutches to slip causing 5th and 6th gear failure. The other issue with the factory pump is the cast material that is used is weak and unstable. The factory pump also does not have a pump bushing, instead they use the factory cast aluminum as the pump bushing surface. The inexpensive cast material warps over time causing hydraulic cross leaks between the pump half and the steel separator plate. These cross leaks cause many issues that end in transmission failure.
Some of these issues are transmission overheating, converter clutch applied when the vehicle is stopped, rationality codes, cooler flow loss, and delayed engagement to name a few. ATS has redesigned the 68-RFE pump to eliminate all of these issues, and it’s manufactured out of billet tool-grade aluminum. The tolerances are controlled to provide maximum oil pressure and volume. The tight tolerances guarantee our billet pump will provide 100% of the pressure that the TCM is requesting during low engine RPM operation ensuring the clutch packs have adequate pressure to keep them clamped even in the worse conditions such as hot operation and low engine RPM while pulling extreme loads.
⚠NOTE:
This is the billet pump housing only. This part is intended to be used with the factory pump gears and idler pins. We offer the complete pump assembly, separator plate and pump gears as a different part number.
This is the billet pump housing only. This part is intended to be used with the factory pump gears and idler pins. We offer the complete pump assembly, separator plate and pump gears as a different part number.
ATS: 3141902326
Backordered with no ETA (Updated 1/12/26)
Fits: 2007.5-2018 Dodge 6.7L Cummins
Upgrade the transmission in your 2007.5-2018 Dodge 6.7L Cumm..
$99.00
Fits: 2007.5-2018 Dodge 6.7L Cummins(Equipped With 68RFE Transmission)The Sun Coast Billet 4C Snap Ring Retainer is a massive upgrade from the st..
$59.00
Product Description
68RFE Billet Steel Center Support and 4th Clutch Housing *Patent Pending*
The 68RFE stock center support has numerous flaws ..
$899.00
68RFE Low Reverse Sprag
The stock 68RFE low reverse sprag is one of the weakest links in the transmission. Boosted launches will quickly flip the d..
$699.00
Please note: A 20% cancellation fee will be charged for canceled Randy's Transmission items after purchase. If lead time is a concern, please contact ..
$200.00
We are proud to present the strongest and only true billet forged overdrive clutch hub for the 68RFE. Our shaft fits ALL 68RFE’s both stock and afterm..
$895.00
Fits: 2007.5-2021 Dodge 6.7L Cummins (Equipped with 68RFE Transmission)The Sun Coast Billet Snap Ring Retainer can help stop catastrophic damage ..
$59.00
ATS Aurora AFR 3000 Aftermarket Factory Replacement TurbochargerFitment: 2001-2004 GM 6.6L DuramaxPart Number: 2023024248If you want a turbo that..
$2,479.99
ATS BoostFooler Electronic Fuel Regulator
Fitment: 2001-2010 GM 6.6L Duramax
The BoostFooler Electronic Fuel Regulator will allow..
$74.99
Fits: 2001-2010 6.6L Duramax LB7/LLY/LBZ/LMMThis billet steel input shaft is made to fix a weak link in your GM Duramax truck with Allison transm..
$814.99
-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS..
$324.99
2003-2007 Dodge 5.9L Common Rail Cummins, 2-Piece Exhaust Manifold, T3, NON-Wastegated, Comes Assembled with Black High Temperature Coating and Pre-T..
$609.99
ATS Pulse Flow Exhaust Manifold Kit Fits 2003-2007 5.9L Cummins 2-Pc T3 With Gaskets Premium Hardware
Since ATS released the first Pulse Flow Manif..
$709.99
ATS Pulse Flow Exhaust Manifold Kit Fits 2003-2007 5.9L Cummins 2-Pc T3 With Turbo Flange Hardware
Since ATS released the first Pulse Flow Manifold..
$564.99
ATS Fuel Rail Pressure PlugFitment: 2003-07 Dodge 5.9L CRA common failure of the Ram 5.9L Common Rail Cummins is the pressure relief valve. These reli..
$34.99
Fits:
2003-2007 Dodge 5.9L Cummins
This ATS 2049202272 Pulse Flow Exhaust Manifold is the perfect component for your truck! This Manifold ..
$609.99
ATS Five Star Viskus Drive Torque ConverterStandard in all transmission packages, and available individually, is the ATS Five Star Torque Converter. T..
$1,509.99
Fits: 2003-2019 Dodge 2500/3500 (Equipped With 11.5 AAM Differential)2.5 quart fluid capacity over stockOptimal gear lubricationEasy fluid service wit..
$289.99
Fits: 2004.5-2007 5.9L Cummins
Features:
Progressive line rise
Allows 1st-2nd gear lock-up
Optimized to work with 3000 rpm governor spring..
$704.99
ATS Fuel Rail Pressure PlugFitment: 2004½-2010 GM 6.6L Duramax (LLY, LLY/LBZ, LLM) A common failure of the GM LLY, LLY/LBZ, LLM 6.6L Duramax..
$34.99
ATS Aurora VFR 3000 Stage 1 Turbocharger
Fitment: 2004.5-2010 GM 6.6L Duramax
Part Number: 2023024290
If you want a turbo that..
$2,304.99
ATS Aurora VFR 4000 Stage 2 TurbochargerFitment: 2004.5-2010 GM 6.6L DuramaxPart Number: 2024024290If you want a turbo that has a clean install, ..
$2,694.99
Please note: A 20% cancellation fee will be charged for canceled Randy's Transmission items after purchase. If lead time is a concern, please contact ..
$950.00
Many years back we (circa 2014) RevMax began using billet valve bodies in their 68RFE 1000 series transmissions. These units featured on demand lockup..
$395.00
Please note: A 20% cancellation fee will be charged for canceled Randy's Transmission items after purchase. If lead time is a concern, please contact ..
$950.00
Fits: 2003-2007 Dodge Ram 2500/3500 (48RE Transmission)
This 48RE-HD2 Reprogramming Kit is built for hard working 2003-2007 Dodge Ram 2500/350..
$159.43
Positive shifts, increased clutch holding power!
Valve Body - 2005-2007 Dodge 48RE
Features:
Anti-Shuttle technology with higher pressures
New s..
$756.95
***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches***
48RE Kit Includes:
4 Forward Clutches/ 3 S..
$1,150.00
***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches***
48re Kit Includes:
4 Forward Clutches/ 3 S..
$795.00
All new for the 2003-2007 Dodge RAM! Control your transmission temperatures and tow with confidence with the latest improvement for your Dodge Ram fro..
$899.00
Looking to bypass the factory heat exchanged on your truck? If so then order this bypass plug kit from Fleece.
Heat exchanger bypass kit for use wh..
$13.99
The overdrive housings on 48RE’s are known for cracking; usually due to excessive vibration from a bad u-joint. This is a genuine Mopar product...
$683.87
Please note: A 20% cancellation fee will be charged for canceled Randy's Transmission items after purchase. If lead time is a concern, please contact ..
$925.00
Fits: 2003-2007 Dodge 5.9L CumminsPrevents cracking of the overdrive tail housing - Quick installation, a few minutes and your done- Fits between..
$220.00
Fits: 2003-2009 Dodge 5.9L/6.7L Cummins
This Full Send Diesel billet heat exchanger designed for 2003-2009 Dodge Cummins has effec..
$649.99
Fits: 2003-2009 Dodge 5.9L/6.7L Cummins
Looking to upgrade your transmission cooling system on your 2003-2009 Dodge Cummins? FS..
$549.99
Fits: 2004.5-2007 5.9L Cummins
Features:
Progressive line rise
Allows 1st-2nd gear lock-up
Optimized to work with 3000 rpm governor spring..
$704.99
