Dodge 47RH, 47RE, 48RE, & 68RFE Automatic Transmission Parts
Heavy Duty Shafts, Shift Kits, Upgraded Internal Parts, & more for the 1989-2018 Dodge Ram 5.9L & 6.7L Cummins trucks equipped with the 47RH, 47RE, 48RE, & 68RFE transmissions.
Full Manual Valve Body for 03-07 5.9 Cummins with 48REThe same Valve Body used in 'Red Delicious', our 2700+ HP 06 CumminsBuilt, flow tested, & calibrated in house.*DOES NOT INCLUDE ROOSTER COMB*PLEASE READ CRUCIAL INFORMATION BELOWCRUCIAL INFORMATION:THIS IS A PRODUCT INTENDED FOR BUILT TRANSMI..
Many years back we (circa 2014) RevMax began using billet valve bodies in their 68RFE 1000 series transmissions. These units featured on demand lockup and the rigidity of a billet channel casting. These were offered for a short time by us but the market was not yet open to paying for what was though..
Full Manual Valve Body for 94-02 Cummins with 47REThe same Valve Body used in 'Red Delicious', our 2700+ HP CumminsBuilt, flow tested, & calibrated in house.*DOES NOT INCLUDE ROOSTER COMB*CRUCIAL INFORMATION:THIS IS A PRODUCT INTENDED FOR BUILT TRANSMISSIONS AND RACING APPLICATIONS ONLY! TR..
Fits: 2003-2007 Dodge Ram 2500/3500 (48RE Transmission)This 48RE-HD2 Reprogramming Kit is built for hard working 2003-2007 Dodge Ram 2500/3500 (48RE Transmission) that tow and haul heavy loads. Common issues on the 48RE transmission are TCC slip or shudder, direct clutch failure, as well as tor..
***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches***
48RE Kit Includes:
4 Forward Clutches/ 3 Steels
6 Direct Clutches/ 6 Steels with Machined Pressure Plate and Snap Ring
6 Overdrive Clutches/ 6 Steels with Machined Pressure Plate
10 Over..
***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches***
48re Kit Includes:
4 Forward Clutches/ 3 Steels
6 Direct Clutches/ 6 Steels with Machined Pressure Plate and Snap Ring
6 Overdrive Clutches/ 6 Steels with Machined Pressure Plate
10 Over..
All new for the 2003-2007 Dodge RAM! Control your transmission temperatures and tow with confidence with the latest improvement for your Dodge Ram from Fleece Performance. Engineered from the ground up to provide you with the most efficient and highest performing replacement transmission coole..
Looking to bypass the factory heat exchanged on your truck? If so then order this bypass plug kit from Fleece.
Heat exchanger bypass kit for use when installing a coolant bypass kit or needing to bypass the factory heat exchanger mounted on the driver's side of the engine. Includes 2 caps f..
The overdrive housings on 48RE’s are known for cracking; usually due to excessive vibration from a bad u-joint. This is a genuine Mopar product. Brand new, not re-conditioned.Mopar: 5093166AA..
Build Features:
More aggressive pressure curve and MAX main line set to 185 psi in all forward gears
As much as 75% increase in torque capacity for all the clutch elements including the TCC clutch.
Triple valve body separator plate which allows you to achieve TCC operation in all forward g..
Fits: 2003-2007 Dodge 5.9L CumminsPrevents cracking of the overdrive tail housing - Quick installation, a few minutes and your done- Fits between transfer case and existing skid plate- Uses a very popular universal GM RWD mount (included)- All necessary hardware is included The 48RE Dodge ..
Fits: 2003-2009 Dodge Cummins 5.9L/6.7L
This Full Send Diesel billet heat exchanger designed for 2003-2009 Dodge Cummins has effectively resolved the persistent heat exchanger issues. Our billet heat exchanger offers all the benefits of efficient heat transfer and cooling, while ensuring ab..
Backordered Until March 2025 (Updated 1/9/2025)
Fits: 2003-2009 Dodge Cummins 5.9L/6.7L
We have vigorously designed & tested the perfect transmission cooling setup. Whether you're towing, racing or sled pulling. FSD's elite cooler setup is exactly what you need. We managed to f..
Fits: 2004.5-2007 5.9L CumminsFeatures:Progressive line riseAllows 1st-2nd gear lock-upOptimized to work with 3000 rpm governor springsIncreased reliabilityElectronics not includedThe throttle valves (TV Valve) in a transmission's valve body control shift timing between gears through the constrictio..
This is the most simple DIY kit on the market! We have taken all the guesswork on how to rebuild your 68RFE. Everything that can be pre-assembled we have done. Simply pull your stock internals out, clean up the housing, swap out your seals, and install the new components. Easy as that! Then you just..
This is the most simple DIY kit on the market! We have taken all the guesswork on how to rebuild your 68RFE. Everything that can be pre-assembled we have done. Simply pull your stock internals out, clean up the housing, swap out your seals, and install the new components. Easy as that! Then you just..
All new for the 2007.5-2009 Dodge RAM! Control your transmission temperatures and tow with confidence with the latest improvement for your Dodge Ram from Fleece Performance. Engineered from the ground up to provide you with the most efficient and highest performing replacement transmission coo..
Fits: 2007.5-2018 Dodge 6.7L CumminsUpgrade the transmission in your 2007.5-2018 Dodge 6.7L Cummins with the Sun Coast Billet Piston. This billet piston upgrade is a must have item when building your performance transmission. Sun Coast: 68-2CP..
Fits: 2007.5-2018 6.7L Cummins 68RFEThe ATS 68RFE/545RFE Line Pressure Test Adapter is a must have when building or diagnosing the transmission on your 2007.5-2018 Dodge 6.7L Cummins 68RFE. This tool allows you to verify scan tool readings by testing the line pressure in your Cummins. ATS:..
Fits: 2007.5-2018 Dodge 6.7L CumminsATS 68RFE Accumulator Piston kit with seals, 2007.5-2018 6.7L Cummins. Anodized violet. Includes 5 Pistons. ATS Diesel Performance was founded in 1993 and has been serving businesses, hobbyists and racing enthusiasts ever since. Located in Arvada, Colorado, ATS in..
Fits: 2007.5-2018 6.7L CumminsHeat in the 68RFE transmission causes the stock thin cast channel plate to warp, causing cross leaks and poor shift performance. To combat this common issue, ATS designed a BilletProof Channel Plate: A stress relieved 1" thick aluminum tooling plate precisely CNC machin..
Fits: 2007.5-2018 Dodge 6.7L Cummins( Equipped with 68RFE)24% improvement in hydraulic clamping force over factory drumIncreased friction elements in overdriveQuad-ring design of inner drum o'ring maintains compression during high rpm'sConsistent factory like CVI'sNew lip seal style for outer s..
Fits: 2007.5-2018 Dodge 6.7L Cummins(Equipped With 68RFE Transmission)The Sun Coast Billet 4C Snap Ring Retainer is a massive upgrade from the stock 4C snap ring retainer in the 68RFE transmission in your 2007.5-2018 Dodge 6.7L Cummins. The factory 4C snap ring in the 68RFE is notorious for blo..
Babymaker 1000 Valve Body for 07.5-18 68RFE
Valve Body, Deep Pan, Gasket, Filters, And Billet Filter Adaptor.
To unlock the full potential of the Babymaker, it requires trans tuning.
If you do not have tuning, this will, at minimum eliminate cross leaks.
The valve body is..
ATS 68RFE Reinforced Overdrive Clutch HubFitment: 2007½-2022 Dodge RAM 6.7L CumminsBuild your 68RFE like a pro with the ATS Reinforced Overdrive Clutch Hub for the ultimate in transmission strength. Our overdrive clutch hub features increased stability, protection against crack formation a..
The XDP 68RFE Billet Filter Clamp XD478 will help protect the 68RFE transmission in your 2007.5-2018 Dodge Ram 6.7L Cummins. When installing a deep dan onto the transmission in your truck the filter can become dislodged.
If the filter comes out of place, this will starve the transmission of fluid..
We are proud to present the strongest and only true billet forged overdrive clutch hub for the 68RFE. Our shaft fits ALL 68RFE’s both stock and aftermarket from 2008-2019! Unlike the competition who start with an OEM shaft, cryogenically treat, shot peen and tap it with a magic wand; our shaft is tr..
Fits: 2007.5-2021 Dodge Ram 6.7L Cummins 68RFE
Patented direct oiling circuit directs cooler flow directly at the OD clutch.
Keeps the OD clutches bathed in cooled lube oil and substantially decreases the tendency of clutch coning
Radiused between the sealing rings to relieve stress
Gun ..
ATS BilletProof 68RFE Billet Pump Plate (plate only)Fitment: 2007½-current Dodge Ram 6.7L Cummins The heart of the 68-RFE transmission is the pump, installing the ATS BilletProof 68- RFE Billet Pump Housing is one of the key elements to having a reliable 68-RFE transmission. This part come..
After nearly a decade Revmax has finally released a DROP IN, NO MACHINING REQUIRED 700 Series input clutch drum. This drum is ONLY meant to be installed by a professional installer. The drum kit does NOT come with clutches or steels and these must be purchased separately or you will need to purchase..
Fits: 2007.5-2022 Dodge 6.7L Diesel (Equipped With 68RFE)Order this BD-Power 1062036 Big Stack Overdrive Shaft & Drum Kit for your 2007.5-2022 Dodge 6.7L Diesel which will increase the torque holding capacity. BD's large overdrive clutch spline and high strength billet QT1000 reaction plates ens..
This billet steel adapter replaces the brittle plastic piece used to mount your spin on filter to your 68RFE Transmission.FEATURESBillet steel adapter for 68RFE spin-on filterReplaces the brittle plastic adapterWARRANTYParts12-MonthsEMISSIONSThis product does not require an EO in California. By natu..
ATS created this 68RFE transmission case brace to eliminates cracking that can happen when hauling large loads, towing heavy, and working your Dodge 6.7L Cummins to its full potential. This brace is a creative way to stop the weak transmission casting for flexing, potentially causing a fatal crack t..
Filter Coupler, Billet Aluminum (replaces factory plastic coupler to allow installer to properly tighten the filter) Must use 1/2" Hex Head to installATS: 3010212326..
Mishimoto’s transmission cooler is designed to be a direct fit for the 2010-2012 Dodge 2500/3500 6.7L Cummins and features a tube and fin design optimal for heavy load towing and rapid load changes. This transmission cooler boasts a 60% increase in core volume and an 86% increase in external f..
Upgrade your 2010-2012 Dodge Ram 2500/3500 6.7L Cummins with the Mishimoto Transmission Cooler Bypass Kit. Designed for a direct fit, this kit bypasses the stock intercooler and A/C condenser, making installation hassle-free. You don't need to worry about dealing with freon or vacuum lines, so you c..
Fits: 2010-2012 Dodge 6.7L Cummins
The 2010-2012 68rfe equipped Ram trucks have always been known to run hotter than then their early predecessors. There also have been numerous melted down transmissions due to the bypass valve sticking in the cold closed position. Lastly, the thermal bypas..
Fits: 2011-2018 Dodge 6.7L Cummins (Equipped With 68RFE Transmission)
Grey solenoids packs came on all the 2011-2018 68RFE transmissions & will only fit these specific year models.
The Valve Body:
The valve body is like the brain of the transmission. It is the single most important..
Fits: 2012-2018 Dodge 6.7L CumminsThe ATS 68-RFE valve body is the brain of the transmission and is responsible for porting all of the hydraulic pressure to the clutch packs of the transmission. There is nothing more important than having a properly calibrated valve body in your transmission. It doe..
Fits: 2012-2018 Dodge 6.7L Cummins
The ATS Billet Channel Plate Kit is engineered to get the most performance out of the transmission your 2012-2018 Dodge 6.7L Cummins. This channel plate kit comes with the ATS Billet Channel Plate, ATS Accumulator Plate, ATS Billet Accumulator Piston Kit a..
ATS 68RFE Performance Valve Body Assembly w/ Solenoid Pack (gray electrical connector)Fitment: 2012-2018 Dodge Ram 6.7L CumminsThe valve body is considered the nervous system of the transmission; the valve body is responsible for converting the electrical signals from the TCM into hydraulic actions...
ATS 68RFE Separator Plate and Accumulator Plate KitFitment: 2012-2018 RAM 6.7L CumminsIncludes:ATS Separator Plate and GasketsATS Accumulator PlateFor use in ATS built 68RFE Billet Transmissions and/or with the ATS 24 Pin Co-Pilot®.ATS: 3030312380..
OE cooler bypass valves allow transmission fluid to bypass the cooler and flow right back into the transmission, quickly raising the transmission temperature. These OE cooler bypass valves tend to fail, causing the transmission and torque converter to overheat and cause major damage. Our Full Flow C..
Fits: 2013-2018 Dodge 6.7L CumminsDebris in the stock cooler bypass valve can cause it to jam the internal valve keeping it in recirculation mode. When this happens the transmission temperature will rise and can lead to overheating and premature transmission failure. The BD Cooler Bypass Delete keep..
Backordered with No ETA **Updated on 11/13/2024**
Fits: 6.7 Cummins 2013-2018 (With 48RE Transmission Swap)
The Full Send Diesel Bypass Transmission Line Kit is the perfect solution for your 6.7 Cummins. No more hose clamps needed with this billet -AN fittings and durable braided ..