-80x80.jpg)
89-07 Ram 5.9L Cummins Goerend Billet Flex Plate 47/48RE SFI Approved
$374.00
- Part Number: GFP-5.9 SFI
- Est. Ship Time: Usually Ships In 1-3 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $89.00
Starting From $1,545.00
Starting From $89.00
Starting From $99.00
Ford Cummins Conversion Flex PlateFlex Plate, Billet, Cummins 5.9L Engine to Ford E4OD & 4R-100 Transmission Billet Conversion Flex plates that will ..
$888.13
Goerend Billet Flex Plate - (Non SFI Approved) 47RE, 48RE, 47RH 5.9L
As the horsepower and pulling weight of the vehicle increases, so does t..
$349.00
Goerend Billet Flex Plate - 68RFE
The Goerend 68RFE Billet Steel Flexplate utilizes forged steel construction and replaces the stamped factory piec..
$349.00
This Goerend Transmission SFI APPROVED billet flex plate replaces the stamped factory piece that is prone to failure when under high power levels. As ..
$374.00
Billet Output Shaft For Dodge 47RE & 48RE Transmission
Install Billet Shafts in your new transmission build for the extreme in reliability. The bille..
$750.00
Sonnax Input Shaft For Dodge 47RE or 48RE Transmission
Install Billet Shafts in your new transmission build for the extreme in reliability.
Son..
$899.00
Dodge Cummins 5.9L/6.7L 12V/24V, 8 pieces Flexplate Bolt Kit
These are for a automatic flexplate will not work for manual flywheel.
ARP: 147-2901
..
$60.81
Includes thermostat only, with seal ring.
Image for reference only.
Cummins part number: 5292742..
$65.11
Factory replacement Thermostat Housing Seal
Fits all 2003 to 2018 5.9L & 6.7L Cummins.
Cummins part number: 3954829..
$8.30
Valve Body Electronics Upgrade
More rugged, reliable transducer
HD Borg Warner governor solenoid
Handle higher pressures
Prevents wild oscilatio..
$276.95
Ultra-Torque Assembly Lube1.69oz tube.
Gets you within 5% of the required pre-load on the first pull and stays consistent with each subsequent cycle-..
$7.35
The ATS Billet input shaft is the back bone of your Dodge Cummins transmission. It is the first hard part to bring power into the transmission and tra..
$808.00
The Goerend 47RE GT2 master rebuild kit includes all the parts needed to update and rebuild a working transmission. This kit includes a complete overd..
$964.00
Dodge 727 Single Disk Cummins Torque Converter by Goerend Transmission
Works in 1989-1993 Dodge 727 or 518 Automatic Transmissions.
Goerend Conver..
$650.00
Snap On 89-07 Dodge 5.9L Cummins Engine Barring Tool
Used to rotate the engine for making valve and injection pump adjustments on Cummins and J.I. Ca..
$159.95
Includes rear main crank seal and rear main seal housing gasket.
May Require The Use Of Installation Tool GS33491,
Gasket Included: Yes
Seal ..
$51.91
GS33491For Use On Rear Gear Train EnginesRepair Sleeve Tool..
$6.80
12 & 24V VALVE FREEZE PLUG BACK PLATE
This freeze plug plate is available in 2 varieties:Stock plug retainer- When installed properly, this plate wi..
$69.01
Set of eight(8) flex plate bolts for 1989 to 2018 5.9L & 6.7L Dodge Cummins with automatic transmission.
Cummins part number 3908522..
$67.49
OE cooler bypass valves allow transmission fluid to bypass the cooler and flow right back into the transmission, quickly raising the transmission temp..
$89.00
Goerend Difference:Designed and manufactured in-house from start to finishK-factor and torque ratio tested on in-house dynamometerBillet steel coverMa..
$1,545.00
OE cooler bypass valves allow transmission fluid to bypass the cooler and flow right back into the transmission, quickly raising the transmission temp..
$89.00
The Goerend Bellville spring is .020” thicker than stock for added strength. The late .780" apply piston is the only style apply piston that should be..
$99.00
Dodge trucks pulling heavy loads or boosted to 500–600HP are at high risk for overdrive burnup due to the stock transmission’s insufficient clutch cap..
$699.00
Fits: 1994-2007 Dodge Cummins 5.9L
The 23-spline billet input shaft is custom forged from High Strength 300M steel and incorporates a 23-tooth inpu..
$649.00
The Goerend C2 clutch hub is more durable than OE hubs. It is made out of forged 4140 high strength steel and has a thicker snout to prevent twisting ..
$449.00
OE P2 planetary carriers in are known to get stripped easily. Stripping can cause complete transmission failure. The Goerend P2 planetary carrier snou..
$755.00
OE P2 planetary carriers in are known to get stripped easily. Stripping can cause complete transmission failure. The Goerend P2 planetary carrier snou..
$755.00
Goerend Difference:Designed and manufactured in-house from start to finishBillet steel coverMade from steel forgings to reduce porosityBillet steel pi..
$2,200.00
Some of the first steps of designing new products is by identifying the weak points and problem areas of the existing parts and figuring out how to im..
$1,395.00
The 23-spline billet input shaft is custom forged from High Strength 300 maraging steel and incorporates a 23-tooth input spline and 62-tooth clutch s..
$749.00
Designed by Dave Goerend and staff, who have been researching and developing to make their own pan to fit their needs and are now sharing these result..
$299.00
Goerend Difference:Designed and manufactured in-house from start to finishK-factor and torque ratio tested on in-house dynamometerBillet steel coverMa..
$1,095.00
Call to Order! Pricing May Change Based On Your Specifications!
3-4 Week Build Time! Call to Confirm!
03-07 Dodge 5.9L Cummins Diesel V..
$0.00
Notice: A 10% cancellation fee will be charged for canceled orders.Full Manual Valve Body for 03-07 5.9 Cummins with 48REThe same Valve Body used in '..
$825.00
This G56 transmission case features an updated design that is thicker and reinforced in critical areas. It is intended to back popular 5.9L- and 6.7L ..
$2,336.25
Backordered
Backordered with No ETA (Updated on 1/21/2025)
Replacement case for the G56 6 Speed Manual transmission. This is an aftermarket replace..
$1,811.55
G56-OR-HD 13" Full HD Performance Organic clutch Rep Set w/o flywheel425 hp 900 trq 20k towing capacity.Does not work on factory flywheel.Upgraded Hyd..
$679.34
G56-OFER ---- 13" half Organic half Feramic clutch kit w/o flywheel 475 hp 1000 trq 25k towing capacity Not recommended for stock applications. Does n..
$849.18
Many years back we (circa 2014) RevMax began using billet valve bodies in their 68RFE 1000 series transmissions. These units featured on demand lockup..
$425.00
Are you tired of your 68rfe not holding power? Do you hate the 20 times it shifts and locks and unlocks while trying to get up to 55mph? Looking to ge..
$2,290.79
Notice: A 10% cancellation fee will be charged for canceled orders.Full Manual Valve Body for 94-02 Cummins with 47REThe same Valve Body used in 'Red ..
$825.00
Notice: A 10% cancellation fee will be charged for canceled orders.XHD Extreme Heavy Duty Quad Disc Converter for 47RE Transmissions.Aggressive Lockup..
$1,550.00
The Firepunk FPC1 Competition Stage 1 Transmission for your 00-02 Dodge 5.9L Cummins is the perfect option for the serious performance enthu..
Starting From $6,700.00
The Firepunk FPC2 Competition Stage 2 Transmission for your 00-02 Dodge 5.9L Cummins is a full billet build. This is a 1000HP capable transm..
Starting From $7,850.00
The Firepunk FPC3 Competition Stage 3 Transmission for your 00-02 Dodge 5.9L Cummins is for the ultimate street truck making big power. Suit..
Starting From $9,450.00
The Firepunk FPST Street & Track Transmission for your 00-02 Dodge 5.9L Cummins is perfect transmission package for those who use their ..
Starting From $5,750.00
The Firepunk FPTMP Towmaster Plus Transmission for your 00-02 Dodge 5.9L Cummins is designed for the diesel owner who enjoys the added horse..
Starting From $4,350.00
1947-O-HD ---- 13" Full Organic clutch kit w/o flywheel 425 hp 900 trq 20k towing capacity.Works on factory flywheel.Stage: 2Use: HD-OFt-Lbs: 425hp, 9..
$679.34