2019+ Ram 6.7L Cummins Randys 68RFE Babymaker 2000 Kit

Notice: A 10% cancellation fee will be charged for canceled orders.

Billet Channel Plate With Valve Body, Filters, Deep Pan, Gasket and Billet Filter Adapter. 

For 19+ 68RFE Transmissions

FOR 2019 AND UP 68RFE TRANSMISSIONS

The valve body is flat sanded to our tolerances. We install HD billet accumulators proven to prevent bore wear and

provides unsurpassed sealing qualities. Sonnax accumulator plate cover with 3 additional bolts

eliminating plate blowout. SSV is reamed out and Transgo switch valves are installed to correct wear and leaks. All valve body bores are vacuum tested to insure hydraulic integrity. HD billet channel plate is installed onto the valve body and torqued to our specifications preventing cross leaks which results in premature transmission failure.

Includes new O.E solenoid block. This valve body does not include the TCC solenoid, you must use your original or a new one. 

Comes With:

Valve Body, Deep Pan, Gasket, Filters, And Billet Filter Adaptor.

THIS IS THE INFORMATION YOUR TUNER WILL NEED TO PROPERLY TUNE FOR THE BABYMAKER:

• LINE PRESSURE SET TO 225PSI ABOVE 30% THROTTLE ANGLE
• 100PSI RESTING PRESSURE
• NO LOCKUP UNTIL 4TH GEAR
• LOW/REVERSE SPRAG HOLDOUT
• FOR 2019+, UNDERDRIVE PULSE TEST MUST BE TURNED OFF.

Randys: BM2000KIT