19+ Ram 6.7L Cummins Randys 68RFE Babymaker 2000 Valve Body

The valve body every man...or woman needs.

This fits the stock/OEM pan. 

To unlock the full potential of the Babymaker, it requires trans tuning. 

If you do not have tuning, this will, at minimum eliminate cross leaks.

FOR 2019 AND UP 68RFE TRANSMISSIONS

The valve body is flat sanded to our tolerances. We install HD billet accumulators proven to prevent bore wear and provides unsurpassed sealing qualities. Sonnax accumulator plate cover with 3 additional bolts eliminating plate blowout. SSV is reamed out and Transgo switch valves are installed to correct wear and leaks. All valve body bores are vacuum tested to insure hydraulic integrity. HD billet channel plate is installed onto the valve body and torqued to our specifications preventing cross leaks which results in premature transmission failure. Includes new O.E solenoid block.

2019+ 68RFE ONLY

To unlock the full potential of the Babymaker, it requires trans tuning. 

If you do not have tuning, this will, at minimum eliminate cross leaks.

THIS WILL NOT FIX A TRANSMISSION WITH RATIO CODES. IF YOU'RE EXPERIENCING THIS ISSUE, THE TRANSMISSION IS HURT. 

Includes new O.E solenoid block.

Comes With:

Valve Body

THIS IS THE INFORMATION YOUR TUNER WILL NEED TO PROPERLY TUNE FOR THE BABYMAKER:

• LINE PRESSURE SET TO 225PSI ABOVE 30% THROTTLE ANGLE
• 100PSI RESTING PRESSURE
• NO LOCKUP UNTIL 4TH GEAR
• LOW/REVERSE SPRAG HOLDOUT
• FOR 2019+, UNDERDRIVE PULSE TEST MUST BE TURNED OFF.

Includes core return label for customers in the lower 48 states. Price includes ground shipping to the lower 48 states. 

Randys: BM2000