Application: 2003-2013 Dodge RAM 2500 (4WD), 2003 - 2019 Dodge RAM 3500 (4WD), 2007-2019 Dodge RAM 3500 Chassis Cab (2WD/4WD), 2006 - 2008 Dodge RAM MEGA CAB 1500/2500 (4WD) & 2006 - 2019 Dodge RAM MEGA CAB 3500 (4WD)
Part number: HP10002
This kit adds approx. 5000LBS of LOAD LEVELING FORCE!
This kit mounts INSIDE the frame rails.
AMP - Heavy Duty Rear Air Spring Kit for Dodge RAM / 2500 / 3500 trucks
Have you ever noticed a difference in ride control when driving empty vs. driving fully loaded? Your truck's factory suspension was designed as a compromise between capability and comfort. When hauling heavy loads, the rear springs can be pushed to the limit - resulting in excessive bounce, sagging ride height, and an overall feeling of instability. With the simple addition of an AMP Air Spring Kit by Pacbrake, you can distribute weight evenly to your tires, supporting any load without overtaxing your existing system.
AMP Heavy Duty Double Convoluted Air Spring Kits are the only air springs (or air helper springs) on the market with one piece aluminium end caps and 20 support wires giving you maximum strength and durability!
Each AMP Double Convoluted Air Spring Kit is equipped with corrosion resistant roll plates, precision laser cut powder coated steel brackets, grade 5 plated hardware, airline and all accessories required for the perfect bolt on install.
AMP Air Springs by Pacbrake come with a Lifetime Warranty. Please refer to the warranty document for more details.
With AMP you can level your truck's stance and eliminate your vehicle's sag, sway and bottoming out while providing added support for an overall smooth and safe ride.
Pacbrake Air Springs are designed and manufactured to be the #1 air suspension choice among consumers.
- 2 Ply Rubber
- CNC Machined Anodized Aluminum End Caps
- Air Adjustable from 5 to 100 PSI
- Max Air Pressure: 180 PSI, working load
- Max Load Pressure at 100 PSI: 2585 lbs (lrg double convoluted)
- Max Load Pressure at 100 PSI: 2270 lbs (double convoluted)
- Max Load Pressure at 100 PSI: 2220 lbs (single convoluted)
- Grade 5 Hardware, Plated
BRACKETS (not included in Fabricator's Air Suspension Kits)
- Precision, Laser Cut
- Powder Coated
- D.O.T. Approved
- Quick Connect Fittings
- Plated for Corrosion Resistance
Notes: The HP10002 Kits fit with the 3349 and 3319 superglide 5th wheel rail kits on 4WD vehicles. For 2007 - 2019 Dodge RAM 3500 (2WD/4WD) Chassis Cab, the HP10136 must be purchased for vehicles that have a round axle tube with the breather located approximately 7'' from the spring pack.
If you have a round axle with a Cab & Chassis 3500, and your axle breather is 7 inches from the spring pack, you will need the breather relocation kit, part number HP10136.