94-07 Dodge 5.9L Cummins PDD SFI 47 48RE HD Flexplate
$170.00
- Part Number: 20166484000
- Est. Ship Time: Usually Ships In 2-3 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
Heavy Duty SFI 29.1 rated flexplate for Dodge Cummins 47/48RE automatic transmissions. An upgraded flexplate is recommended for all trucks making 500HP or more as the stock-stamped steel flexplate commonly breaks around 500HP. These heavy duty flexplates have been tested and proven reliable to over 1000 HP & 2000 LB-FT of Torque.
Features:
- Compatible with: 1994-2007 Dodge Ram 5.9L equipped with 47/48RE Automatic Transmissions.
- Heavy Duty 29.1 rated Flexplate.
- Tested to well over 1000hp and 2000ft/lbs of torque.
- Installation note: Check for run-out with a dial indicator, we recommend no more than .012″ of total run-out!
PDD: 20166484000
Interstate Mcbee 12 Valve Cummins Stock Tappet, Set of 12
McBee part number: M-3931623..
$84.24
Sick of snapping off the cheap plastic OE oil squirters?
Try these heavy duty BILLET oil squirters from Contagious diesel.
Guaranteed to a..
$50.00
Fits 1989 to 2002 5.9L Cummins engine block. Billet side freeze plug features recess for bolt head, includes o-ring freeze plug seal and copper sealin..
$34.95
Fits 1989 to 2002 12 & 24 Valve 5.9L Cummins engine block. Billet rear freeze plug features 1/2″ npt threaded center hole with plug (can be ..
$54.95
Critical Fitment Warning - Machined Cap Rods Only
The CB-1413P fits 1989-2002 5.9L Cummins engines with machined cap (non-fractured) connecting rods ..
$11.80
Goerend Billet Flex Plate - (Non SFI Approved) 47RE, 48RE, 47RH 5.9L
As the horsepower and pulling weight of the vehicle increases, so does t..
$374.00
The 23-spline billet input shaft is custom forged from High Strength 300 maraging steel and incorporates a 23-tooth input spline and 62-tooth clutch s..
$799.00
Fits 89-93 Dodge 5.9L Cummins Diesel Trucks
This fuel filter stud is used to delete fuel heater on 1st gen Cummins (89-93)
Part number: J925954
..
$23.99
Rebuilding your engine? We recommend replacing this plug any time you have your engine out. It installs behind the engine adapter plate over the back ..
$11.10
Fits: 2003-2009 Dodge 5.9L/6.7L Cummins
Looking to upgrade your transmission cooling system on your 2003-2009 Dodge Cummins? FS..
$549.99
Power Driven Diesel 3K / 4K Governor Spring Kit for 1994-1998 5.9L 12 Valve Cummins (Bosch P7100 Pump)
Overview: The Power Driven Diesel 3K / 4K Go..
$170.00
The Cummins 3928499 is the genuine OEM 180 degree thermostat for 1994-1998 Dodge Ram 5.9L 12 Valve Cummins trucks, and this listing ships it as a comp..
$129.74
The PDP12Vvcbkit is the Pure Diesel Power Dual Valve Cover Crankcase Breather Kit for the 1989-1998 5.9L 12-valve Cummins and 4BT. It vents from the h..
$269.00
This is a freeze/expansion plug kit for the 4/6B Cummins engine block. This kit also includes the cylinder head/block alignment dowels as pictured.
..
$18.24
The Power Driven 22001211005 is a 48RE Transmission Cooler Line Replacement Kit for 2003-2007 Dodge 5.9L 24V Cummins trucks - a complete hose-and-fitt..
$250.00
Now available in convenient kits, you can replace deteriorated or damaged factory boots with ease! This kit Early 3rd Gen Dodge Cummins 2003-2007 truc..
$240.00
California and Colorado - Not Legal for Sale or Use:
This turbocharger is not legal for sale or use in California or Colorado due to emissions regula..
$1,370.00
Now available in convenient kits, you can replace deteriorated or damaged factory boots with ease! This 03-07 Ford intercooler boots kit fits 6.0L Pow..
$240.00
Shipping Restriction
This cylinder head set cannot ship to California or Colorado addresses. A valid alternate delivery address outside California or..
$2,780.00
Shipping Restriction
This cylinder head set cannot ship to California or Colorado addresses. A valid alternate delivery address outside California or..
$3,260.00
Sold Individually - Please Read Before Ordering
This listing includes one assembled cylinder head. Order quantity two when replacing both cylinder he..
$1,120.00
If you’re looking to enhance the performance and reliability of your 6.0L or 6.4L Ford Powerstroke engine, Power Driven Diesel has the solution ..
$410.00
The Power Driven Diesel Stage 1 Towing Performance CNC Ported Cylinder Head is an upgraded 24 valve common rail cylinder head for 2003-2018 Dodge Ram ..
$2,910.00
The Power Driven Diesel Stage 2 Hot Street CNC Ported Cylinder Head is an upgraded 24 valve common rail cylinder head for 2003-2007 Dodge Ram 5.9L Cum..
$3,610.00
The Power Driven Diesel Factory HE351 Cast Compressor Wheel 60mm Pre Balance is a high-quality upgrade for your turbocharger. This compressor wheel ut..
$50.00
The Power Driven Diesel 22001211006 is a 68RFE Transmission Cooler Line Replacement Kit for 2007.5-2009 Dodge 6.7L Cummins trucks - a complete hose-an..
$250.00
Shop the best performance diesel intercooler boots for your truck. These are the best boots for charge air piping and hold over 100lbs of boost. Now a..
$240.00
Heavy Duty SFI 29.1 rated flexplate for Dodge 68RFE automatic transmissions. An upgraded flexplate is recommended for all trucks making 500HP or more ..
$210.00
Refundable $500 Core Fee - Factory Valve Body
The kit price includes a $500 core fee, refunded when your factory valve body is returned after install..
$2,500.00
Fits: 2007-2018 Dodge 6.7L Cummins 8 Bolt Crank, 2019-2020 Dodge 6.7L Cummins 10 Bolt Crank
RevMax billet steel flexplate. A must upgrade for any t..
$450.00
Midwest Truck Parts Big Iron SFI approved flex plate for 07.5-12 Dodge 6.7L Cummins
MTP: BFP071267..
$174.00
DPC 68RFE billet flex plate features a 29.4 SFI rating. Billet flex plates are recommended on performance builds and competition built vehicles. ..
$375.25
Heavy Duty SFI 29.1 rated flexplate for Dodge 68RFE automatic transmissions. An upgraded flexplate is recommended for all trucks making 500HP or more ..
$210.00
The Ideal Companion to a Performance Transmission and Torque Converter!Designed to work on 2007.5-2018 Dodge 6.7L Cummins diesels equipped with the 68..
$459.95
DPC 68RFE heavy duty flex plate features stamped steel construction and is twice as thick as the stock flex plate. Flex plate is 29.1 SFI approved and..
$178.55
Midwest Truck Parts Big Iron SFI approved flex plate for 13-18 Dodge 6.7L Cummins
MTP: BFP131867..
$194.00
Fits: 2019-2020 Dodge 6.7L Cummins
ATS billet flex plates are SFI approved, meaning that they stand up to the toughest race application standards. ..
$459.99
Midwest Truck Parts Big Iron SFI approved flex plate for 94-07 Dodge 5.9L Cummins
Old Part MTP: BFP59
New part MTP: BIHDFP59C..
$174.00
Billet (12 bolt) SFI 29.3 rated flexplate for Dodge 47RH, 47RE and 48RE automatic transmissions.
This 12 bolt billet flexplate is compatible with b..
$425.00
BD's NEW Black FleX-Plate If you race your truck, or compete in pulling competitions, you're probably all too familiar with the phrase, "A drivetrain ..
$459.95
DPC 47/48 Billet Flex Plate29.1 SFI Rated12 Bolt Billet Flex PlateInstallation Instructions Click HereDPC: 48DBFP..
$375.25
DPC heavy duty stamped 47RH/ 47RE/ 48RE flex plate is designed for 94-07 5.9L Cummins. Flex plate is double the thickness of the stock flex plate and ..
$178.55
Valair billet flex plate for the 68RFE found behind the 6.7L Cummins
SFI Approved
Part number: FP-68-B...
$282.00
1989-2009 Dodge Ram Cummins Mopar A518, 47RE, or 48RE transmission torque converter bolt.Overall length is .7565
Price is PER bolt. 6 bolts are neede..
$16.77
