Menu
Your Cart

Water to Air Intercooler type 54, Supports 3000HP at 170PSI

Water to Air Intercooler type 54, Supports 3000HP at 170PSI
Water to Air Intercooler type 54, Supports 3000HP at 170PSI
Water to Air Intercooler type 54, Supports 3000HP at 170PSI
Water to Air Intercooler type 54, Supports 3000HP at 170PSI
Water to Air Intercooler type 54, Supports 3000HP at 170PSI
  • Part Number: INT000949
$999.00

This Liquid/Air intercooler is built for massive boost. Special innovations in the core and end tanks allow it to operate at continuous pressure of over 150 PSI.

Each of these intercoolers is pressure tested to hold 170 PSI for 30 minutes at the end of production. The trade off is that a slightly thicker metal is used in the intercooler, reducing efficiency.

The proportions are somewhat ridiculous, please make sure it will fit before ordering. If you have the room, there's nothing better.

The height, its smallest dimension, is twelve inches. This intercooler is more than thirteen times larger than our smallest core. Recommended for up to three thousand horsepower.

100% Lightweight aluminum, No Epoxy Used In Core

Fin pitch is 17 fins/inch - 8.5 air side and 8.5 water side.

Recommended for up to 3800 CFM / 3000 HP

Pressure Drop: Less than .8 PSI. This is not a typo! Liquid/Air Intercoolers have incredibly low pressure drop.

Inlet: 4.5" Outlet: 4.5"

Maximum water/air pressure: 150 PSI

Core Size: 12"x12"x10" (Endtanks add to length)

150 PSI Water to Air Intercooler The inlet and outlet on this intercooler are on the same side.

 

Note: The water inlet and outlet on most water/air intercoolers are BPT threads. BPT fittings are difficult to find in the United States, so ours all come with NPT threads.

 

 

Part Number: INT000949

Write a review

Please login or register to review
Tags: Water , to , Air , Intercooler , type , 54 , Supports , 3000 , HP , at , 170 , PSI , Part , Number , INT000949