Water to Air Intercooler, 17"x12.25"x9", Thru I/O (Type 55)
This is an enormous water to air intercooler. Special innovations in the core and end tanks allow it to operate at continuous pressure of up to 150 PSI. The proportions are somewhat ridiculous, please make sure it will fit before ordering. If you have the room, there's nothing better. The height, its smallest dimension, is nine inches. This intercooler is more than five times larger than our smallest core. Recommended for up to two thousand horsepower. Each of these intercoolers is pressure tested to hold 170 PSI for 30 minutes at the end of production. The trade off is that a slightly thicker metal is used in the intercooler, reducing efficiency.
100% Lightweight aluminum, No Epoxy Used In Core
- Recommended for up to 2500 CFM / 2000 HP
- Pressure Drop: Less than 0.5 PSI. This is not a typo! Liquid/Air Intercoolers have incredibly low pressure drop.
- Air Inlet/Outlet: 4"
- Water Inlet/Outlet: 3/4" NPT
- Maximum water/air pressure: 150 PSI
- Core Size: 9.5"x9"x9" (Endtanks add to length)
The inlet and outlet on this intercooler go directly through the intercooler; preventing the air from changing direction can result in better airflow.
Note: The water inlet and outlet on most water/air intercoolers are BPT threads. BPT fittings are difficult to find in the United States, so ours all come with NPT threads.
Some Water to Air Intercoolers that you can buy online do not contain true water to air cores. A true water to air core has water passages that are much smaller than the air passages. This is part of what allows the water to air intercooler to be so small and have such low pressure drop. Some water to air intercoolers that you buy online use an air to air core design where the air passages for ambient air and intake air are the same size, with an enormous loss of efficiency. Buy from us to make sure that you get a genuine water to air intercooler core!
10% Restocking Fee Applies to ALL returned Air-Water Intercoolers.