-80x80.jpg)
THD 89-91 Cummins Non Intercooled Performance 3" Cross Over Pipe
$229.99
- Part Number: NI3COP
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $279.99
Starting From $2,150.00
Starting From $0.00
PDP Pick
1st gen intake kit. Kit utilizes the BHAF air filter, and smooth 4" exhaust tubing. Allow your 1st gen Cummins to breathe!
Only fits turb..
$279.99
89-93 Dodge 1st Gen 5.9L Cummins DieselKiller Dowel Pin Repair Kit (KDP)
Includes:
Crank Seal
Dowel Pin Tab
TUBE OF RTV
*This pin is designed..
$79.00
T6 Turbo Flange Gasket, Divided.
Fits most HT3B turbos as well...
$12.00
Made from 4140 and max hardened. This pin is properly cut, so to give maximum fueling, but not cut too deep to allow slide pin to slip past the O ring..
$105.00
Hot
This 3200 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3200 rpm..
$19.30
-10 %
Dodge 89-93 First Gen Injector Set: Stage 2 approximately 75-100 HP improvement over stock. With proper supporting modifications injectors will suppor..
$681.35 $757.05
Includes item #4 in second picture.
Turbo Oil drain tube gasket only.
Cummins: 5264569..
$5.44
This 3600 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3600 rpm..
$8.52
Ducky Fuel Injection 5X0.014" (140HP) SAC InjectorsClassic injectors are built on reman Bosch bodies.These injectors are roughly 140HP over stock depe..
$475.00
True high volume low pressure piston lift pump.
Unlike other low pressure piston lift pumps these have the larger diameter piston, which push..
$285.00
Description: 4 Ply Silicone Sleeve, 4" I.D. x 3" longMaterial: 4 Ply Reinforced SiliconeWarranty: One Year Limited Warranty Silicone..
$20.99
K4211A - 1989, 1990, 1991, 1992, 1993 - DODGE 5.9L CUMMINS DIESEL 2500/3500 (ALL CAB AND BED LENGTHS) - 4" ALUMINIZED - PERFORMANCE DIESEL EXHAUST KIT..
$515.91
Cummins OEM fuel heater seal for the 89-93 Dodge 5.9L Cummins Part Number: 3913695..
$11.15
Cummins oil filler cap.
Cap for valver cover. Cap only, does not include any other parts. (number 5 from second image only)
Cummins part number: 3..
$36.66
Specifically designed to fit the HX35W turbocharger found on OEM 96-98 DODGE RAM trucks with the 6BT 5.9 MANUAL 12V. The blanket efficiently covers t..
$120.00
Backordered
Backordered with No ETA (Updated 11/18/2024)
The Hungry Diesel "THD Injectors" 30HP over stock 6 hole 145 angle VCO for 89-93 Dodge Ram&n..
$450.00
PDP Pick
1st gen intake kit. Kit utilizes the BHAF air filter, and smooth 4" exhaust tubing. Allow your 1st gen Cummins to breathe!
Only fits turb..
$279.99
This pump can have a several month lead time. Contact us to confirm an estimated lead time before ordering.
The Hungry Diesel very own Competition..
$2,150.00
Due to longer than expected lead times, we no longer sell The Hungry Diesel injection pumps. Please order your pump directly at TheHungryDiesel.com
..
$0.00
These injectors are built on demand and may take 2-3 weeks or longer to ship.
This is a manufacturer estimate and we cannot guarantee an exact lead t..
$470.00
Made from 4140 and max hardened. This pin is properly cut, so to give maximum fueling, but not cut too deep to allow slide pin to slip past the O ring..
$105.00
True high volume low pressure piston lift pump.
Unlike other low pressure piston lift pumps these have the larger diameter piston, which push..
$285.00
1st gen 89-93 Braided AFC Line Upgrade. Replace that common to break afc line, with a braided line that will never break again.
NOTE - PICTURE IS OF ..
$50.00
The Hungry Diesel full 3" intercooler piping upgrade kit. Cooler egt and more throttle response, allow for a better overall running engine.
Par..
$340.00
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is inclu..
$950.00
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is includ..
$849.00
-10 %
-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS..
$285.40 $317.13
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.
All Pusher intake manifolds can be used with or witho..
$174.99
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$593.00
PDP Pick
WHAT IT DOES
Your Cummins engine consumes a massive amount of air and struggles to breathe through its tiny, squashe..
Starting From $968.00
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater an..
Starting From $968.00
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.
The Pusher 12v manifolds are hydro boost compatible and..
$184.99
-10 %
Arc-Flow Intake Manifold, Black Powdercoat, 98.5-02 Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Int..
$285.40 $317.13
Blade Runner (Charged Manifold) Dodge Trucks- 98.5-02 L6-5.9L (td) Features Increase airflow by 32.9% over stock ..
$475.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks. All Pusher intake manifolds can be used with..
$174.99
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$498.00
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$349.00
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$329.95
S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize ai..
$249.00