





91.5-93 Dodge Cummins THD 3" Intercooler Upgrade Kit
$340.00
- Part Number: 91.5-93upgrdkt
- Est. Ship Time: Usually Ships By Next Business Day

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Starting From $2,150.00
Starting From $229.99
The Hungry Diesel full 3" intercooler piping upgrade kit. Cooler egt and more throttle response, allow for a better overall running engine.
Part Number: 91.5-93upgrdkt

Tags:
THD
, 91.5
, 93
, Dodge
, Cummins
, 3
, Intercooler
, Upgrade
, Kit
, From
, The
, Hungry
, Diesel
, 91.5-93upgrdkt
Features: *Increased Fuel Economy *Lower EGTs *Mandrel Bent Tubing for Maximum Flow *Direct Fit *Increased Horsepower and Torque *Agressive Sound *Be..
$547.05
T3 Exhaust Manifold for 12 Valve Cummins 1989-98
DPS presents a game-changing T3 Manifold for your 12V Cummins Exhaust, covering the years 1989-199..
$429.00
Set of 6 Contagious Diesel 5x.014 injectors with micro blind SAC nozzles for the 1989-1993 Dodge 5.9L 12 Valve Cummins Turbo Diesel equipped with the ..
$0.00
Discontinued (Updated 2/30/2024)
AirDog® II-4G
The next generation in the fuel delivery system.
The AirDog 2-4G A6SABD340 Air/Fuel Separa..
$0.00
1st gen intake kit. Kit utilizes the BHAF air filter, and smooth 4" exhaust tubing. Allow your 1st gen Cummins to breathe!
Only fits turb..
$279.99
Installing a new exhaust manifold, or simply removing a stock or aftermarket manifold to change gaskets? If so, you'll find that it is a real hassle t..
$52.99
89-98 Dodge 5.9L 12 Valve Cummins Lift Pump Gasket
Cummins part number 3939258 lift pump to engine block gaskets. Includes #3 in the second picture o..
$6.73
Dodge 727 Single Disk Cummins Torque Converter by Goerend Transmission
Works in 1989-1993 Dodge 727 or 518 Automatic Transmissions.
Goerend Conver..
$650.00
Not running a mechanical lift pump anymore?
This plate will bolt right in place of your stock lift pump, blocking off the port.
Includes #2 in ..
$21.18
Made from 4140 and max hardened. This pin is properly cut, so to give maximum fueling, but not cut too deep to allow slide pin to slip past the O ring..
$105.00
This 3200 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3200 rpm..
$19.31
12-60lb Intake & Exhaust Valve Springs 89-98 12 Valve Dodge 5.9L Cummins
The seat pressure on these springs is ~150bs at the installed height o..
$275.76
12mm Head stud kit for the 89-98 Dodge 5.9L 12 Valve Cummins Turbo Diesel
Machining of the rocker pedestals is required for the installation of the..
$538.79
89-93 Dodge 1st Gen 5.9L Cummins DieselKiller Dowel Pin Repair Kit (KDP)
Includes:
Crank Seal
Dowel Pin Tab
TUBE OF RTV
*This pin is designed..
$79.00
Ducky Fuel Injection 5X0.014" (140HP) SAC InjectorsClassic injectors are built on reman Bosch bodies.These injectors are roughly 140HP over stock depe..
$500.00
Backordered with No ETA (Updated 6/12/2025)
The Hungry Diesel "THD Injectors" 30HP over stock 6 hole 145 angle VCO for 89-93 Dodge Ram&nb..
$450.00
1st gen intake kit. Kit utilizes the BHAF air filter, and smooth 4" exhaust tubing. Allow your 1st gen Cummins to breathe!
Only fits turb..
$279.99
This pump can have a several month lead time. Contact us to confirm an estimated lead time before ordering.
The Hungry Diesel very own Competition..
$2,150.00
THD Non Intercooled Cross Over. Help your engine breathe, and cool down your egts. Feedback has shown a 100 degree drop in peak egt temps as well as 3..
$229.99
These injectors are built on demand and may take 2-3 weeks or longer to ship.
This is a manufacturer estimate and we cannot guarantee an exact lead t..
$470.00
Made from 4140 and max hardened. This pin is properly cut, so to give maximum fueling, but not cut too deep to allow slide pin to slip past the O ring..
$105.00
True high volume low pressure piston lift pump.
Unlike other low pressure piston lift pumps these have the larger diameter piston, which push..
$285.00
1st gen 89-93 Braided AFC Line Upgrade. Replace that common to break afc line, with a braided line that will never break again.
NOTE - PICTURE IS OF ..
$50.00
Due to longer than expected lead times, we no longer sell The Hungry Diesel injection pumps. Please order your pump directly at TheHungryDiesel.com
..
$0.00
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is..
$950.00
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is ..
$849.00
-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS..
$317.13
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.
All Pusher intake manifolds can be used with or witho..
$174.99
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$593.00
WHAT IT DOES
Your Cummins engine consumes a massive amount of air and struggles to breathe through its tiny, squashe..
Starting From $968.00
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater an..
Starting From $968.00
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.
The Pusher 12v manifolds are hydro boost compatible and..
$184.99
Arc-Flow Intake Manifold, Black Powdercoat, 98.5-02 Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Int..
$317.13
Blade Runner (Charged Manifold) Dodge Trucks- 98.5-02 L6-5.9L (td) Features Increase airflow by 32.9% over stock ..
$475.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
All Pusher intake manifolds can be used ..
$174.99
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$498.00
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$349.00
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$339.95
S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize ai..
$249.00