
Crazy Carls DIY Intake Manifold Horn Parts
Available Options
$120.00
- Part Number: CC-DIYhornparts
- Est. Ship Time: Usually Ships In 1-2 Business Days

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Starting From $220.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
This is a parts kit for building your own custom air horn and includes all the basic parts needed: 304SS Base plate, 409SS U-bend, 4 long mounting bolts, 1/4 thick mild steel dipstick tab and 2 304SS bungs with 2 brass plugs.
*You will need to cut/weld this kit to fit your application.
Crazy Carl's part number: DIYhornparts

This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
This is a parts kit for building your own custom air horn ..
$120.00
This outlet elbow will fit on HX35 & HX40 and some S300 turbos that have a v-band compressor outlet flange.
One end clamps on with a v-band s..
$84.18
Passenger side 3" turbo to intercooler tube for Cummins 5.9L turbo diesel engines in 1991.5-1993 Dodge Ram pickup trucks.This tube is a perfect compli..
$119.99
K4211S - 1989, 1990, 1991, 1992, 1993 - DODGE 5.9L CUMMINS DIESEL 2500/3500 (ALL CAB AND BED LENGTHS) - 4" 409 STAINLESS STEEL - PERFORMANCE DIES..
$693.22
Cummins: 3069053
Clamp ONLY...
$49.66
94-07 Dodge 5.9L Cummins Stock Exhaust Manifold Turbo Studs & Nuts (4 nuts, 4 studs)
Part numbers:
3971421 - Discontinued, New Part Number: 51..
$104.11
Installing a new exhaust manifold, or simply removing a stock or aftermarket manifold to change gaskets? If so, you'll find that it is a real hassle t..
$52.99
Description
Cummins 03-18 5.9L/6.7L CR Freeze Plug Back Plate Plug.W/ Oring
**Install Note, PLEASE READ!**
This kit includes ..
$69.01
T3 Spacer Plate
1" thick, divided spacer. Machined from mild steel. Mounting holes are non-threaded.
Thread size is M10 x 1.5 when or..
$49.58
Aftermarket T3 Exhaust manifold with turbo flange centered, facing straighit up, or can be flipped to face straight down.
Requires use of long ..
$299.00
PLEASE READ THE PRODUCT DESCRIPTION HERE TO MAKE SURE THIS PART WILL WORK FOR YOU
All the gaskets needed to change ..
$45.69
The Alliant Intake Grid Heater Gasket pair for your 1989-2007 Dodge 5.9L Cummins is a direct replacement for your factory gasket. These are used at th..
$17.42
BD's VE pump Fuel Pin & Governor Spring gives your 1988-1993 Cummins 5.9L powered Dodge truck a new lease on life. Not only does it give you incre..
$202.95
Fits 89-93 Dodge 5.9L Cummins Diesel Trucks
This fuel filter stud is used to delete fuel heater on 1st gen Cummins (89-93)
Part number: J925954
..
$15.99
Introducing the Fleetguard LF9028:
It has a standard full flow oil filter, in addition to a bypass style (sub2-micron) filter in one housing. ..
$42.48
Set of 12 5.9L 12 Valve Dodge Cummins Valve Seals
These are NOT the updated later-year 12 Valve Top-Hat Style Seals.
Cummins: 3921640..
$109.43
This item normally ships out in 2-3 business days EVEN if you choose expedited shipping.
Both Black and Blue boots now available!
This i..
$220.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100% stain..
$206.80
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100 percent stainless stee..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, tubular steel or 304 stain..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Polished 304 Stainless Steel intake horn for all (94-07) D..
$234.00
Dual intake horn promotes max flow to the head at both ends.
For use only with our dual intake plate(Not Included)
Comes with dipstick mount and..
$339.00
Another Crazy Carl original product!
The Tunnel Ram is a patented intake for the Dodge Cummins diesel engine. It's unique design increases the airf..
$364.00
Another Crazy Carls original product!This barbed push-lock fitting allows the use of 1/2" fuel supply line to the P7100. It is a great way to get the ..
$25.00
Backordered with No ETA (Updated on 1/21/2025)
Another Crazy Carls original product!
The Tunnel Ram CR is a new patented i..
$364.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
For those who want the custom look, a dual plate allows tw..
$185.00
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
This is Crazy Carl's 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.F..
$35.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
One of the most complete kits available at t..
$1,710.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
Brackets, mount and linkage needed to use 24-Valve A..
$184.00
Another Crazy Carl's original product!Say goodbye to those old rusty shabby stock bolts!!Beautiful 304 Stainless Steel hardware kit for..
$29.00
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is..
$950.00
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is ..
$849.00
-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS..
$317.13
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.
All Pusher intake manifolds can be used with or witho..
$174.99
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$593.00
WHAT IT DOES
Your Cummins engine consumes a massive amount of air and struggles to breathe through its tiny, squashe..
Starting From $968.00
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater an..
Starting From $968.00
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.
The Pusher 12v manifolds are hydro boost compatible and..
$184.99
Arc-Flow Intake Manifold, Black Powdercoat, 98.5-02 Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Int..
$317.13
Blade Runner (Charged Manifold) Dodge Trucks- 98.5-02 L6-5.9L (td) Features Increase airflow by 32.9% over stock ..
$475.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
All Pusher intake manifolds can be used ..
$174.99
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$498.00
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$349.00
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$339.95
S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize ai..
$249.00