



94-98 Dodge 5.9L Cummins T-Rex Tech 3" Twin Intake Horn w/Plenum
Available Options
$0.00
- Part Number: TWNINTAKETUBE
- Est. Ship Time: Product Unavailable

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Starting From $0.00
Starting From $0.00
BACKORDERED NO ETA
94-98.5 Dodge Ram twin ram 3" mandrel formed tube
An additional 10-15 days will be added to the shipping timeframe when a Red finish is selected.
You HAVE to delete your grid heater when using this kit. It bolts directly to the intake plate without the spacer.
- 1/2" aluminum plenum runner plate
- plenum runner gasket
- 2 heater grid delete gaskets
- allen stainless steel stud & nut kit
- stocked in bright silver metallic
- Red is built to order and takes a few weeks
T-Rex Tech Part # TWNINTAKETUBE

Another Crazy Carl's original product!
The Tunnel Ram 24-P is our patented intake for the 98-02 Dodge Cummins 24V diesel engine WI..
$364.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Another Crazy Carls original product!
..
$364.00
Backordered with No ETA (Updated on 6/3/2025)
Another Crazy Carls original product!
The Tunnel Ram CR is a new patented in..
$364.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100% stain..
$206.80
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, tubular steel or 304 stain..
$184.00
BACKORDERED NO ETA94-98.5 Dodge Ram twin ram 3" mandrel formed tube
An additional 10-15 days will be added to the shipping timeframe when a Red fini..
$0.00
The Pusher Mega Twin manifold is the only twin ram style manifold on the market with a 3.5" inlet. This allows the Pusher manifold to be fed with..
$699.00
Discontinued (12/4/23)Diamond Eye I3218 - 1998.5, 1999, 2000, 2001 & 2002 DODGE 5.9L CUMMINS 2500/3500 (ALL CAB & BED LENGTHS) 3.5" PERFORMANC..
$0.00
Contact to Confirm Availability!
Diamond Eye I3218 - 1998.5, 1999, 2000, 2001 & 2002 DODGE 5.9L CUMMINS 2500/3500 (ALL CAB & BED LENGTHS) ..
$1,012.31
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
This v-band clamp to be used with Hx40 flange, part # VC400hX40
..
$40.63
Discontinued please see 23G40x for a potential replacement (Updated 2/21/2024)
Pure Diesel Power carries the complete line of cam plates ..
$0.00
Includes ONLY item #21 in second picture.
Cummins: 3933130..
$100.58
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street ve..
Starting From $67.35
VOLANT RECHARGER KIT: Air flow test have proven that cotton-gauze filters flow much more air than paper element filters do. However, when they get dir..
$42.90
Standard HX40/35 Rebuild kit comes with:
brass thrust bearing
brass main bearings
oil sheild
seal plate o-ring & piston ring..
$156.82
DISCONTINUEDPeak Intercooler Boot & Clamp Kit
Application: 94- 02 D..
$0.00
CUMMINS 14MM FUEL PRESSURE GAUGE SNUBBER
* SNUBBER ELIMINATES GAUGE NEEDLE BOUNCE
* USE ON ANY FUEL SYSTEM WITH A 14MM X 1.5 THREAD
..
$26.69
BILLET/TITANIUM VALVE SPRING RETAINERS & HARDENED KEEPERS
Dodge 1989-1998 5.9L 12 Valve Cummins
We highly recommend the use of titanium valve sp..
$0.00
Not running a mechanical lift pump anymore?
This plate will bolt right in place of your stock lift pump, blocking off the port.
Includes blocko..
$24.99
1994-1998 Fel-Pro Oil Pan gasket set Vin code C and D
Your Truck must be:
5.9L 359 OHV Turbo-Diesel 12 Valve between the years 1994-1998
check yo..
$27.99
Includes plug only. 22mm.
This SHOULD fit 94-01 Cummins engines, however if your oil pan has been swapped or you have an industrial applicati..
$22.77
Fluidampr Cummins Tach Sensor KitThis kit is required for 12 valve Cummins Trucks running the stock tach/alternator pickup.
This kit comes with a rel..
$66.30
Fleetguard LF3894 Stratapore oil filter for the 89-02 Dodge 5.9L Cummins Diesel.
Most filters look the same on the outside. It's what's inside tha..
$20.44
Features:
Outflows the stock intercooler with tubes and increases heat dissipation
Constructed out of cast 356-T6 aluminum end tanks
Incorporates..
$1,629.00
01-04 Duramax Intake Knuckle, Direct Bolt On Fit To Turbo, 30% Increase Air Flow Over Stock Knuckle, No Modification Required To Factory Air Intlet Tu..
$0.00
Backordered No ETA 11/14/2024
The T-rex Technologies Steering Box Brace is designed to take all of the movement out of the stock steering box. ..
$0.00
BACKORDERED NO ETA03+ Cummins Fuel Filter Delete Billet Aluminum
Uses Factory Banjo Bolts To Reinstall
T/Rex Tech part number: TRP-CRFFDEL..
$0.00
BACKORDERED NO ETAKit Includes:
2 Piece charge pipe
4 ply boot kit
Stainless steel clamps
TRex Tech part number: LMLDSCHRGPIPE..
$0.00
DISCONTINUEDFeatures:
Replaces Side & Front Freeze Plugs
Nice Finish
Includes Hardware
..
$0.00
BACKORDERED NO ETA89-98 Cummins Billet Twin Intake Plate
Features:
Includes Mounting Kit w/ Gasket Kit
Pre-Tapped w/Plugs..
$0.00
BACKORDERED NO ETAFits 4x4 application only.
The T-rex Technologies Steering Box Brace is designed to take all of the movement out of the stock stee..
$0.00
BACKORDERED NO ETAFeatures:
Engraved
Bright LEDs
Polished..
$0.00
BACKORDERED NO ETAT/REX adjustable track bar for 2nd gen dodges with relocation bracket and a cam adjustment and johnny joints at both ends. Accomoda..
$0.00
BACKORDERED NO ETAThese emblems can upgrade the look by replacing your current set of badges.
Features:
Polished
Billet
Blemish-Free
Set of Tw..
$0.00
BACKORDERED NO ETAAll Pre Assembled Like In Pics
2pc Washer Design
Stainless Steel Bolt & Nylon Washer Seal
4@ Allen Stud..
$0.00
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is..
$950.00
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is ..
$849.00
-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS..
$317.13
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.
All Pusher intake manifolds can be used with or witho..
$174.99
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$593.00
WHAT IT DOES
Your Cummins engine consumes a massive amount of air and struggles to breathe through its tiny, squashe..
Starting From $968.00
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater an..
Starting From $968.00
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.
The Pusher 12v manifolds are hydro boost compatible and..
$184.99
Arc-Flow Intake Manifold, Black Powdercoat, 98.5-02 Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Int..
$317.13
Blade Runner (Charged Manifold) Dodge Trucks- 98.5-02 L6-5.9L (td) Features Increase airflow by 32.9% over stock ..
$475.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
All Pusher intake manifolds can be used ..
$174.99
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$498.00
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$349.00
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$339.95
S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize ai..
$249.00