-80x80.jpg)
94-98 Dodge 5.9L Cummins Dual Intake Horn
- Part Number: CC-Dual-Intake-Horn
- Est. Ship Time: Usually Ships In 5-7 Business Days
$334.00
More from this brand
Starting From $35.00
-60x60w.jpg "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
Starting From $1,695.00
Starting From $225.00
Starting From $25.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
For those who want the custom look, a dual plate allows twin..
$180.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Polished 304 Stainless Steel intake horn for all (94-07) Dod..
$229.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
For those who want the custom look, a dual plate allows twin..
$180.00
Not running a mechanical lift pump anymore? This plate will bolt right in place of your stock lift pump, blocking off the port.
Includes blockoff pl..
$24.99
.40 over Stock Bowl Pistons on Backorder til Mid JuneContact to Confirm Availability **Updated on 04/18/2023**5.9L Cummins Overhaul/Rebuil..
$979.95
Cummins 12MM Head Stud Bottoming Tap We recommend you bottom-tap your engine block head-stud threads when installing 12mm ARP or A1 head studs to ensu..
$26.46
-250x250h.jpg "89-02 Dodge 5.9L Cummins Diesel Bolt-in Rear Freeze Plug")
Backordered
Backordered with No ETA **Updated on 05/24/2023**Solve that pesky rear freeze plug problem once & for all!
Includes plate that bolts..
$45.95
The only manifold available to give a substantial gain in power and fuel economy. Not cheap cast and not weak tubular. This is the finest fully CNC ma..
$700.00
This is for a set(6) of o-rings. Enough to replace all in valve covers.
6 of number 2 in image only.
Cummins part number: 3910824..
$14.08
Cummins: 3920921
Item number 6 in the picture...
$31.95
Front seal/o-ring for the P7100 injection pump found on 94-98 Dodge 5.9L 12 Valve Cummins trucks.Some people may call this a mounting gasket as well.&..
$15.68
DISCONTINUED1989-1998 12 Valve Cummins 5.9L Heavy Duty stock to 750hp The pushrod is a very important and often overlooked component in any high hors..
$0.00
DRP's new design makes installation even simpler. Only one hole to drill in the tank means less chances for a leak. Our sump ring also has more surfac..
$175.00
DiscontinuedFlows 150GPH! Fits 1994-1998 Dodge 5.9L Cummis Diesel Equipped trucks.PureFlow AirDog® manufactures and supplies AirDog® Fuel Air Se..
$0.00
Water to Air Intercooler - 16"x12.5"x4.5" - S/S I/O (Type 5) This impressive Liquid/Air intercooler is better than..
$339.00
Hot
94-07 5.9L Dodge Cummins Small Square Heater Grid Intake Gasket
Cummins: 3969988..
$10.02
Intake Gasket kit. These are factory replacement Cummins parts.
Set includes the base gasket and both square upper gaskets for the grid and horn.
I..
$34.65
This is Crazy Carl's 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.F..
$35.00
-250x250w.jpg "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.Crazy Carls P-Pump Conversion KitOne of the most complete kits..
$1,695.00
This item normally ships out in 2-3 business days EVEN if you choose expedited shipping.This is Crazy Carl's "Mega BHAF" (Big Honkin Air Filter) for 9..
$225.00
This barbed push-lock fitting allows the use of 1/2" fuel supply line to the P7100. It is a great way to get the 1/2" fuel lines on when using our 24v..
$25.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
Brackets, mount and linkage needed to use 24-Valve APP..
$169.00
Say goodbye to rusty shabby stock bolts!Beautiful 304 Stainless Steel hardware kit for installing Crazy Carl's Intake plate and/or horn. This ki..
$29.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
The Tunnel Ram 12V is a patented intake for the 91-98 Dodge ..
$359.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.Grid Heater Delete Block can be used to remove/replace the sto..
$69.00
Note- Please read full description before purchasing!This item normally ships out in 7-14 business days EVEN if you choose expedited shipping.
Compou..
$1,649.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, tubular steel. Comes w..
$169.00
Crazy Carl's 3.5" intercooler piping kit for the 1994-2002 Dodge 5.9L Cummins.
The polished aluminum piping looks great and its corrosion resis..
$259.00
Backordered
Backordered with NO ETA **Updated on 6/7/2023**This is a Special Order Part, Please Allow 1-2 Weeks for shipping.
The Tunnel Ram 2..
$295.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.High flow, smooth mandrel bent, 100 percent stainless steel.10..
$169.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.High flow, smooth mandrel bent, tubular steel or 304 stainless..
$179.00
Backordered
Backordered with NO ETA **Updated on 6/7/2023**
The Tunnel Ram CR is a new patented intake for the 03-07 Dodge Cummins 24V diesel engine...
$349.00
WHAT IT DOES
The Monster-Ram Gen 2 improves airflow from the
intercooler. It flows 72.7 lbs/min with Banks’ High-FlowHeater and Billet Intake..
Starting From $968.00
What it doesThe Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater and Billet I..
Starting From $968.00
89-98 Cummins 5.9L Billet Intake Plate Polished. Intake plate has been CNC machined, includes bolts to bolt the plate to the manifoldPart number: ..
$229.62
Fits pickups & cab & chassis trucks.
Looking for massive airflow increases for your high performance 6.7L Cummins? Need the ability to keep a..
$367.00
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$579.60
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.The Pusher 12v manifolds are hydro boost compatible and all..
$174.99
Pusher aluminum intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.The Pusher 12v intake manifolds are hydro boost co..
$199.99
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks. All Pusher intake manifolds can be used with..
$174.99
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
The Tunnel Ram 12V is a patented intake for the 91-98 Dodge ..
$359.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.Grid Heater Delete Block can be used to remove/replace the sto..
$69.00
Replaces factory heater grid on 98.5 to 2007 Dodge Cummins engines. Adds more air flow to engine.
Part number:HELGRIDDELETE..
$62.00
TwinRam intake manifold doubles the inlet area, optimizes air distribution into the cylinder head, and flows the boosted air proportionately into all ..
$729.00
S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize ai..
$249.00
GDP 6.7L "AIR-BOSS 67" Grid Heater Delete for Pickup ApplicationsEGT's running too high? Can't use all of the fuel you have available? The 6.7L Air-Bo..
$239.97
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, tubular steel. Comes w..
$169.00