-80x80.jpg)
89-98 Dodge 5.9L Cummins Tunnel Ram Dual Intake Plenum Cover
$185.00
- Part Number: CC-TRDual
- Est. Ship Time: Usually Ships In 1-2 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $220.00
Starting From $206.80
Starting From $184.00
Starting From $184.00
Dual intake horn promotes max flow to the head at both ends.
For use only with our dual intake plate(Not Included)
Comes with dipstick mount and..
$339.00
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
Dual intake horn promotes max flow to the head at both ends.
For use only with our dual intake plate(Not Included)
Comes with dipstick mount and..
$339.00
Another Crazy Carl's original product!Say goodbye to those old rusty shabby stock bolts!!Beautiful 304 Stainless Steel hardware kit for..
$29.00
Hot
94-07 5.9L Dodge Cummins Small Square Heater Grid Intake Gasket
Cummins: 3969988..
$10.58
Intake Gasket kit. These are factory replacement Cummins parts.
Set includes the base gasket and both square upper gaskets for the grid and horn.
I..
$34.66
This fits 1998.5-2007 Dodge 5.9L 24 Valve Cummins diesel trucks that have the grid heater AS A SEPARATE UNIT.
Some Dodge trucks have the grid heat..
$172.74
89-02 Dodge 5.9L Cummins Diesel Oil Pan Gasket
Cummins: 4337616
This replaces part number 3959052, no longer available...
$26.95
Cummins valve cover with oil filler cap.A must for those that run an adjustable pump gear or have installed a breather in place of the oil filler cap ..
$89.21
Dual Valve Cover Breather for the 89-98 5.9L 12 Valve Cummins DieselsAllows you to attach a hose to the valve cover to vent blowby.Great for high mile..
$437.97
FREEZE PLUG HEATERS
On 89-97 trucks this item is a direct replacement for your stock block heater. 97.5-02 trucks, you'll need to remove a freeze plu..
$148.71
Includes Cummins part numbers:
1x 5269589
1x 3905801 &n..
$332.59
This kit involves removing the rear freeze plug from the block and bolting a plate over it (shown in picture) and running a 5/8 ID coolant hose t..
$160.76
94-98 Dodge 12 Valve 5.9L Cummins DieselKiller Dowel Pin Repair Kit (KDP)
Includes:Crank SealDowel PinDowel Pin TabTiming cover gasket
BD Part Numbe..
$196.95
Cummins part numbers:
Thermostat: 3928499
Seal: 3925466
Seal: 3927305 ..
$87.09
1989-2002 12 & 24 Valve Dodge Cummins Large Intake Plate Gasket
Includes item #1 in the picture.
Cummins: 3938152..
$25.96
This item normally ships out in 2-3 business days EVEN if you choose expedited shipping.
Both Black and Blue boots now available!
This i..
$220.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100% stain..
$206.80
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100 percent stainless stee..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, tubular steel or 304 stain..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Polished 304 Stainless Steel intake horn for all (94-07) D..
$234.00
Dual intake horn promotes max flow to the head at both ends.
For use only with our dual intake plate(Not Included)
Comes with dipstick mount and..
$339.00
Another Crazy Carl original product!
The Tunnel Ram is a patented intake for the Dodge Cummins diesel engine. It's unique design increases the airf..
$364.00
Another Crazy Carls original product!This barbed push-lock fitting allows the use of 1/2" fuel supply line to the P7100. It is a great way to get the ..
$25.00
Backordered
Backordered with No ETA **Updated on 05/13/2024**
Another Crazy Carls original product!
The Tunnel Ram CR is a new patente..
$364.00
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
This is Crazy Carl's 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.F..
$35.00
-250x250w.jpg "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
One of the most complete kits available at t..
$1,710.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
Brackets, mount and linkage needed to use 24-Valve A..
$184.00
Another Crazy Carl's original product!Say goodbye to those old rusty shabby stock bolts!!Beautiful 304 Stainless Steel hardware kit for..
$29.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Another Crazy Carls original product!The Tunnel Ra..
$364.00
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is inclu..
$950.00
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is includ..
$849.00
-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS..
$317.13
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.
All Pusher intake manifolds can be used with or witho..
$174.99
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$582.00
PDP Pick
WHAT IT DOES
Your Cummins engine consumes a massive amount of air and struggles to breathe through its tiny, squashe..
Starting From $968.00
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater an..
Starting From $968.00
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.
The Pusher 12v manifolds are hydro boost compatible and..
$184.99
Arc-Flow Intake Manifold, Black Powdercoat, 98.5-02 Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Int..
$317.13
Blade Runner (Charged Manifold) Dodge Trucks- 98.5-02 L6-5.9L (td) Features Increase airflow by 32.9% over stock ..
$455.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks. All Pusher intake manifolds can be used with..
$174.99
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$498.00
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$349.00
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$329.95
S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize ai..
$249.00