-80x80.jpg)
-750x750w.jpg "07.5-09 Dodge 6.7L Cummins Diesel Shibby Engineering Grid Heater Delete")
-80x80w.jpg "07.5-09 Dodge 6.7L Cummins Diesel Shibby Engineering Grid Heater Delete")
07.5-09 Dodge 6.7L Cummins Diesel Shibby Engineering Grid Heater Delete
$149.99
- Part Number: 6.7LGHD
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $181.25
Starting From $93.75
Starting From $13.25
Starting From $39.00
-250x250w.jpg "07.5-09 Dodge 6.7L Cummins Diesel Shibby Engineering Grid Heater Delete")
The Shibby Engineering 6.7 Grid Heater Delete includes:
OEM Gaskets top and bottom
Machined out of 6061-T6 Billet aluminum
Rail Spacer..
$149.99
GDP 6.7L "AIR-BOSS 67" Grid Heater Delete
EGT's running too high? Can't use all of the fuel you have available? The 6.7L Air-Boss 67 Grid..
$248.99
'03-'07 5.9L "Air-Boss CR" Intake Plenum Cover & Grid Heater Delete Kit
EGT's running too high? Can't use all of the fuel you have av..
$349.99
'98.5-'02 5.9L "Air-Boss VP" Intake Plenum Cover & Grid Heater Delete Kit
EGT's running too high? Can't use all of the fuel you have ..
$319.99
DISCONTINUED
'07.5-'09 "Arctic Heat" 6.7L 3.50" High Flow Grid Heater
Note: Not for use on 2010+ vehicles.
The first and o..
$0.00
NOTE: For code free installation of the 6.7L Filter Eliminator the "Water in Fuel" sensor must be removed from the stock fuel filter and plu..
$74.99
2007.5-2012 6.7L Cummins Upper Engine Head Gasket Set
Includes:
1x M22 O-Ring Seal 3089240
2x O-Ring Seal 3678603
2x M18 O-Ring Seal 3678..
$823.55
This Cumins barring tool is used to rotate the engine by inserting it into a port located on the bell housing/engine adapter plate.It provides an easy..
$121.55
Discontinued (Updated 2/29/2024)
Mega-Flo S-3 Cummins 6.7L Intake Manifold
Fits 2007.5-2013 Dodge 6.7L Cummins Diesels.
Fits pickups &..
$0.00
The intercooler tube is constructed out of huge, mandrel bent 3” 409 stainless steel and is powder-coated for maximum cooling efficiency. Two heavy-du..
$249.00
Dodge 6.7L Cummins CCV (Crank Case Vent) Gasket
All ‘07.5-18 6.7 liter engines have a crankcase vent filter that is located on top of the valve cover..
$22.07
Item #5 in the picture. Fits 5.9L or 6.7L Cummins.
Cummins: 3963379..
$35.47
The thread-in Cylinder Head Freeze Plug Kit for your Dodge Cummins is designed to reduce the chance of "blowing out" the factory freeze plug..
$88.09
The Pusher Intake Manifold is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. The twin tube design nearly ..
$569.99
The aluminum oil cap is designed to fit all OEM valve covers for Cummins 24 valve engines 98.5+, as well as the Hellmann Performance Billet Valve Cove..
$43.00
DiscontinuedGet more performance out of your electronically controlled engine by plugging in one of BD’s Electronic Boost Builders. Installed in-line ..
$0.00
Diesel Only Locking Fuel Cap
Type
Diesel Only Locking Fuel Cap
Locking
Yes
Cam Type
Quick-on
Venting
Pressure Vacuum
Sh..
$17.60
Replacement crank case Pressure Sensor, for 6.7L Cummins.
Item #12 in the picture.
Superseded Part Number: 4984575
Cummins: 54622..
$127.97
Will work with 1998.5 to 2002 and 2004.5-2023 and up Cummins diesel engines. Will also work on Cummins ISX diesels.
2003-2004 Cummins engines Click H..
$31.26
Shibby Engineering's boost tube is designed to replace the factory intercooler tube. It is constructed from 3.5" mandrel bent stainless steel. The boo..
$181.25
The Shibby Engineering Throttle Valve Delete removes the factory throttle valve found on the bottom of the cast intake elbow on your 6.7L Cummins. Whi..
$93.75
This item works on 07.5-09 trucks only with the 4 wire throttle valve plug.
Features:
Two OEM connectors for use with unplugged EGR bypass valves..
$13.25
One rail plug CNC machined for the fuel rail on a dodge cummins engine. Also known as a race fuel valve. This plug replaces the factory banjo bolt mo..
$39.00
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$593.00
The BladeRunner intake manifold represents the next generation in intake manifold design. The BladeRunner intake manifold uses a unique MDV (Multiple ..
$535.00
PDP Pick
WHAT IT DOES
Your Cummins engine consumes a massive amount of air and struggles to breathe through its tiny, squashe..
Starting From $968.00
The Pusher Intake Manifold is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. The twin tube design nearly ..
$569.99
Our 6.7L MEGA Intake Manifold is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. The twin tube design near..
$749.99
FOR 2007.5-2012 DODGE RAM 2500/3500 6.7L CUMMINS- DOES NOT FIT CAB & CHASSIS TRUCKS.
The stock elbow and heater kill airflow into your en..
$968.00
GDP 6.7L "AIR-BOSS 67" Grid Heater Delete for Pickup Applications
EGT's running too high? Can't use all of the fuel you have available? T..
$239.99
GDP 6.7L "AIR-BOSS 67" Grid Heater Delete
EGT's running too high? Can't use all of the fuel you have available? The 6.7L Air-Boss 67 Grid..
$248.99
Replacement intake cover, includes grid heater for 6.7L Cummins.
WILL ONLY WORK on a Cab & Chassis truck.
Cummins part number: 5335502...
$564.55
The Shibby Engineering Throttle Valve Delete removes the factory throttle valve found on the bottom of the cast intake elbow on your 6.7L Cummins. Whi..
$93.75
The Banks grid heater delete removes the factory heater grid on the 6.7L Cummins. Benefits include, increased throttle response and quicker spool up, ..
$199.00
Eliminate the risk of a failed grid heater bolt dropping into your engine on your 2007.5-2012 6.7L Cummins with our high flow intake plenum! Our..
$199.00
GDP 6.7L "AIR-BOSS 67" Grid Heater Delete for '07.5-'18 Cab & Chassis Applications
That's right, we didn't forget about the C&C o..
$255.99
When more airflow is needed on your 6.7 liter Cummins, this is one of the first parts to consider. With 30+ percent more air flow then stock, this is ..
$199.00
All Pusher intake manifolds for the 2007-2018 Cummins 6.7L trucks are built around a 3.5" inlet that smoothly transitions to two 3" mandrel ..
$399.99