-80x80.jpg)
03-07 Dodge 5.9L Cummins Pusher 3.5
$499.99
- Part Number: PDC0307MKT
- Est. Ship Time: Some Built On Demand Contact to Confirm
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $1,099.99
Starting From $1,099.99
Starting From $174.99
Hot
Installing a new exhaust manifold, or simply removing a stock or aftermarket manifold to change gaskets? If so, you'll find that it is a real hassle t..
$52.99
Replaces factory heater grid on 98.5 to 2007 Dodge Cummins engines. Adds more air flow to engine.
Part number:HELGRIDDELETE..
$62.00
Description: 4 Ply Silicone Sleeve, 4" I.D. x 3" long
Material: 4 Ply Reinforced Silicone
Warranty: ..
$22.50
PDP Pick
S&B Cold Air Intakes increase cool airflow to your engine while still protecting it from harmful dirt and debris. More airflow has been shown to incre..
$349.00
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
Black Pure Diesel Power T-Shirt
Currently available in the following sizes: Small, Medium, Large, XL, 2XL, 3XL, and 4X.
Need a different s..
$17.95
Royal Blue Pure Diesel Power T-Shirt
Front of shirt has a smaller logo. Rear of shirt has larger logo and phone number. The shirt color may very sl..
$15.00
Not compatible with 2015-2016 Cab Chassis vehicles (F450 / F550)
The all-new Pusher Powerflow Intake Manifold / Turbo Inlet Package addresses the w..
Starting From $1,099.99
What's the difference? Our One-Piece vs Two-Piece Hot Side Charge Tube
Pusher 3" Hot & Cold Side Charge Tubes with Throttle Valve Ada..
Starting From $539.99
The all-new Pusher Powerflow Intake Manifold / Turbo Inlet Package addresses the weakest airflow component of the 6.7L Powerstroke engine since its in..
Starting From $1,099.99
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.
All Pusher intake manifolds can be used with or witho..
$174.99
The Pusher Max Driver-Side Charge Tube routes air from your factory turbocharger along a more streamlined path to the intercooler via our mandrel bent..
$239.99
The Pusher Upper Coolant Tube converts the failure prone OEM rubber hose with plastic ends and plastic thermostat housing to a full aluminum and ..
Starting From $429.99
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.
The Pusher 12v manifolds are hydro boost compatible and..
$184.99
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
All Pusher intake manifolds can be used ..
$174.99
The intake manifold tubing is mandrel bent, the flange CNC-machined, and welds are TIG welded - all made in the USA. Available in a variety of powder ..
$199.99
To help 6.4L owners improve performance throughout the power curve, Pusher has designed an unobstructed 3” post intercooler intake system. This new sy..
$439.99
This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifol..
$449.99
Full 3.5" MEGA post intercooler intake system for Cummins 5.9 liter turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.The 3.5" MEGA Intake S..
$479.99
The Pusher 3" Cross-Air works with the factory intake manifold or any factory replacement manifold and is the most cost effective way to protect your ..
$299.99
This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifol..
$499.00
The Pusher Intake Manifold is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. The twin tube design nearly ..
$569.99
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is..
$950.00
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is ..
$849.00
-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS..
$317.13
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.
All Pusher intake manifolds can be used with or witho..
$174.99
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$593.00
PDP Pick
WHAT IT DOES
Your Cummins engine consumes a massive amount of air and struggles to breathe through its tiny, squashe..
Starting From $968.00
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater an..
Starting From $968.00
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.
The Pusher 12v manifolds are hydro boost compatible and..
$184.99
Arc-Flow Intake Manifold, Black Powdercoat, 98.5-02 Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Int..
$317.13
Blade Runner (Charged Manifold) Dodge Trucks- 98.5-02 L6-5.9L (td) Features Increase airflow by 32.9% over stock ..
$475.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
All Pusher intake manifolds can be used ..
$174.99
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$498.00
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$349.00
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$339.95
S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize ai..
$249.00