2003-2007 Dodge 5.9L Cummins Intake Horns & Manifolds

-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS Intake Manifold offers these benefits: The Arc-Flow intake manifold provides a smooth non-abstractive path for the air exiting the intercooler as it..

Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks. All Pusher intake manifolds can be used with or without the factory heater grid. Fully TIG welded, 3" mandrel bent tubing, with a 1/2" thick flange and 1/4" thick dipstick mount. This inta..

At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to make it all happen the engine has to breathe freely and without needless restrictions. Finding ways to pump your engine full of cooler, denser air has..

At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to make it all happen the engine has to breathe freely and without needless restrictions. Finding ways to pump your engine full of cooler, denser air has..

Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions the fasteners outside of the manifold (instead of through it) to reduce airflow restriction, and two convenient ports (one pre-tapped) make it easy to..

S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize airflow, improve turbo spool, and lower EGT’s. Every intake elbow comes complete with all hardware and gaskets needed for a quick, hassle-free installat..

Blade Runner (Charged Manifold) Dodge Cummins (03-07) L6-5.9L (td)     * Multiple directional vanes (MDV Technology)    * Smooth and direct airflow for minimal pressure loss and maximum CFM gains.    * 2 pre-tapped ports and 3 untapped port pads on back-..

Arc-Flow Intake Manifold, Black Powdercoat, 2006-2007 24 Valve Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Intake Manifold offers these benefits: The Arc-Flow intake manifold provides a smooth non-abstractive path for the air exiting the intercooler..

The Banks Power Big Hoss Intake Manifold System - 42747 has been specialy designed to maximize race performance for your 2003-2007 5.9L Dodge Cummins engine's air intake system. A Banks Racing product developed on the Banks Cummins Sidewinder® Dakota, the Big Hoss Intake Manifold is the world..

This item normally ships out in 3-5 business days EVEN if you choose expedited shipping. High flow, smooth mandrel bent, tubular steel or 304 stainless steel. 100% TIG welded construction Comes with dipstick bracket and two 1/8 NPT ports for accessories such as water-meth, boost reference..

Power-Flo intake manifolds for the '03-'07 Dodge Rams are the ones you've been looking for! The Power-Flo is a direct factory replacement for the restrictive factory intake manifold found on the Dodge Common Rail powered trucks. We begin with a one piece mandrel bent tube for perfect fit and r..

This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifold and the air starvation of the front and rear cylinders.The Cross-Air adapts to existing ports at the front and rear of the intake plenum that are no..

The Pusher 3.5" MEGA Intake System with replaces your stock post-intercooler piping and intake manifold with 3.5" mandrel bent tubing, increasing the flow efficiency of your charge system by 55%. This system includes heavy-duty 4-ply couplers to replace the factory boots, stainless steel T-bolt clam..

This item normally ships out in 3-5 business days EVEN if you choose expedited shipping. Polished 304 Stainless Steel intake horn for all (94-07) Dodge Cummins trucks it works with VP or P7100 and even dual CP3 configurations and is a great compliment to our Tunnel Ram high flow intake plates. ..

Replaces factory restricted intake horn on 03 – 07 Dodge Cummins. Fabricated with two 1/8th NPT bungs for boost reading or injection. Intake horn for 5.9 Cummins Diesel Engines3" Pipe.  ..

Pusher 3" Cross-Air for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.The Pusher 3" Cross-Air works with the factory intake manifold or any factory replacement manifold and is the most cost effective way to protect your front and rear cylinders on trucks under the 500HP mark. The C..

Billet Stage 2 Intake Manifolds The Billet Stage 2 Intake Manifold is designed for our Stage 2 cylinder heads. They are sold with either 5.9 intake and fuel or 6.7 intake and fuel setups. These intakes utilize the stock intake horn locations and fuel setups.  It comes with all the mou..

  Custom Side Draft Intake Manifold Plenum for the 03-18 Cummins 5.9L or 6.7L   Features: Equal Air Distribution Outflows Competitors Competitively-Priced Stainless Steel Construction Thicker Top Plate to reinforce CP3 Bracket We're not joking around anymore, not eve..

The Hellmann Billet Intake Manifold is the original one-piece side draft intake manifold. The innovative design was initially created to solve the issues stemming from porting and polishing process on the intake side of the cylinder head. To properly perform this function, the cast manifold must be ..

For those living in warm climates where cold starts are not an issue, the OE heater grid can be replaced with S&B’s Heater Block Delete, which will provide a 30.91% improvement in airflow. S&B's Heater Block Delete is CNC Machined from 6061 – T6 Aluminum and is built for extreme performance...

This fits 1998.5-2007 Dodge 5.9L 24 Valve Cummins diesel trucks that have the grid heater AS A SEPARATE UNIT. Some Dodge trucks have the grid heaters built into the intake plenum. This item will NOT work on trucks with this setup. Includes ONLY item number 3. Cummins:  3969987 Requ..

If you want another half pound of boost, our Banks Billet Heater Delete is just the ticket. And...unlike some setups, when winter comes, you can put the Heater back in. Banks: 42732..

Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed to warm the air during cold starts. This allows maximum airflow to pass through. Made of Quality aircraft grade aluminum and CNC milled right here i..

Replaces factory heater grid on 98.5 to 2007 Dodge Cummins engines. Adds more air flow to engine. Part number:HELGRIDDELETE..

Billet intake grid heater delete for Dodge Cummins 5.9L 12-Valve & 24-Valve engines. (Stock Height). Groove is cut for Injector #1 for clearance,with 2-1/8" ports.  Made in Tennessee, USA   Kit Includes: -Grid heater delete -2  1/8" Side ports with fitting..