









03-05 Dodge CR 24V Cummins ATS High Flow Intake Manifold
$317.13
- Part Number: 2019012272
- Est. Ship Time: Usually Ships By Next Business Day

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Starting From $2,421.05
Starting From $793.00
-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection,
Includes Powder Coating and Machining.
The ATS Intake Manifold offers these benefits:
The Arc-Flow intake manifold provides a smooth non-abstractive path for the air exiting the intercooler as it enters the engine. There is the one basic element that is required to produce power and reduce EGT's in a Diesel engine, that element is "Oxygen".
Oxygen is the key element of life, and oxygen is the key to the Diesel engine. Air volume provides the necessary element to efficiently burn the fuel that is injected into the combustion chamber.
The stock intake manifold on the Cummins 5.9L engine acts as a restrictor plate does on a NASCAR engine. A restrictor plate reduces the amount of air that can enter the engine limiting the overall power output.
The ATS Arc-Flow intake manifold allows the air to expand at a rate that does not create turbulence as it is fed into the cylinder head.
As the incoming air opens into a larger expansion area the air will tumble if expanded to quickly. The Arc-Flow intake is specially engineered to allow for maximum expansion of only 7 degrees providing a perfectly controlled expansion of air-flow into the cylinder head.
The Arc-Flow also comes pre-taped for perfect distribution of water injection. When looking for economy, towing or performance the Arc-Flow is the best add on that can be easily bolted to any Cummins 5.9L Diesel.
- Lowers Exhaust Gas Temperatures
- Better throttle response
- Superior Arc-flow design increases intake efficiency and air velocity over that of a stock intake manifold with much greater internal cross section. (see image - right)
- Ideal when upgrading your turbo.
- Shrouded back side of intake is pre-tapped for easy and clean gauge installation and other auxiliary inputs.
- Will not void warranty.
- Pre-tapped for water injection directly above the intake plenum.
anifold.
Dyno results show that the ATS Arc-flow's average gain is over 10 Horsepower and 21 lb/ft of Torque.
Includes Powder Coating and Machining.
The ATS Intake Manifold offers these benefits:
The Arc-Flow intake manifold provides a smooth non-abstractive path for the air exiting the intercooler as it enters the engine. There is the one basic element that is required to produce power and reduce EGT's in a Diesel engine, that element is "Oxygen".
Oxygen is the key element of life, and oxygen is the key to the Diesel engine. Air volume provides the necessary element to efficiently burn the fuel that is injected into the combustion chamber.
The stock intake manifold on the Cummins 5.9L engine acts as a restrictor plate does on a NASCAR engine. A restrictor plate reduces the amount of air that can enter the engine limiting the overall power output.
The ATS Arc-Flow intake manifold allows the air to expand at a rate that does not create turbulence as it is fed into the cylinder head.
As the incoming air opens into a larger expansion area the air will tumble if expanded to quickly. The Arc-Flow intake is specially engineered to allow for maximum expansion of only 7 degrees providing a perfectly controlled expansion of air-flow into the cylinder head.
The Arc-Flow also comes pre-taped for perfect distribution of water injection. When looking for economy, towing or performance the Arc-Flow is the best add on that can be easily bolted to any Cummins 5.9L Diesel.
- Lowers Exhaust Gas Temperatures
- Better throttle response
- Superior Arc-flow design increases intake efficiency and air velocity over that of a stock intake manifold with much greater internal cross section. (see image - right)
- Ideal when upgrading your turbo.
- Shrouded back side of intake is pre-tapped for easy and clean gauge installation and other auxiliary inputs.
- Will not void warranty.
- Pre-tapped for water injection directly above the intake plenum.
anifold.
Dyno results show that the ATS Arc-flow's average gain is over 10 Horsepower and 21 lb/ft of Torque.

-Arc Flow Intake, 2003-2005 Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection, Includes Powder Coating and Machining. The ATS..
$317.13
Blade Runner (Charged Manifold) Dodge Cummins (03-07) L6-5.9L (td)
* Multiple directional vanes (MDV Technology) ..
$475.00
Only Auto Meter has the top quality full coverage "A" pillar gauge mounts for your 1998-2002 Dodge 1500/2500/3500 full size truck.
The 1720..
$80.60
Autometer C2 0-1600 Degree Pyrometer Stepper MotorFull Sweep, Stepper Motor meter movement.Air-Core meter movement.Includes Type K Thermocouple.Autome..
$231.83
Autometer C2 0-35PSI Boost GaugeIncludes 6 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fittings. Autometer: 7104..
$91.44
Are you in need of a way to access the pressurized intake air system for use with a Boost gauge? This adapter has a hole drilled through it that allow..
$19.65
2003-2007 Dodge 5.9 Cummins AFE Stage 2 Intake System with Pro Dry 5 Filter Media
Flows 390 CFM vs the stock 180CFM!
Click here for installation..
$0.00
Dodge 03-04 Nozzle Set: 30 Percent over Nozzle Set. With Stock CP3, enough fuel to support 600 RWHP, more power possible with larger CP3.
..
$709.41
'03-'06 Dodge 5.9L Cummins "Torque Tube" This new accessory to the aFe '03-'04 Dodge Cummins Air Intake Kit (PN 54-10411 or PN 75-10411) replaces the ..
$99.00
Range: 0-35 psi Notes: Includes 10 ft. nylon tubing with 1/8" NPT fit..
$87.89
Range: 0 - 2000 deg. F Notes: Full Sweep, Stepper Motor meter movement. Includes Type K Thermocouple...
$222.46
Full Sweep, Stepper Motor meter movement. Includes 8 ft. tubing or wiring harness. For use with 2003-2007.5 Dodge Cummins 5.9L and GM Duramax LB7 & LL..
$215.58
2003-2009 Dodge Ram 2500/3500 3 Gauge Dash Top Pod
Only Auto Meter has the top quality dash top gauge mounts for your 2003+ Dodge Full Size trucks. T..
$70.09
Range: 0-60 psi Notes: Includes 10 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fitting...
$86.69
Two Gauge A Pillar Mount -Replaces the Factory A Pillar by Bolting on Instead of Having to Cut the Handle Off of the Factory A Pillar and Mounting on ..
$91.98
With two layers of progressively finer mesh synthetic media between 100% polyurethane top and base, this high flow, “oil-free” conical performance fil..
$93.00
07.5-2018 6.7L Cummins Diesel Turbo to Manifold T4I Flange Gasket
T4I FlangeCummins Part number: 5260648..
$17.93
ATS Aurora AFR 3000 Aftermarket Factory Replacement TurbochargerFitment: 2001-2004 GM 6.6L DuramaxPart Number: 2023024248If you want a turbo that..
$2,421.05
ATS BoostFooler Electronic Fuel Regulator
Fitment: 2001-2010 GM 6.6L Duramax
The BoostFooler Electronic Fuel Regulator will allow..
$69.76
Fits: 2001-2010 6.6L Duramax LB7/LLY/LBZ/LMMThis billet steel input shaft is made to fix a weak link in your GM Duramax truck with Allison transm..
$793.00
2003-2007 Dodge 5.9L Common Rail Cummins, 2-Piece Exhaust Manifold, T3, NON-Wastegated, Comes Assembled with Black High Temperature Coating and Pre-T..
$594.99
ATS Pulse Flow Exhaust Manifold Kit Fits 2003-2007 5.9L Cummins 2-Pc T3 With Gaskets Premium Hardware
Since ATS released the first Pulse Flow Manif..
$694.99
ATS Pulse Flow Exhaust Manifold Kit Fits 2003-2007 5.9L Cummins 2-Pc T3 With Turbo Flange Hardware
Since ATS released the first Pulse Flow Manifold..
$549.99
ATS Fuel Rail Pressure PlugFitment: 2003-07 Dodge 5.9L CRA common failure of the Ram 5.9L Common Rail Cummins is the pressure relief valve. These reli..
$30.00
Fits:
2003-2007 Dodge 5.9L Cummins
This ATS 2049202272 Pulse Flow Exhaust Manifold is the perfect component for your truck! This Manifold ..
$594.99
Fits: 2003-2019 Dodge 2500/3500 (Equipped With 11.5 AAM Differential)2.5 quart fluid capacity over stockOptimal gear lubricationEasy fluid service wit..
$280.68
Fits: 2004.5-2007 5.9L CumminsFeatures:Progressive line riseAllows 1st-2nd gear lock-upOptimized to work with 3000 rpm governor springsIncreased relia..
$685.13
ATS Fuel Rail Pressure PlugFitment: 2004½-2010 GM 6.6L Duramax (LLY, LLY/LBZ, LLM) A common failure of the GM LLY, LLY/LBZ, LLM 6.6L Duramax..
$30.00
ATS Aurora VFR 3000 Stage 1 TurbochargerFitment: 2004.5-2010 GM 6.6L DuramaxPart Number: 2023024290If you want a turbo that has a clean install, ..
$2,249.00
ATS Aurora VFR 4000 Stage 2 TurbochargerFitment: 2004.5-2010 GM 6.6L DuramaxPart Number: 2024024290If you want a turbo that has a clean install, ..
$2,631.58
ATS protector/ front diff cover for 05-16 Ford Super Duty trucks with Dana 60's.ATS: 4029011000..
$280.68
Fits: 2006.5- 2007 Dodge 5.9L Cummins (Prod. Date 05/2006 & Up)*
This ATS 601-900-2317 Co-Pilot Lockup Controller is the perfect component for ..
$600.00
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is..
$950.00
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is ..
$849.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.
All Pusher intake manifolds can be used with or witho..
$174.99
Features:
In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x..
$593.00
WHAT IT DOES
Your Cummins engine consumes a massive amount of air and struggles to breathe through its tiny, squashe..
Starting From $968.00
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater an..
Starting From $968.00
Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks.
The Pusher 12v manifolds are hydro boost compatible and..
$184.99
Arc-Flow Intake Manifold, Black Powdercoat, 98.5-02 Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Int..
$317.13
Blade Runner (Charged Manifold) Dodge Trucks- 98.5-02 L6-5.9L (td) Features Increase airflow by 32.9% over stock ..
$475.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
All Pusher intake manifolds can be used ..
$174.99
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$498.00
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$349.00
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$339.95
S&B Intake Elbows are CNC Machined from a 6061 – T6 Aluminum andreplace your restrictive stock turbo inlet manifold. Our intake elbows maximize ai..
$249.00
Blade Runner (Charged Manifold) Dodge Cummins (03-07) L6-5.9L (td)
* Multiple directional vanes (MDV Technology) ..
$475.00