2003-2007 Dodge 5.9L 24V Cummins Exhaust Manifolds

  03-07 T3 Commonrail CR Cummins Exhaust Manifold The only manifold available to give a substantial  gain in power and fuel economy. Not cheap cast and not weak tubular. This is the finest fully CNC machined billet turbo manifold on the planet. Easily outperforms every other manifo..

Installing a new exhaust manifold, or simply removing a stock or aftermarket manifold to change gaskets? If so, you'll find that it is a real hassle to keep the gaskets in place when using standard bolts. These work on:89-98 12 Valve Cummins engines using an AFTERMARKET exhaust manifold. They WILL ..

2003-2007 Dodge 5.9L Common Rail Cummins, 2-Piece Exhaust Manifold, T3, NON-Wastegated, Comes Assembled with Black High Temperature Coating and Pre-Tapped for Pyrometer Probe.** California E.O. Certified ** PulseFlow Exhausts Feature and Benefits: Increased reliability Improved exhaust flow Pa..

ATS Pulse Flow Exhaust Manifold Kit Fits 2003-2007 5.9L Cummins 2-Pc T3 With Gaskets Premium Hardware Since ATS released the first Pulse Flow Manifold in 1995, the quest to provide the very best Manifold on the market has never stopped. Nearly 35 years later, ATS is still leading the industry wit..

ATS Pulse Flow Exhaust Manifold Kit Fits 2003-2007 5.9L Cummins 2-Pc T3 With Turbo Flange Hardware Since ATS released the first Pulse Flow Manifold in 1995, the quest to provide the very best Manifold on the market has never stopped. Nearly 35 years later, ATS is still leading the industry with t..

 BD Power Two Piece Exhaust Manifold - 03-07 Dodge 5.9L Cummins Stop exhaust manifold cracks in their tracks with BD’s new Pulse exhaust manifold for the Dodge-Cummins. Cast from high silicon ductile iron, the Pulse features expansion joints that allow the manifold to expand and contract without cr..

2-Piece Exhaust Manifold for 2003-2007 3rd Gen Dodge Cummins Common Rail Does not include turbo to manifold gasket, and you must re-use your stock turbo mounting hardware unless option selected above. The DPS 2-Piece Manifold for the Dodge Cummins  Common Rail (CR) engine is both a grea..

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold.  The aFe Bladerunner exhaust manifold is constructed out of cast 304 stainless steel with a reinforcing rib for strength.  The Bladerunner exhaust manifold produces an air flow increase of 23% over the ..

This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.Ideal replacement - this exhaust manifold was precision-engineered and d..

  The only manifold available to give a substantial gain in power and fuel economy. Not cheap cast and not weak tubular. This is the finest fully CNC machined billet turbo manifold on the planet. Easily outperforms every other manifold available. Engine dyno testing shows a 30HP gain ..

DPS-X 3-Piece EXHAUST MANIFOLD for 1998.5-2002 Dodge Cummins 24VPlease note! This manifold is a center dump manifold and is designed to replace the factory exhaust manifold on 1998.5-2002 5.9L Cummins trucks. It can be used on trucks as new as 2018, however, since 2003-2018 trucks have an offset tur..

Stock 3rd gen 5.9L Commonrail Cummins exhaust manifold, by CumminsT3 flange. Single piece undivided flange design. Don't forget gaskets and mounting bolts! Cummins: 4931223Mopar: 5135788AC..

 BD Power Two Piece Exhaust Manifold - 03-07 Dodge 5.9L Cummins Stop exhaust manifold cracks in their tracks with BD’s new Pulse exhaust manifold for the Dodge-Cummins. Cast from high silicon ductile iron, the Pulse features expansion joints that allow the manifold to expand and contract without cr..

The aFe BladeRunner exhaust manifold for the popular 03-07 Dodge Ram Cummins with the L6-5.9L (td) engine sets a new standard in manifold design. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by up to 23%, improving performance and throttle response. The thick wall ..

Pulse Flow Wide Flange T4 Exhaust Manifold, 2-Piece - 2003+ Dodge 5.9L & 6.7L Cummins This manifold DOES NOT include any emissions provisions for 2007.5+ trucks and this T4 flange is NOT the same as the T4I flange found on 6.7L Cummins turbos.  (Not legal for street use in California) PulseFlow Exha..

  The only manifold available to give a substantial  gain in power and fuel economy. Not cheap cast and not weak tubular. This is the finest fully CNC machined billet turbo manifold on the planet. Easily outperforms every other manifold available. Includes turbo mounting hardware..

  Center dump COMPETITION series Steed Speed Exhaust Manifold Available in a T4 or T6 turbo exhaust flange. This header has been designed for those who are pushing the extreme limits with their Cummins.  Passages are bigger than the standard manifolds with revised passage rout..

McBee part number: M-3709861..

Cummins Part Number: 3709861..

  The only manifold available to give a substantial gain in power and fuel economy. Not cheap cast and not weak tubular. This is the finest fully CNC machined billet turbo manifold on the planet. Easily outperforms every other manifold available. Engine dyno testing shows a 30HP gain ov..

Multilayer Steel Exhaust Manifold Gasket  Will fit Cummins 5.9L & 6.7L 24 Valve and 24V common rail engines. Sold individually, 6 needed for entire engine. Source Automotive part number: SAEMG-24V-MLS..

Please note! This manifold is a center dump T-4 flange manifold and is designed to replace the exhaust manifold on 1998.5-2002 5.9L Cummins trucks when the using an aftermarket turbo with a T-4 flange. It can be used on trucks as new as 2018, however, since 2003-2018 trucks have an offset turbo flan..

Please note! This manifold is a center dump T-6 flange manifold and is designed to replace the exhaust manifold on 1998.5-2002 5.9L Cummins trucks when the using an aftermarket turbo with a T-6 flange. It can be used on trucks as new as 2018, however, since 2003-2018 trucks have an offset turbo flan..

98.5-2002 Dodge 24-Valve, 3-Piece Exhaust Manifold, Comes Assembled with Black High Temperature Coating and Pre-Tapped for Pyrometer Probe ** California E.O. Certified **Please note! This manifold is a center dump manifold and is designed to replace the factory exhaust manifold on 1998.5-2002 5.9L ..

Fits: 1998.5-2018 Dodge 5.9L & 6.7L Cummins trucks. Please note! This manifold is a center dump T-4 flange manifold and is designed to replace the exhaust manifold on 1998.5-2002 5.9L Cummins trucks when the using an aftermarket turbo with a T-4 flange. It can be used on trucks as new as 20..

Please note! This manifold is a center dump manifold and is designed to replace the factory exhaust manifold on 1998.5-2002 5.9L Cummins trucks. It can be used on trucks as new as 2018, however, since 2003-2018 trucks have an offset turbo flange and in 6.7L applications has a different turbo flange ..

Diesel Auto Power presents CNC machined 3pc manifold. For 1998.5-2002 24v with round exhaust ports and T3 foot or 2nd gen manifold swap for +2003. CNC ported/gasket matched to improve airflow and reduce exhaust gas temps (EGT) by about 50 degrees. Replace your warped or cracked manifold with a perfo..

Diesel Auto Power presents CNC machined 3pc manifold. For 1998.5-2002 24v with round exhaust ports and T4 foot or 2nd gen manifold swap for +2003. CNC ported/gasket matched to improve airflow and reduce exhaust gas temps (EGT) by about 50 degrees. Replace your warped or cracked manifold with a perfo..

Pulse Flow Wide Flange T4 Exhaust Manifold, 3-Piece - 1998.5-2002 Dodge 5.9L 24-Valve Cummins (Not legal for street use in California) Please note! This manifold is a center dump T-4 flange manifold and is designed to replace the exhaust manifold on 1998.5-2002 5.9L Cummins trucks when the using an..

Please note! This manifold is a center dump manifold and is designed to replace the factory exhaust manifold on 1998.5-2002 5.9L Cummins trucks. It can be used on trucks as new as 2018, however, since 2003-2018 trucks have an offset turbo flange and in 6.7L applications has a different turbo flange ..

T-4 Stainless Diesel Cummins Exhaust manifold.  Please note! This manifold is a center dump T-4 flange manifold and is designed to replace the exhaust manifold on 1998.5-2002 5.9L Cummins trucks when the using an aftermarket turbo with a T-4 flange. It can be used on trucks as new as 20..

  T-3 Stainless Diesel Cummins T3 Exhaust manifold Please note! This manifold is a center dump manifold and is designed to replace the factory exhaust manifold on 1998.5-2002 5.9L Cummins trucks. It can be used on trucks as new as 2018, however, since 2003-2018 trucks have an offset t..

This manifold blanket fits 2003-up stock and aftermarket Common Rail Cummins exhaust manifolds. *  Faster Spool Up.*  Lower under hood temps.*  Cooler Intake air temps.*  Lower exhaust gas temps.*  Fast Install.*  Will not become brittle, stays soft ..

Cummins part number 3944655. Price is for single bolt only. If more is required please select the appropriate quantity..

Replacement OEM turbo mount nuts. M10 X 1.5 Takes 4 for a complete set. These are sold INDIVIDUALLY.  Number 5 in Image...

Don't reuse the old, corroded bolts when installing a new exhaust manifold on your 1989-2018 Dodge 5.9/6.7L Cummins, replace them with the XDP Exhaust Manifold Installation Bolt Kit XD230. This kit includes (12) stainless steel allen head bolts and (12) stainless steel lock washers so you can instal..

Replacement OEM turbo mount stud. M10 X 1.5 X 44.0 mm Takes 4 studs for complete set on some Cummins Applications.  Number 4 in Image...

Get the most versatile turbo mounting kit for your 1994-2007 Dodge 5.9L Cummins with the BD-Power 1045983 Turbocharger Mounting Kit. This kit includes all the gaskets, O-rings, studs, nuts and washers you need mount a new turbo or reinstall your old turbo into your truck.    Features..

94-07 Dodge 5.9L Cummins Stock Exhaust Manifold Turbo Studs & Nuts (4 nuts, 4 studs) Part numbers: 3971421 - Discontinued, New Part Number: 5140306AA 3818824..

94-12 Dodge 5.9L/6.7 Cummins Stock Exhaust Manifold Turbo Stud Nuts (4) Nuts ONLY! Does NOT include studs. If you are looking for both, CLICK HERE. Cummisn part number: 3818824  ..

Fleece Performance stainless steel exhaust manifold stud kit for Cummins. Our exhaust manifold studs are produced in the USA from aged 630 stainless steel and feature a 7mm external hex head for easy installation. Impervious to rust and corrosion, these studs not only look good, but allow for higher..

Fleece Performance stainless steel exhaust manifold stud kit for Cummins. Our exhaust manifold studs are produced in the USA from aged 630 stainless steel and feature a 4mm internal hex head for easy installation. Impervious to rust and corrosion, these studs not only look good, but allow for higher..

94-2018 Dodge 5.9L & 6.7L Cummins Stock Exhaust Manifold Turbo Studs (4)M10 X 1.5 X 44.0 mm Part # 3818823x4 Image For Reference Only..

Fits 94-2018 Dodge 5.9L & 6.7L Cummins M10 X 1.5 X 44.0 mm McBee part number: M-3818823..

T4-T3 Adapter Flange With T4 sized turbine housings, there is no performance advantage to changing the exhaust manifold to match... So, why go to the expense? Our adapter flange makes for an inexpensive alternative to replacing the manifold and allows for quicker changes back and forth from T4 to T..

Replace the broken or stretched exhaust manifold bolts on your 1998.5-2018 Dodge 5.9L/6.7L Cummins with the BD-Power 1045982 Exhaust Manifold Bolt & Spacer Hardware Kit. The exhaust spacers are black oxide coated and allow the fasteners to stretch without fracture or permanent yield. This exhaust ma..

Fits: 1998.5-2023 Dodge Ram 5.9L/6.7L Cummins (Fits Factory & OEM Manifold) This Full Send Diesel Exhaust Manifold Stud Kit is a quality upgrade for the exhaust manifolds bolts on your truck. These stainless-steel studs are manufactured to withstand added pressure from higher horsepower app..

This black 1.0in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley is required, although it could be used in any T4 application.  NOTE: A T4 gasket should be used on the top and bottom of the spacer to provide..