89-18 Dodge 5.9L Cummins Turbo Mounting Nut

Replacement OEM turbo mount stud. M10 X 1.5 X 44.0 mm Takes 4 studs for complete set on some Cummins Applications.  Number 4 in Image...

  Center dump COMPETITION series Steed Speed Exhaust Manifold Available in a T4 or T6 turbo exhaust flange. This header has been designed ..

Single Layer Exhaust Manifold Gasket Set, Set of 4 Fits 3.9L 4BT Cummins Diesels McBee part number: M-3927154 Picture for representation only. ..

Turbo Oil Inlet Fitting w/2 o-rings for First Gen Cummins.This is for First Generation Cummins trucks that want to install an HX35 turbo in place of t..

94-02 Dodge 5.9L Cummins Diesel Rigid Turbo Drain Tube This is the piece that comes stock on 94-02 Dodge 5.9L Cummins diesel trucks. Cummins: 39..

Includes item #4 in second picture.  Turbo Oil drain tube gasket only. Cummins: 5264569..

Insulation Type: Insulator, keeps heat in Uses: Exhaust Pipe Wrap, Header Wrap, Turbo Manifold Heat Shield ..

Solve that pesky rear freeze plug problem once & for all! Includes plate that bolts in place on the back of the block to hold the freeze plug in, alo..

Set of 6 Cummins part number 4942278 Includes 6 of item number 2 in second picture...

94-98 Dodge 5.9L Cummins Injector Return Fuel Line Cummins: 3926103..

T4-T3 Adapter Flange With T4 sized turbine housings, there is no performance advantage to changing the exhaust manifold to match... So, why go to the..

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. These clamps are smooth on the ins..

1989-2002 5.9L Cummins Diesel Turbo to Manifold T3 Gasket Cummins Part number: 3901356 Picture may not represent actual gasket, it is for illustrati..

This gasket is located in between the turbo exhaust housing and turbo elbow. Number 33 in image ONLY! Cummins: 3535001..

The Aurora 3000 is a quick spooling turbo charger that is great for all around performance on your 94-98 Dodge 5.9L Cummins. The 58mm inducer on the t..

Using this lower connecting rod bearing directly from Cummins will retain factory fit and function. This is an OE replacement and installs directly in..

First generation (1989-1993 Dodge 5.9L VE Cummins) mechanical fuel lift pump. Lift pump only. Don't forget to get gaskets! This pump supplies 3-5PSI ..

Cummins part numbers: Thermostat: 3928499 Seal: 3925466 Seal: 3927305 ..

Includes thermostat only, with seal ring. Image for reference only. Cummins part number: 5292742..

Genuine Cummins 5.9L Engine overhaul kit includes: Pistons Bushing clips Upper engine gasket set Lower engine gasket set Rod bearings ..

2003-2005 Dodge 5.9L Cummins Valve Cover This valve cover DOES NOT have CCV breathers. May fit other applications including some 6.7L Cummins QS..

Cummins front crank main seal. Includes seal driver installation ring. Cummins 3804899..

Includes head gasket only. (Thick, dual hole gasket) Cummins: 3958645..

Includes head gasket only. (Thin, single hole gasket) Cummins: 3958644..

Cummins rocker box bolt set for 03-18 5.9L and 6.7L Cummins applications Includes 3900678 (2) 3903096 (5) Cummins: 2x3900678/5x39..

Using this upper connecting rod bearing directly from Cummins will retain factory fit and function. This is an OE replacement and installs directly in..

Options for standard/upgraded parts are available above Genuine Cummins 5.9L Engine overhaul kit includes: Pistons w/Rings Bushing clip..

Direct fit OEM cummins rocker box for 05-18 Dodge 5.9L And 6.7L Cummins applications Cummins: 3974981..

06-21 Ram Cummins valve cover bolt rubber seal isolator, washer.6 seals required for installation.Part Number: 3973853..

6.7L Cummins Turbocharger VGT Actuator Harness Adapter allows the use of a 13-18 turbo actuator to be used on 07.5-12 Cummins trucks.Cummins: 534..

  03-07 T3 Commonrail CR Cummins Exhaust Manifold The only manifold available to give a substantial  gain in power and fuel economy. ..

  Steed Speed T4I VGT Exhaust Manifold The only manifold available to give a substantial gain in power and fuel economy. Not cheap cast an..

Installing a new exhaust manifold, or simply removing a stock or aftermarket manifold to change gaskets? If so, you'll find that it is a real hassle t..

2003-2007 Dodge 5.9L Common Rail Cummins, 2-Piece Exhaust Manifold, T3, NON-Wastegated, Comes Assembled with Black High Temperature Coating and Pre-T..

ATS Pulse Flow Exhaust Manifold Kit Fits 2003-2007 5.9L Cummins 2-Pc T3 With Gaskets Premium Hardware Since ATS released the first Pulse Flow Manif..

ATS Pulse Flow Exhaust Manifold Kit Fits 2003-2007 5.9L Cummins 2-Pc T3 With Turbo Flange Hardware Since ATS released the first Pulse Flow Manifold..

 BD Power Two Piece Exhaust Manifold - 03-07 Dodge 5.9L Cummins Stop exhaust manifold cracks in their tracks with BD’s new Pulse exhaust manifold for..

2-Piece Exhaust Manifold for 2003-2007 3rd Gen Dodge Cummins Common Rail Does not include turbo to manifold gasket, and you must re-use your stoc..

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold.  The aFe Bladerunner exhaust manifold is constructed out ..

This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. ..

Features: Outflows the factory exhaust manifold by 49%, improving performance and throttle response Cast-in EGR flanges allows retention of factor..

ATS Pulse Flow Exhaust Manifold Kit Fits 2007.5-2018 6.7L Cummins 2-Pc Holset With Multi Layer Gaskets Premium Hardware Since ATS released the firs..

ATS Pulse Flow Exhaust Manifold Kit Fits 2007.5-2018 6.7L Cummins 2-Pc Holset With Turbo Flange Hardware Since ATS released the first Pulse Flow Ma..

The BD-Power Exhaust Manifold is a must have on your 07.5-18 6.7L Cummins. Cast from high-silicon ductile iron this heavy-duty, multi-piece exhaust ma..

Fits: 2013-2018 Ram 3500/4500/5500 6.7L Cummins (Cab & Chassis)This Dorman 674-562 Exhaust Manifold is the perfect component for your 2013-2018 Ra..