-80x80.jpg)
Heavy Duty 300M Dana 80 Axles with Driver Hubs 35 or 37 Spline DRW & SRW
$2,449.00
- Part Number: HMR3xSplineWDhubs
- Est. Ship Time: Contact for Availability
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $357.94
Starting From $43.96
Starting From $416.76
Starting From $253.45
Mag Hytec Dodge Dana 80 Differential CoverMag Hytec Ford Super Duty Dana 80 Differential Cover
Overall height 4 1/8"
1994 to 2002: 2500 5-Speed Tr..
$303.05
Dana 80 Heavy Duty Axles
For Dodge 2500 & 3500 Trucks equipped with the Spicer Dana 80 Axle.
Please select if your truck is a Single rear whee..
$2,449.00
1994-2002 Dodge 2500/3500 5.9L 4WD Dodge Cummins & Gas Powered Trucks BD-Power Adjustable Track Bar Kit with Mounting Bracket With the OEM ball j..
$597.95
Heavy duty 1 piece right front axle replaces the factor 2 piece factor CAD setup (central axle disconnect) & deletes the shift actuator/motor.This is ..
$1,110.09
PLEASE NOTE THAT THERE IS A 4 TO 6 WEEK BUILD TIME FOR THIS PRODUCT!!!Dana 80 SCS Heavy Duty Axles w/Drive Flanges
A must for high horsepower trucks ..
$1,749.00
Discontinued 8/30/24
2000-2002 Dodge 2500/3500 Aluminum CAD 4x4 Shift Fork
OEM aluminum fork without pads
Pads are available under part nu..
$0.00
Stroud NV5600 6 Speed Transmission Bell Housing Blanket
A must for high-rpm sled pullers! As of 3/5/25 this product will now be made with..
$1,250.00
100% locking differential
Legendary traction
Ultimate performance
Fits 3.54 & 4.10 Gear Ratios
Also fits 3.73 thin
The legendary Det..
$1,065.00
Contact to Confirm Availability!
Includes standard thickness AFTERMARKET 12 valve Cummins gasket modified for the use of fire rings.
Requires t..
$267.90
Cummins 12MM Head Stud Bottoming Tap
We recommend you bottom-tap your engine block head-stud threads when installing 12mm ARP or A1 head studs to e..
$26.46
Only Auto Meter has the top quality full coverage "A" pillar gauge mounts for your 1994-1997 Dodge full size truck.
The 17201 mount holds t..
$113.25
Single gasket.
Steel Core or Rubber coated copper available, select option above...
$19.43
Smooth operationPerforms open until neededFully automatic limited slipTrue Trac limited slip for Dana Spicer 60 front with 35 spline axles, 4.10 & Dow..
$805.99
Spicer 1480 Steering Maintenance Free U-Joint
Spicer part numbers: SPL55-3X and or 5-806X, sometimes referred to as E5806X as well.
For ..
$56.45
Heavy duty 1 piece right front axle replaces the factor 2 piece factor CAD setup (central axle disconnect) & deletes the shift actuator/motor.This is ..
$1,110.09
12 Valve or 24 Valve Applications
This is a plate for COMPETITON use and does not include any air intake temperature sensor hole. It can however be..
$226.73
1995-2002 Dodge 2500/3500 Borgeson Steering Shaft Assembly
Full size Dodge Pickups have a type of steering coupler that can show signs of wear in as..
$281.80
Allows for clearance of a roller-lifter setup.
TAPPET COVER, BILLET ALUMINUM
HAVING PROBLEMS KEEPING TAPPET GALLEY SEALED?..
$315.59
Discontinued (Updated 11/11/24)
03-07 Dodge 5.9L 24 Valve Cummins Diesel .093 High Flow Fuel Connector Tubes
Includes new o-rings.
Recommende..
$0.00
DiscontinuedThey are finally here! Full spools for the Dana 80!Easy installation!For 35 or 37 spline axles, select below.Carrier split: 4.10 and up, 3..
$0.00
5-6 Week Lead Time! Contact to Confirm Lead Time.
These Dana 80 spools are turned from 4140 forged steel, splined, heat treated and then finished ..
$625.00
07.5-22 Dodge 6.7L Cummins Diesel New .120 High Flow Fuel Connector Tubes
Includes new o-rings.
Recommended if you have a modified or dual cp3 s..
$357.94
Front core plug plate is for use on a 89-02 block for high performance applications.
Will not work if belt or stock fan hub is being used...
$43.96
High Performance Delivery Valves
Fits P7100 injection pumps found on 94-98 Dodge Cummins and other applications. Custom cut delivery valvesAdditional..
$416.76
5000 RPM Governor Spring Kit (5K GSK)This 5,000 RPM kit utilizes the stock idle (large) spring and will idle at stock levels. We have installed this k..
$253.45
Dodge 5.9L Cummins Diesel Bronze Cam Thrust Plate, also known as a cam retainer (not cam GEAR retainer though)For 89+ 3.9L/5.9L/6.7L Cummins Blocks.Ma..
$93.24
Backordered
Backordered with No ETA (Updated on 3/5/2025)
HMR 12mm Head stud kit for the 94-98 Dodge 5.9L 12 Valve Cummins Turbo Diesel
These s..
$486.62
Contact to Confirm Availability!
Includes standard thickness AFTERMARKET 12 valve Cummins gasket modified for the use of fire rings.
Requires t..
$267.90
This includes:
Overflow valve banjo bolt adapter
Braided Line Adapter
Braided Line (runs from Ppump return to factory tee location)
Tee Fi..
$122.21
Includes standard thickness multi-layer steel 6.7L Cummins gasket modified for the use of fire rings.
Requires the machining of grooves into the cy..
$333.84
Set of 6 Rocker Arm Studs 1989-1998 Dodge Cummins Diesel
Torque these to 27 Ft/Lbs.
Please allow 1-2 days for shipping.
Part #12..
$78.36
This is the oil feed line you will need if you have a VP44 truck and are installing a P7100 Injection pump.
This line re-locates the oil feed into th..
$183.98
Includes standard thickness 24 valve AFTERMARKET head gasket modified for the use of fire rings.
This kit will also work on 2003-2007 Dodge 5.9L Cu..
$255.00
OEM Forged Cummins Rods, fits 89-2007 5.9L Cummins (exchange basis)
NOT CRACKED CAP RODS
Heat Treated
Stress Relieved
Machined
I..
$1,650.00
For Engine Drop Down: 03-07 CR and 6.7CR on Backorder with No ETA
For Main Stud Size Drop Down: Both on Backorder with No ETA (Updated on 6/1..
$483.82
Set of 12 Rocker Arm Studs 98.5+ Dodge 5.9L & 6.7L Cummins Diesel
Torque these to 27 Ft/Lbs.
Washers are NOT Included in this Kit
Pleas..
$151.99
Fits: 1994-1999 Dodge Cummins 2500/3500 (With 30-Spline Axles)
This kit eliminates the vacuum disconnect and replaces the two piece axle with a one..
$514.89
Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High q..
$868.89
Dodge 2500 3500 Dana 60 35 Spline Upgrade One Piece Axle Kit (CAD Delete) Tired of snapping the little collar that locks your two axles together in th..
$574.69
Included in the kit is a new Chromoly axle that gets rid of the 2 part setup, a new axle seal, block off plate, and new gasket.
You can use this kit ..
$368.43
PLEASE NOTE THAT THERE IS A 4 TO 6 WEEK BUILD TIME FOR THIS PRODUCT!!!Dana 80 SCS Heavy Duty Axles w/Drive Flanges
A must for high horsepower trucks ..
$1,749.00
ARP Heavy Duty Axle Bolts & Nuts
Kit Includes:
16 Studs
16 Nuts (12 Point, Black Oxide)
Nuts and Studs also sold individually.
Man..
$166.34
Extreme Duty Kit 35 Spline Outers
For 94-99 Dodge Ram 2500/3500 single wheel trucks only.Dually owners will need to order a dually adapter kit from A..
$2,665.28
94-00 Dodge Dana 60 Front CAD Disconnect Fork
If you have a 2000 truck please verify that your truck needs the SMALLER style fork.
Spi..
$16.38
Included in the kit is a new Chromoly axle that gets rid of the 2 part setup, a new axle seal, block off plate, and new gasket.
The axle seal in th..
$380.00
Included in the kit are 2 new Chromoly axles that get rid of the 2 part setup, a new axle seal, block off the plate, and new gasket.
You can use th..
$1,113.33
Included in the kit is 1 new Chromoly axle that gets rid of the 2 part setup, a new axle seal, block off the plate, and new gasket.
You can use thi..
$573.33
Backordered
Backordered with No ETA (Updated on 4/30/2025)
2000-20002 Dodge 2500/3500 Dana 60 Axle Shaft Drivers Side Inner
32 ..
$204.49
00-02 Dodge Dana 60 Passenger Side Innermost Axle Shaft
This axle runs from the axle disconnect to the differential.
Spicer Part number: 49490
..
$120.28
94-99 Dodge 2500/3500 Dana 60 Axle Shaft Drivers Side Inner
30 Spline
Part number: Spicer 75594X
Image for rep..
$149.95
85-99 Dodge Dana 44/60 Front CAD Disconnect Collar
CAD (central axle disconnect) disconnect collar that connects the axle shafts on the passenger s..
$49.40