PowerFlo Lift Pump | 2014-2019 Ram 1500 EcoDiesel

14-19 Ram 3.0L EcoDiesel Fleece PowerFlo Lift Pump

Fleece PowerFlo Lift Pump FPE-PF-RAM-ECO-1419 - 2014-2019 Ram 1500 EcoDiesel

$799.00

Part Number: FPE-PF-RAM-ECO-1419
Est. Ship Time: Usually Ships By Next Business Day

Fleece Performance

Qty

Add to Cart

Ask Question

Add to Wish List

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating

Based on 0 reviews. - Write a review

The Fleece Performance PowerFlo Lift Pump FPE-PF-RAM-ECO-1419 is a direct in-tank replacement and upgrade for the 2014-2019 Ram 1500 3.0L EcoDiesel. It replaces OE part numbers 68161407AB and 68161407AE with a dual gerotor design that increases flow capacity over the factory pump - with no cutting, splicing, or modification to existing fuel lines, harness, or fuel tank required. The kit includes the pump assembly, a chassis wiring extension harness, and a fuel sending unit tank O-ring.

Buy this if...

Your truck is a 2014-2019 Ram 1500 with the 3.0L EcoDiesel and you need to replace a failing factory lift pump or want more flow capacity than the stock unit provides.
You want a drop-in replacement that retains all factory fuel lines, factory diagnostic functionality, and installs without tank modifications.
You want the included wiring harness extension and O-ring in the box so you are not sourcing hardware separately.

Do not choose this if...

Your truck is a Ram 2500 or 3500 with a Cummins engine - those applications use a different PowerFlo. See the correct year-specific Cummins pump for your truck.
Your goal is strictly factory-spec restoration with no added flow headroom - a standard OEM-style replacement may be sufficient for a completely stock build.

Verify before ordering...

Confirm your truck is a 2014-2019 Ram 1500 with the 3.0L EcoDiesel - not a gas engine Ram 1500 and not a Cummins-powered truck.
Confirm your current OE pump number is 68161407AB or 68161407AE if cross-referencing before ordering.

Why This Pump Makes Sense for the 3.0L EcoDiesel

The factory in-tank lift pump on the Ram 1500 EcoDiesel was sized for stock fuel demand. The PowerFlo replaces it with a dual gerotor design - two ultra-quiet gerotor pumps in the same housing - that raises the flow ceiling while operating at the correct 68-70 psi idle pressure for the EcoDiesel system.

Where other high-flow lift pump conversions require tank sumps, draw straws, or additional air filtration hardware, the PowerFlo's active fill bucket handles the fuel pickup geometry internally. This eliminates the quarter-tank fuel starvation problem without any modifications to the tank, fuel lines, or wiring harness. Factory diagnostic functionality is fully retained.

Stay with a standard OEM-style replacement if your Ram 1500 EcoDiesel is stock and your only goal is restoring factory-level lift pump function. The PowerFlo earns its place when you want increased flow capacity and a more durable pump in the same drop-in package.

What Comes in the Kit

This is a complete kit - not just the pump assembly. The box includes everything needed for a clean install:

PowerFlo lift pump with integral fuel level sender
Chassis wiring extension harness
Fuel sending unit tank O-ring

The integral fuel level sender means your factory gauge reads correctly after install. The included wiring extension and O-ring mean you are not sourcing those separately before you can complete the job.

Fitment Coverage

2014 Ram 1500 - 3.0L EcoDiesel
2015 Ram 1500 - 3.0L EcoDiesel
2016 Ram 1500 - 3.0L EcoDiesel
2017 Ram 1500 - 3.0L EcoDiesel
2018 Ram 1500 - 3.0L EcoDiesel
2019 Ram 1500 - 3.0L EcoDiesel

3.0L EcoDiesel engine only. This pump does not fit Ram 1500 gas engine applications or any Ram 2500/3500 Cummins platform.

Key Specs

Spec	Detail
Part Number	FPE-PF-RAM-ECO-1419
Application	2014-2019 Ram 1500 3.0L EcoDiesel
Pump Design	Dual ultra-quiet gerotor
Operating Pressure	68-70 psi at idle
Outlet/Return Thread	3/4"-16 thread (-8 O-ring fitting)
Fuel Line Modification	None required - retains all factory lines
Biodiesel Compatibility	Validated up to B20 (20% biodiesel)
Included Items	Pump with integral sender, wiring extension harness, tank O-ring
OE Numbers Replaced	68161407AB, 68161407AE
Warranty	Lifetime Limited Parts Warranty

Avoid These Common Mistakes

Ordering for a Cummins-powered Ram:
The EcoDiesel is a 3.0L V6 diesel - a completely different platform from the 5.9L or 6.7L Cummins found in Ram 2500 and 3500 trucks. The pump modules, operating pressures, and housing configurations are not interchangeable. If your truck is a Ram 2500 or 3500, use the correct year-specific Cummins PowerFlo instead.

Do not order this pump for a Ram 1500 with a gas engine. This pump is EcoDiesel 3.0L only.
Do not order for a 2020 or newer Ram 1500 EcoDiesel - the 2019 model year is the last year covered by this part number. Verify fitment for 2020+ applications before ordering.
Note that the EcoDiesel operating pressure (68-70 psi at idle) is significantly higher than the Cummins PowerFlo (18-20 psi). These pumps are not interchangeable between platforms.

Cross Reference Part Numbers

FPE-PF-RAM-ECO-1419 replaces these OE part numbers for 2014-2019 Ram 1500 EcoDiesel applications:

68161407AB 68161407AE

Installation Instructions

Download installation instructions

Before You Order

Truck confirmed as 2014-2019 Ram 1500 with the 3.0L EcoDiesel engine
Not a Ram 2500/3500 or Ram 1500 gas engine application
OE pump number 68161407AB or 68161407AE verified if cross-referencing

For a 2014-2019 Ram 1500 EcoDiesel owner who needs a more capable lift pump without modifying a single factory connection, FPE-PF-RAM-ECO-1419 is the correct drop-in upgrade.

Frequently Asked Questions

Click or tap a question below to expand the answer.

Will this fit my 2020 or newer Ram 1500 EcoDiesel?

No - this part number covers 2014-2019 only. The 2019 model year is the last year in the application range. If your truck is a 2020 or newer Ram 1500 EcoDiesel, verify the correct pump part number with Fleece Performance before ordering.

Does this kit include everything I need for the install?

The kit includes the PowerFlo pump assembly with integral fuel level sender, a chassis wiring extension harness, and a fuel sending unit tank O-ring. No cutting, splicing, or modification to your factory fuel lines, wiring harness, or fuel tank is required. Factory diagnostic functionality is fully retained after install.

Is this the same pump as the Cummins PowerFlo for Ram 2500/3500 trucks?

No. The EcoDiesel PowerFlo is a completely separate product built for the 3.0L V6 EcoDiesel platform. It operates at 68-70 psi at idle - compared to 18-20 psi for the Cummins PowerFlo. The housing, module configuration, and operating pressure are different. These pumps are not interchangeable between platforms.

Will my factory fuel gauge still read correctly after installing this pump?

Yes. The PowerFlo includes an integral fuel level sender, so your factory fuel gauge continues to read correctly after install. Factory diagnostic functionality is also fully retained - no warning lights or sensor issues from the pump swap.

Can I run aftermarket fuel lines with this pump?

Yes. The pump outlet and return are threaded to accept a -8 O-ring fitting (3/4"-16 thread), giving you the option to run your own fuel lines if your setup calls for it. This is optional - the pump installs with full factory line retention by default.

What OE part numbers does FPE-PF-RAM-ECO-1419 replace?

FPE-PF-RAM-ECO-1419 replaces OE part numbers 68161407AB and 68161407AE. If your current pump carries either of these numbers, this is the correct PowerFlo replacement for your 2014-2019 Ram 1500 EcoDiesel.