Shop By Category
Your Cart

98.5-02 Dodge 5.9L Cummins Pusher 3" Intake System w/Cross-Air

98.5-02 Dodge 5.9L Cummins Pusher 3" Intake System w/Cross-Air
98.5-02 Dodge 5.9L Cummins Pusher 3" Intake System w/Cross-Air

Available Options

$449.99

  • Part Number: PDC9802CAK
  • Est. Ship Time: Some Built On Demand Contact to Confirm

This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifold and the air starvation of the rear cylinders.

The Cross-Air adapts to an existing port at the rear of the intake plenum that is normally sealed off with a freeze plug style fitting from the factory. By splitting off the driver-side charge tube and creating another parallel path to that port, cylinders 5, and 6 can be better supplied with air. This helps balance the engine temperatures and load at each cylinder greatly. This entire package is fully TIG welded mandrel bent tubing, with a laser cut 1/2" flange and 1/4" dipstick mount. The intake manifold is standard equipped with two 1/8 inch NPT ports on the back for methanol/water injection, a boost gauge, etc. This is a complete kit that includes instructions, a machined cylinder head adapter, heavy duty 4-ply silicone couplers, stainless T-bolt clamps, a OEM gasket and hardware, and 1/8 inch port plugs for a quality install. For an additional charge, select powdercoating colors are available on this kit.


Features:

  • Increases Engine Efficiency
  • Increased Throttle Response
  • Equalized Airflow To Cylinders 5 & 6


Pusher part number: PDC9802CAK

WRITE A REVIEW

 

Please login or register to review

 
Lame California Prop 65 Notice