Pure Diesel Power, your number 1 diesel performance parts source!

Pure Diesel Power Price Match

live chat service provider

PDP Phone Number

PDP Email Signup

Shop By Brands all1-9ABCDEFGHIJKLMNOPQRSTUVWXYZ

Free shipping on all orders over $150! Free Shipping on orders over $150! *Exclusions Apply

Differential Covers

Front and Rear Differential Covers

AFE, Mag Hytec, & Oasis Differential Covers for Dodge Trucks.
We offer covers to fit the Dana 60, Dana 70, Dana 80, AAM 9.25, AAM 10.5, & the AAM 11.5 found on Dodge 1500/2500 & 3500 Ram trucks.

Heavy Duty PPE Differential Cover cast from A356-T6 aluminum alloy. Cast aluminum finish and greater surface area optimize heat transfer. Prolongs life of...


From Mopar Mopar

OEM differential cover gasket for the AAM 9.25 front axle found in 2003+ Dodge Ram 2500 & 3500 trucks. Mopar: 5086682AA

+

From AFE AFE

aFe Power's new rear differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed out of durable die-cast A380 aluminum with reinforced ribs and wrinkle black powder-coating with machined fins for maximum strength and styling. This cover comes with all necessary hardware and includes an O-ring for a leak-free seal. This cover fits the AA14-10.5 axles, see comparison photo below for verification.

5 quart lube capacity:

This cover has about a 5 quart lube capacity at the factory line, factory cover holds about 4 quarts.

Built-in Internal/external Fins:
Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling.

Magnetic drain/fill plug:
This system incorporates a large magnetic drain and fill plug that captures loose particles for maximum rear-end protection.

Oil Level Sight Glass:
Pre-installed large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling.


When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

+

ATS Protector Rear Differential Cover Kit- 14-Bolt, 11.5" Ring Gear American Axle Fits: *GM 2001+ 2500HD & 3500 w/ Full Floating Axle (All Duramax...

+

From AFE AFE

aFe Power's new front-end differential cover brings performance engineering to the protection of your truck's front-end. This differential cover has a 3-1/2 quart lube capacity (factory cover holds 2-1/2 quarts) at the factory fluid level line, a magnetic drain plug and a magnetic fill plug to remove unwanted debris.

Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. aFe has also designed a large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling. This differential cover is constructed out of durable die-cast A380 aluminum with reinforced ribs and a wrinkle black powder-coating for maximum strength and style.

This cover fits the AA14-9.25 axles.

This cover uses Dodge Gasket P/N: 5086682AA not included.

Gasket is available as aFe P/N: 46-70045.


When it comes to engineering for power, performance, protection and value,  aFe Power is the only choice.

+

This is one of those things that you have to have if you're going off road. The OEM front differential cover is soft steel and the lip is vulnerable to...

+

This new front differential cover for the 2003-2014 Ram 2500 is cast in the USA from high-quality aluminum and holds an extra 1.6 quarts of oil for a bit of...

+

This new front differential cover for the 2003-2014 Ram 2500 is cast in the USA from high-quality aluminum and holds an extra 1.6 quarts of oil for a bit of...

+

This new front differential cover for the 2003-2014 Ram 2500 is cast in the USA from high-quality aluminum and holds an extra 1.6 quarts of oil for a bit of...

+

From AFE AFE

aFe Power's new rear differential cover brings performance engineering to the protection of your  trucks rear-end.  This differential cover has a 5 quart lube capacity (factory cover holds 4 quarts) , a magnetic drain plug, a magnetic tipped fill plug for maximum rear-end protection.  Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling.  aFe has also designed a large oil level site glass  with calibration plug set to the factory fluid level to eliminate overfilling.   This differential cover is constructed out of durable die-cast A380-T6 aluminum with reinforced ribs and a wrinkle black powder coating with machined fins for maximum strength and styling.  This differential cover fits AA-14-11.5 Axles.

When it comes to engineering for power, performance, protection and value,  aFe Power is the only choice.

This item fits 01-2010 Chevy/GM 2500 & 3500 trucks equipped with the Duramax diesel and 03-2010 Dodge Ram 2500/3500 trucks equipped with the Cummins Diesel.

This differential cover does not require any gasket, it has an o-ring in the cover sealing surface for an easy installation. 

AFE: 46-70012

+

From AFE AFE

aFe Power's new rear differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed...

+

From Mopar Mopar

Mopar differential cover gasket. Will NOT work on 2003 trucks with automatic transmissions. Mopar part number: 5086905AA

+

From Mopar Mopar

This is a OE Mopar replacement differential cover. Comes with cover gasket. Mopar part number: 68149259AD Cross reference numbers: AAM #:...

+

From BD Power BD Power

BD's Cast to Cool Differential Cover is engineered to keep oil on the gears, with an extra capacity sump located at bottom to help the gears to pick up...

+

From PML Inc. PML Inc.

Heavy Duty Application With a Low Profile for Maximum Clearance Around Steering, U-Bolts, and Suspension. Capacity Change: 4oz Approximate Increase...


From Mag Hytec Mag Hytec

Overall height 3 5/8"

Dodge Front '89 to '02 2500 & 3500 Models

2002 Models need to check for Vent tube on face of cover

If you have a Vented cover just make note in comment section for correct cover.

Capacity: 4 1/2 Quarts

Includes: Bolt kit, Drain Plug and Dip Stick.


Mag Hytec Part Number: DANA #60DF


From AFE AFE

Features: Constructed out of durable, die-cast A380 aluminum Neodymium magnetic drain plug is used for maximum gear protection A 1/8" NPT...

+

From AFE AFE

aFe Power's new rear differential cover brings performance engineering to the protection of your  truck's rear-end. This differential cover has a 5 quart lube capacity (factory cover holds 4 quarts) at the factory line, a magnetic drain plug, a magnetic tipped fill plug for maximum protection. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling.  aFe has also designed a large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling. This differential cover is constructed out of durable die-cast A380 aluminum with reinforced ribs and a wrinkle black powder coating for maximum strength and styling. This cover fits the Dana #80 axles. This cover uses an O-ring for a leak-free seal. When it comes to engineering for power, performance, protection and value,  aFe Power is the only choice.

Note: This cover also fits 1999-2007 Ford F-350/F-450 Power Stroke dually trucks.

 

+

This is one of those things that you have to have if you're going off road. The OEM front differential cover is soft steel and the lip is vulnerable to...

+

From AFE AFE

Features: Constructed out of durable A356 cast aluminum Reinforced ribs and wrinkle black powder-coating with machined fins Magnetic drain and...

+

From AFE AFE

Features: Constructed out of durable A356 cast aluminum Reinforced ribs with a raw finish with machined fins Magnetic drain plug that captures...

+

  • Strengthens rear end housing
  • Reduces Housing Spreading
  • Snubber bolts press against bearing caps
  • Large oil fill allows for gear inspection without complete cover removal.
Designed for competition and off-road recovery applications only, not intended for use on public roads.

+

Dodge AAM 11.5RG 14 Bolt Differential Cover, Grille Style

Fits rear differential on some 2003 & Newer 2500 & 3500 Dodge Ram Trucks

* Low pressure casting (today’s technology)

* Heavy Duty Covers
* Longer life of your vehicle
* Larger oil capacity
* Increased lubrication
* Runs cooler
* Oil changes without removing the cover
* Made in the USA!

Oasis Differential Covers (ODC) provide your hard working service and/or recreational vehicle with increased lubrication and cooling capacity. Oasis Differential Covers set your vehicle apart both functionally and aesthetically.
ODC has become the leader in FUNCTIONAL designer covers, Cast in A356 aluminum heat treated to T6 – aircraft quality standards.
Oasis Differential Covers gives increased oil capacity and allows for oil changes to be made without removing the cover. Magnetic drain plugs are provided to catch worn gear materials, which enables fluid to keep its integrity, hardware is also provided so installation can be done worry free.
All Oasis Differential Covers are covered by a limited Lifetime Warranty.
Show Off your rear end with an Oasis Differential Cover.

Polished covers add an additional $26 to the price, select below.


Dodge AAM 11.5RG 14 Bolt Differential Cover w/Maltese Cross

Fits rear differential on some 2003 & Newer 2500 & 3500 Dodge Ram Trucks

 

* Low pressure casting (today’s technology)
* Heavy Duty Covers
* Longer life of your vehicle
* Larger oil capacity
* Increased lubrication
* Runs cooler
* Oil changes without removing the cover
* Made in the USA!

 

Oasis Differential Covers (ODC) provide your hard working service and/or recreational vehicle with increased lubrication and cooling capacity. Oasis Differential Covers set your vehicle apart both functionally and aesthetically.
ODC has become the leader in FUNCTIONAL designer covers, Cast in A356 aluminum heat treated to T6 – aircraft quality standards.
Oasis Differential Covers gives increased oil capacity and allows for oil changes to be made without removing the cover. Magnetic drain plugs are provided to catch worn gear materials, which enables fluid to keep its integrity, hardware is also provided so installation can be done worry free.
All Oasis Differential Covers are covered by a limited Lifetime Warranty.
Show Off your rear end with an Oasis Differential Cover.


Dodge AAM 10.25RG 14 Bolt Differential Cover Painted

Fits rear differential on some 2003+ Dodge Ram 2500 & 3500 Trucks

Now also available in POLISHED.

* Low pressure casting (today’s technology)
* Heavy Duty Covers
* Longer life of your vehicle
* Larger oil capacity
* Increased lubrication
* Runs cooler
* Oil changes without removing the cover
* Made in the USA!

Oasis Differential Covers (ODC) provide your hard working service and/or recreational vehicle with increased lubrication and cooling capacity. Oasis Differential Covers set your vehicle apart both functionally and aesthetically.
ODC has become the leader in FUNCTIONAL designer covers, Cast in A356 aluminum heat treated to T6 – aircraft quality standards.
Oasis Differential Covers gives increased oil capacity and allows for oil changes to be made without removing the cover. Magnetic drain plugs are provided to catch worn gear materials, which enables fluid to keep its integrity, hardware is also provided so installation can be done worry free.
All Oasis Differential Covers are covered by a limited Lifetime Warranty.
Show Off your rear end with an Oasis Differential Cover.


From PML Inc. PML Inc.

This American Axle differential is found on 2003 and newer Dodge Ram 2500, 3500 and 1500 Mega Cab trucks. The PML cover is larger than the stock cover so...


Dodge AAM 9.25RG 12 Bolt Differential Cover Painted

Fits rear differential on some 1974-2006 Dodge Ram 1500, Some Durango & Dakota, 1/2 & 3/4 Ton Trucks

Now also available in POLISHED.

* Low pressure casting (today’s technology)
* Heavy Duty Covers
* Longer life of your vehicle
* Larger oil capacity
* Increased lubrication
* Runs cooler
* Oil changes without removing the cover
* Made in the USA!

Oasis Differential Covers (ODC) provide your hard working service and/or recreational vehicle with increased lubrication and cooling capacity. Oasis Differential Covers set your vehicle apart both functionally and aesthetically.
ODC has become the leader in FUNCTIONAL designer covers, Cast in A356 aluminum heat treated to T6 – aircraft quality standards.
Oasis Differential Covers gives increased oil capacity and allows for oil changes to be made without removing the cover. Magnetic drain plugs are provided to catch worn gear materials, which enables fluid to keep its integrity, hardware is also provided so installation can be done worry free.
All Oasis Differential Covers are covered by a limited Lifetime Warranty.
Show Off your rear end with an Oasis Differential Cover.


From PML Inc. PML Inc.

This American Axle rear end differential cover fits some 2003 and newer Dodge Ram 2500 and 3500. These models may have a 10.5-inch or an 11.5-inch ring gear. (See our AAM 11.5, 14 Bolt for Dodge differential cover if you have an 11.5-inch ring gear.) Check the identification sticker in your glove box or on your driver's door to determine which differential you have.

This cover has oil fill, level check, and drain holes to make it easy to follow the 15K oil change interval that Dodge specifies for the AAM axles used in 2003 and newer Ram 2500 & 3500 trucks.

This diff cover also has an undrilled boss for a temperature sensor. Please call to order if you would like the boss drilled and tapped.

 SHIPS WITHIN 1 TO 2 BUSINESS DAYS!

PML Differential Cover Features:

  • Increased oil capacity for cooler temperatures, 0.8 qt. over stock
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to differential housing
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal using RTV or factory reusable gasket
  • Oil changes without removing the cover
  • All hardware provided, including magnetic drain plug
  • MADE IN THE USA!!

 PML Inc. :10302


From PML Inc. PML Inc.

This American Axle rear end differential cover fits some 2003 and newer Dodge Ram 2500 and 3500 and it fits GM trucks Silverado and Sierra 2500HD & 3500 with the Duramax or 8.1 engine.

The Dodge Ram 2500 and Ram 2500 may have a 10.5-inch or an 11.5-inch ring gear. You might have an identification sticker in your glove box or on your driver's door that states which differential you have.

This diff cover has oil fill, level check, and drain holes to make it easy to follow the 15K oil change interval that Dodge specifies for the AAM axles used in 2003 and newer Ram 2500 & 3500 trucks.

This cover also has an undrilled boss for a temperature sensor. Please call to order if you would like the boss drilled and tapped.

  SHIPS WITHIN 1 TO 2 BUSINESS DAYS!

PML Differential Cover Features:

  • Increased oil capacity for cooler temperatures, 0.75 qt. over stock
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to differential housing
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal using RTV or factory reusable gasket
  • Oil changes without removing the cover
  • All hardware provided, including magnetic drain plug
  • MADE IN THE USA!!

 PML Inc. :10361


From PML Inc. PML Inc.

This PML Dana 50/60 front end cover is designed for older Ford Super Duty trucks. This cover clears the ring gear and the steering linkage on most older Ford truck applications. Possible applications for this cover include:

  • Dodge 1 ton trucks, 1975 to 1999
  • Ford F–350 trucks and F–250, 1966 to about 1997
  • Ford Excursion and , F–450, F–550, 1999 and newer
  • GM 1 ton trucks, 1973 to 1991
  • Jeep and truck custom Dana 60 rear or front applications

If your stock cover has a vent fitting (instead of having a vent on the differential housing), this differential cover cannot be used. The vent is common on Dodge trucks.

Configurations vary so please check carefully. Some F–250 trucks have independent front suspension and cannot use this cover. Some Dodge Ram 2500 and 3500 trucks can have a trackbar and do not have clearance for a larger cover. Be sure to check for clearance with the steering all the way at stops.

This differential cover has drain and fill/level check holes.

 SHIPS WITHIN 1 TO 2 BUSINESS DAYS!

PML Differential Cover Features:

  • Increased oil capacity for cooler temperatures, app. 0.5 qt. over stock
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to differential housing
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal using RTV or factory reusable gasket
  • Oil changes without removing the cover
  • All hardware provided, including magnetic drain plug
  • MADE IN THE USA!!

 PML Inc. :6063


From PML Inc. PML Inc.

The PML Dana 50/60 front differential cover fits 1999 and newer Super Duty Fords and some 1994–2002 Dodge Ram 2500 and 3500 vehicles. The fin pattern matches our rear covers for Dana 80 and Ford Sterling axles.

On Ford F–250 and F–350 trucks, this front end differential cover is slightly deeper than the stock covers for added fluid capacity.

For Dodge Ram 2500 and 3500 vehicles, please check the cover dimensions and look at your trackbar bracket before ordering. Also, if your stock cover has a vent fitting (instead of having a vent on the differential housing), this differential cover cannot be used.

This part is shallower than our straight fin Dana 50/60 front cover for more steering linkage clearance.

For 1997 and older Ford F250/350 trucks, this part will not clear the ring gear. Our straight fin Dana 50, 60 front cover will clear the ring gear. Always check yoru vehicle before ordering.

This diff cover has drain and fill/level check holes.

 SHIPS WITHIN 1 TO 2 BUSINESS DAYS!

PML Differential Cover Features:

  • Increased oil capacity for cooler temperatures, app. 0.5 qt. over stock
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to differential housing
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal using RTV or factory reusable gasket
  • Oil changes without removing the cover
  • All hardware provided, including magnetic drain plug
  • MADE IN THE USA!!

 PML Inc. :10737


From PML Inc. PML Inc.

This Dana differential cover fits the rear end on applicable Dodge, Ford and GM trucks and vans. The ring gear varies with application (commonly 9.75 or 10.5 inches).

Some popular rear end applications for this Dana 60, 70 differential cover are:

  • 1988-1993 Dodge Ram 250 & 350
  • 1994-2002 Dodge Ram 2500 with automatic transmission
  • Ford E250 & E350 vans 

This cover can be machined for a temperature sending unit. The hole for this goes in the face of the differential cover. So the temperature sending unit probe would be perpendicular to the face. This optional machining must be ordered over the phone. A plug is included for the hole is included.

 SHIPS WITHIN 1 TO 2 BUSINESS DAYS!

PML Differential Cover Features:

  • Increased oil capacity for cooler temperatures, app. 0.8 qt. over stock
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to differential housing
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal using RTV or factory reusable gasket
  • Oil changes without removing the cover
  • All hardware provided, including magnetic drain plug
  • MADE IN THE USA!!

 PML Inc. :9426


From PML Inc. PML Inc.

This differential cover fits Dana 80 differential commonly found on the rear of Dodge and Ford trucks and vans. Some popular rear end applications for the Dana 80 differential are:

  • 1994-2002 Dodge Ram 2500, V10 or diesel with manual transmission and hybrid Dana 70, 80 differential (trucks with the automatic transmission, please see the Dana 60/70 cover)
  • 1994-2002 Dodge Ram 3500
  • 1989-1997 Ford F350 Dually
  • 1999 and newer Ford F350 Dually
 SHIPS WITHIN 1 TO 2 BUSINESS DAYS!

PML Differential Cover Features:

  • Increased oil capacity for cooler temperatures, app. 0.8 qt. over stock
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to differential housing
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal using RTV or factory reusable gasket
  • Oil changes without removing the cover
  • All hardware provided, including magnetic drain plug
  • MADE IN THE USA!!

 PML Inc. :9520


Help keep your rear axle running cool and clean with an upgraded differential cover from PPE. Made in the USA from high-quality cast aluminum for strength...


ODC6070X-SPICER DANA 60/D60 DIFFERENTIAL
-Fitments for 2500 1963-2002 (Rear), 2500 1980-2002 (Front), 2500 1985-2001 (Front), 3500 1983-2001 (Front), 3500 1976-2001 (Front), Ram SRT-10 2004-2006 (Rear), 2500 1969-1974 (Rear), 3500 1967-1992 (Front)

* Low pressure casting (today’s technology)
* Heavy Duty Covers
* Longer life of your vehicle
* Larger oil capacity
* Increased lubrication
* Runs cooler
* Oil changes without removing the cover
* Made in the USA!

 

Oasis Differential Covers (ODC) provide your hard working service and/or recreational vehicle with increased lubrication and cooling capacity. Oasis Differential Covers set your vehicle apart both functionally and aesthetically.
ODC has become the leader in FUNCTIONAL designer covers, Cast in A356 aluminum heat treated to T6 – aircraft quality standards.
Oasis Differential Covers gives increased oil capacity and allows for oil changes to be made without removing the cover. Magnetic drain plugs are provided to catch worn gear materials, which enables fluid to keep its integrity, hardware is also provided so installation can be done worry free.
All Oasis Differential Covers are covered by a limited Lifetime Warranty.
Show Off your rear end with an Oasis Differential Cover.

Available in black (above), natural (below) and polished (not shown). Natural is standard price, painted and polished covers add additional charge.


From Mag Hytec Mag Hytec

Mag Hytec AAM 10.5" 14 Bolt Dodge Rear Differential Cover

Dodge Rear 2003 & Up Dodge 2500  Automatic Gasoline Powered Trucks.

6 Quart Capacity

Please verify 100% that you have the 10.5 rear axle before ordering.

Bolt Pattern has two top and bottom bolts @ 11:00 & 1:00 O'clock & 7:00 & 5:00 O'clock for quick identification.

OR #AA 14-11.5 Bolt Pattern has one top and one bottom bolt @ 12:00 O'clock & 6:00 O'clock for quick identification.

 

+

From Mag Hytec Mag Hytec

Mag Hytec AA 11.5" 14 Bolt Dodge Rear Differential Cover

Dodge Rear 2003 & Up 2500 & 3500 Automatic & Standard Diesel

High Output Diesels 2500 & 3500 trucks

8 Quart Capacity

Please verify 100% that you have the 11.5 rear axle before ordering.

Overall Height Is 3 5/8"

Finned aircraft aluminum housing for improved cooling

Offers easy routine maintenance without removing the differential cover

Dipstick with magnetic insert

Mag-Hytec’s heavy duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function – cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec – when you’re pulling a heavy load. 

+

From Mag Hytec Mag Hytec

Mag Hytec AAM 9.25" 14 Bolt Dodge Front Differential Cover

Dodge Front 2003 & Up 2500 & 3500 Automatic & Standard Diesel

Overall height 3 5/8"

Standard Diesel and High Output / Gas Engines

*Lube Locker Custom Made Reusable Gasket

Includes Bolt kit, Drain Plug and Dip Stick

4 Quarts total capacity.

A word of caution: This cover works perfectly on 90% of Dodge Trucks. Due to stack tolerances differing from one truck to the next, some modification could be required to clear all steering components. Be extra attentive to fitment  and clearance prior to install.

 


From Mag Hytec Mag Hytec

Mag Hytec AAM 9.25" 14 Bolt Dodge Front Differential Cover Dodge Ram Front: 2003-2013 2500 Automatic & Standard Diesel 2003-2012 Dodge Ram 3500...

+

From Mag Hytec Mag Hytec

Mag Hytec Dodge Dana 80 Differential Cover

  • 1994 to 2002: 2500 5-Speed Trucks
  • 1994 to 2002: 3500 - ALL TRUCKS

+

From Mag Hytec Mag Hytec

Mag Hytec Dodge Dana 70 Differential Cover

  • 1994 to 2002: 2500 Automatic Diesel Trucks

+

From Mag Hytec Mag Hytec

Dodge #12-9.25     Overall height 3 3/8" Vans, Ram 1500, EcoDiesel, Durango and some Dakotas Includes: Bolt kit, Drain Plug...

+

11.5" Differential Cover Fits Chevy/GM & Dodge along with the AAM 11.8.  Specs: Bolt: 14-Bolt Material: Aluminum Size: 11.5" Ring...

+
Up