-80x80.jpg)
Custom High Flow Intake Plenums and Intake Plates for the 5.9L Cummins Diesel by Pure Diesel Power, Hellman, and ZZ Fab. These custom make plenums are specially designed to increase air flow and distribute it evenly to all cylinders for high performance and high horsepower Cummins applications.
Brand: Pure Diesel Power
Part Number: PDPINTMANI-12V
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is included.
Outflows Competitors
Competitively-Priced
Stainless Steel Construction
We're not joking around anymore, not even "just k..
$950.00
Brand: Pure Diesel Power
Part Number: PDPINTMANI-PPUMP24V
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is included.
Outflows Competitors
Competitively-Priced
Stainless Steel Construction
Actual Sized Runners
We're not joking around anymore,..
$849.00
Brand: D&J Precision Machine
Part Number: DJPCNC100006x
Billet Stage 2 Intake Manifold: Upgrade to D&J's Billet Stage 2 Intake Manifold for a reliable and performance-oriented solution for your 5.9 or 6.7 Cummins engine. D&J Precision Machine is the gold standard in the Cummins performance industry.
The Billet Stage 2 Intake Manifold is s..
$1,049.99
Brand: Pure Diesel Power
Part Number: PDPINTMANI-03UP
Custom Side Draft Intake Manifold Plenum for the 03-18 Cummins 5.9L or 6.7L
Features:
Equal Air Distribution
Outflows Competitors
Competitively-Priced
Stainless Steel Construction
Thicker Top Plate to reinforce CP3 Bracket
We're not joking around anymore, not eve..
$849.00
Brand: Glacier Diesel Power
Part Number: 0307-ABIP
'03-'07 5.9L "Air-Boss CR" Intake Plenum Cover & Grid Heater Delete Kit EGT's running too high? Can't use all of the fuel you have available? The GDP Air-Boss intake plate gives the largest flow increase possible short of milling the cast plenum off the head and installing a fabricated intake p..
$349.99
Brand: Pusher
Part Number: PDC0718HGD
The Pusher Heater Grid Delete replaces the restrictive factory heater grid with a fully CNC machined 6061-T6 aluminum plenum cover. Finished in bright silver or titanium anodize ensures this part will remain beautiful through years of use and abuse. This part supplies more air to all cylinders via a..
$209.99
Brand: S&B Filters
Part Number: 76-1005
For those living in warm climates where cold starts are not an issue, the OE heater grid can be replaced with S&B’s Heater Block Delete, which will provide a 30.91% improvement in airflow. S&B's Heater Block Delete is CNC Machined from 6061 – T6 Aluminum and is built for extreme performance...
$99.00
Brand: Crazy Carl's
Part Number: CC-TR12V
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Another Crazy Carls original product!
The Tunnel Ram 12V is a patented intake for the 91-98 Dodge Cummins 12V diesel engine. Proudly made in the USA from aircraft quality billet aluminu..
$364.00
Brand: Aftermarket Parts
Part Number: BilletIntakePlate
12 Valve or 24 Valve Applications
This is a plate for COMPETITON use and does not include any air intake temperature sensor hole. It can however be drilled and tapped if you so desire, the sensor is 1/2" NPT.
This plate is thicker than stock to prevent warping & air leakage...
$189.50
Brand: Aftermarket Parts
Part Number: ZZ 4321-24
This manifold by ZZ Custom Fabrication (ZZ Fab) takes individual cylinder tuning to new levels with bungs (water or nitrous or both) in each runner and a large plenum air "reservoir" this manifold allows for the best balance of any intake manifold on the market. This style manifold allows for front,..
$2,500.00
Brand: Pure Diesel Power
Part Number: PDPINTMANI-24V
Custom Side Draft Intake Manifold for the 98.5-02 Cummins 5.9L
Features:
Equal Air Distribution
Outflows Competitors
Competitively-Priced
Stainless Steel Construction
We're not joking around anymore, not even "just kidding" ;)
Note: To install this manifold you need..
$849.00
Brand: Aftermarket Parts
Part Number: BBPlenum
The intake will come with mounting bolts and machining instructions for the head. The stock grid heater and gaskets can be used with it . Intake piping is not included.
By B&B Tooling...
$0.00
Brand: Cummins
Part Number: 3926381
89-98 One Piece Grid heater plenum & plate.
Factory direct.
Cummins part number: 3926381
Number 3 in image...
$1,145.47
Brand: Industrial Injection
Part Number: 24EF02
Please allow 6 to 8 weeks for shipping
ZZ FAB TOP LOAD INTAKE MANIFOLD
This Manifold is all stainless steel andd has the factory bolt pattern to accept your upper plate and "elbow". This manifold will fit both styles of 24 valve heads (early and late model) and comes with i..
$2,356.21
Brand: Haisley Machine
Part Number: ZZ 4321
DISCONTINUEDThis is the latest manifold from ZZ fab designed in conjunction with Haisley Machine for maximum performance for the 12 Valve engines. This manifold takes individual cylinder tuning to new levels with bungs (water or nitrous or both) in each runner and a large plenum air "reservoir" this..
$0.00
Brand: T/Rex Technology
Part Number: REXBILLETTWINTAKE
BACKORDERED NO ETA89-98 Cummins Billet Twin Intake Plate
Features:
Includes Mounting Kit w/ Gasket Kit
Pre-Tapped w/Plugs..
$0.00
Brand: Industrial Injection
Part Number: 24EF01
Discontinued 02/05/2024
ZZ FAB SIDE LOAD INTAKE MANIFOLD
Designed to improve "line of sight"air flow we moved the air inlet beneath the fuel rail and increased the plenum volume to make this manifold the top performer for the 5.9 Cummins engine. Made of 304 Stainless with a mild st..
$0.00
Showing 1 to 17 of 17 (1 Pages)