
Backordered
98.5+ Dodge 24 Valve Cummins HMR 14MM Cylinder Head Stud Kit
$803.42
- Part Number: HMR 1054008XHD
- Est. Ship Time: Backordered

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Backordered with No ETA (Updated on 6/10/2025)
These extra heavy duty 14mm XHD studs are made from L19 and have a glass bead finish, 220 ksi min.
Studs hold 80PSI+ Boost
STUD SETS INCLUDE:
* 26 STUDS, NUTS & WASHERS
* ARP MOLY LUBE
* INSTRUCTIONS
XHD head studs are 14mm and require that you drill and tap the block and ream the head.
We recommend that this procedure be done by a qualified machine shop.
All kits include 26 studs, nuts, 12pt nuts, assembly lube and instructions.
Picture is of 12mm studs and is only to serve as a representation.

Discontinued (Updated 6/17/2024)
3000 RPM Governor Spring Kit (3K GSK)
This kit allows your engine to have full fueling to approximately 3000RPM..
$0.00
Discontinued (Updated 3/17/2025)
4000 RPM Governor Spring Kit (4K GSK)
The Peak Diesel Governor Spring Kit is a special combination of springs a..
$0.00
4000 RPM Governor Spring Kit with 12 Heavy Duty Valve 60lb Springs
The Peak Diesel Governor Spring Kit is a special combination of Bosch springs a..
$0.00
Backordered with No ETA **Updated on 07/09/2024**
These extra heavy duty 14mm XHD studs are made from H-11 and have a glass bead finis..
$803.42
5000 RPM Governor Spring Kit (5K GSK)This 5,000 RPM kit utilizes the stock idle (large) spring and will idle at stock levels. We have installed this k..
$253.45
89-98 Dodge 5.9L 12 Valve Cummins Lift Pump Gasket
Cummins part number 3939258 lift pump to engine block gaskets. Includes #3 in the second picture o..
$6.73
Backordered with No ETA (Updated on 6/10/2025)
These extra heavy duty 14mm XHD studs are made from L19 and have a glass bead..
$803.42
Discontinued (Updated 4/19/2024)
5000 RPM Governor Spring Kit (5K GSK)
This 5,000 RPM kit does not utilize the stock idle (large) spring. We onl..
$0.00
This diode is now resin potted to protect against breakage.
For 12valve engines, years 94 to 98-1/2
Fuel solenoid failure almost always begins w..
$32.95
This replacement fusible link is the protection for the power supply to your fuel shutoff solenoid. It's a 65 amp inline fuse that is connected to th..
$14.99
Set of 6, does not include clamps. Can be shipped clamped together in groups of 3 lines each for an additional fee.
Stock replacement set. These are ..
$495.66
ATS Fire Ring Parts Kit, 1994-Early 1998 Dodge 5.9L 12V CumminsFire Ring Kit, Parts Only, 5.9L 12V Diesel. This includes Gasket and Fire Rings. (Requi..
$484.92
Full set requires 6 pistons.
Mahle part number: 224-3513
High temperature thermal coating option available.
Please allow 1-2 weeks extra d..
$91.71
The Hamilton Cams 07-H-002 Large Valves are designed for the Cummins 12-Valve engine found in your 1989-1998 Dodge Pickup. This 1.870" Intake valve fe..
$449.00
Cummins 6B5.9 ISB For CPL #2446 2447 2448 2449 2450 and 2451 Head Set
*Cylinder head bolts not included.
Made by Mahle for OEM quality.
Mahle part ..
$267.01
Includes:
Standard Head Gasket
Intake Gasket (long rectangular)
Grid Heater Gasket (square gasket)
Exhaust Manifold Gaskets
Valve Cover Gasket
..
$407.49
OEM Forged Cummins Rods, fits 89-2007 5.9L Cummins (exchange basis)
NOT CRACKED CAP RODS
Heat Treated
Stress Relieved
Machined
I..
$1,650.00
For Engine Drop Down: 03-07 CR and 6.7CR on Backorder with No ETA
For Main Stud Size Drop Down: Both on Backorder with No ETA (Updated on 6/1..
$483.82
These extra heavy duty XL 14mm XHD studs are made from H-11 and have a glass bead finish, 220 ksi min.
Formerly Made By A1 Technologies
KIT INCLUD..
$509.84
Set of 12 Rocker Arm Studs 98.5+ Dodge 5.9L & 6.7L Cummins Diesel
Torque these to 27 Ft/Lbs.
Washers are NOT Included in this Kit
Pleas..
$151.99
Cummins OEM Vacuum Pump Seal Kit For Your 1991.5-2002 Dodge Ram 2500/3500 Cummins Turbo Diesel
This kit includes everything needed to reseal that p..
$26.60
This 70amp relay activates the fuel solenoid on years 94-98.5 12valve. If this relay is bad your engine will crank fine but will not start because the..
$19.90
97.5-2007 Dodge 5.9L Cummins Main StudsNot sure if yours is a 97.5 block? Look on the passenger's side of the engine. If there are 2 turbo drain ports..
$269.73
1989-2018 Dodge 5.9L & 6.7L Cummins Diesel Heavy Duty Rod Bolts
Made By ARP
THESE ARE MADE SPECIALLY BY ARP FOR OUR SUPPLIER. ARP DOES NOT S..
$225.00
Cummins 14MM Head & Main Stud Bottoming Tap
14mm x 2.00
Picture for representation purposes only...
$33.55
1989-1998 12 Valve Cummins 5.9L Extreme duty 750hp and over
The pushrod is a very important and often overlooked component in any high horsepower ..
$219.00
Contact to Confirm Availability!
Includes standard thickness AFTERMARKET 12 valve Cummins gasket modified for the use of fire rings.
Requires t..
$267.90
Dodge 5.9L 24 Valve Cummins Diesel VP44 Hot Rod Injection Pump
Increase Horsepower And Torque (80-100 HP)
Built W/ Brand New Factory OE..
$1,884.97
ARP Pro Series Connecting Rod Bolts
For the most severe applications, in conjunction with aftermarket I-beam rods, ARP has developed the "Pro" Series..
$206.33
Hard Blok has the optimum ratio of graded iron for strength and vibration dampening. Its thermal coefficient is nearly identical to cast iron, a..
$149.00
07.5-22 Dodge 6.7L Cummins Diesel New .120 High Flow Fuel Connector Tubes
Includes new o-rings.
Recommended if you have a modified or dual cp3 s..
$357.94
Front core plug plate is for use on a 89-02 block for high performance applications.
Will not work if belt or stock fan hub is being used...
$43.96
High Performance Delivery Valves
Fits P7100 injection pumps found on 94-98 Dodge Cummins and other applications. Custom cut delivery valvesAdditional..
$416.76
5000 RPM Governor Spring Kit (5K GSK)This 5,000 RPM kit utilizes the stock idle (large) spring and will idle at stock levels. We have installed this k..
$253.45
Dodge 5.9L Cummins Diesel Bronze Cam Thrust Plate, also known as a cam retainer (not cam GEAR retainer though)For 89+ 3.9L/5.9L/6.7L Cummins Blocks.Ma..
$93.24
Backordered with No ETA (Updated on 3/5/2025)
HMR 12mm Head stud kit for the 94-98 Dodge 5.9L 12 Valve Cummins Turbo Diesel
These s..
$486.62
Contact to Confirm Availability!
Includes standard thickness AFTERMARKET 12 valve Cummins gasket modified for the use of fire rings.
Requires t..
$267.90
This includes:
Overflow valve banjo bolt adapter
Braided Line Adapter
Braided Line (runs from Ppump return to factory tee location)
Tee Fi..
$122.21
Includes standard thickness multi-layer steel 6.7L Cummins gasket modified for the use of fire rings.
Requires the machining of grooves into the cy..
$333.84
Set of 6 Rocker Arm Studs 1989-1998 Dodge Cummins Diesel
Torque these to 27 Ft/Lbs.
Please allow 1-2 days for shipping.
Part #12..
$78.36
This is the oil feed line you will need if you have a VP44 truck and are installing a P7100 Injection pump.
This line re-locates the oil feed into th..
$183.98
Includes standard thickness 24 valve AFTERMARKET head gasket modified for the use of fire rings.
This kit will also work on 2003-2007 Dodge 5.9L Cu..
$255.00
OEM Forged Cummins Rods, fits 89-2007 5.9L Cummins (exchange basis)
NOT CRACKED CAP RODS
Heat Treated
Stress Relieved
Machined
I..
$1,650.00
For Engine Drop Down: 03-07 CR and 6.7CR on Backorder with No ETA
For Main Stud Size Drop Down: Both on Backorder with No ETA (Updated on 6/1..
$483.82
Set of 12 Rocker Arm Studs 98.5+ Dodge 5.9L & 6.7L Cummins Diesel
Torque these to 27 Ft/Lbs.
Washers are NOT Included in this Kit
Pleas..
$151.99
Installing a new exhaust manifold, or simply removing a stock or aftermarket manifold to change gaskets? If so, you'll find that it is a real hassle t..
$52.99
Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L
Features:
Equal Air Distribution
3.5 Inch V-Band Inlet. V-band clamp is..
$950.00
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is ..
$849.00
6.7L Cummins QSB style piston. Single piston. Quantity six(6) are required for entire set.Comes with rings. Part Number: 4376353..
$391.81
D&J Precision Machine Performance Series 6.7 Cummins Long Block: Upgrade to D&J Precision Machine Performance Series 6.7 Cummins Long Blo..
Starting From $19,949.99
With the ever growing safety rules with competition vehicles, air shutoff devices are becoming a must have.
Don't waste your money on those e..
$100.00
The Strongest Billet Cummins Rods On The Market: Upgrade to D&J X-BEAM Billet Cummins Rods for the ultimate in strength and reliability for y..
$3,937.49
The Strongest Billet Cummins Rods On The Market: Upgrade to D&J X-BEAM Billet Cummins Rods for the ultimate in strength and reliability for y..
$3,569.99
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –• 100% M..
$3,375.00
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –
..
$3,475.00
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –
..
$3,475.00
The affordable Wagler Street Fighter Series Cummins 5.9/6.7L connecting rods are the perfect solution for a hot street truck making 1,500 HP or less. ..
$1,950.00
WCP Billet Main Caps are designed and machined in house
Does not distort when torquing down main studs
Adds strength to the bottom end
Can be us..
$779.00
NOT FOR SALE IN CALIFORNIA!!!
Fits: 89-98 Dodge Ram 5.9L Cummins
When you start making big power in your 1989-1998 Dodge 5.9L Cummins make..
$299.00
Fits: 89-98 Dodge Ram 5.9L Cummins
HAMILTON CAMS FIRE RING HEAD GASKET (STANDARD) 1989-1998 DODGE 5.9L CUMMINS
High performance diesel eng..
$299.00