-80x80.jpg)
HMR 14MM 94-98 Dodge 5.9L 12V Cummins XL Main Stud Kit
- Part Number: XL14MMStuds
- Est. Ship Time: Contact for Availability!
$396.36
More from this brand
Starting From $357.94
Starting From $0.00
Starting From $81.33
Starting From $474.41
Limited Availability!These extra heavy duty XL 14mm XHD studs are made from H-11 and have a glass bead finish, 220 ksi min. Formerly Made By A1 Techno..
$396.36
97.5-2007 Dodge 5.9L Cummins Main StudsNot sure if yours is a 97.5 block? Look on the passenger's side of the engine. If there are 2 turbo drain ports..
$269.73
89-97 Dodge 5.9L Cummins 14mm Main Studs
STUDS vs. BOLTS
ARP recommends the use of main studs over bolts whenever possible for several
key reason..
$304.27
Cylinder Head Alignment Dowel Pin (2 included)Use with 14MM Head Stud Kits..
$23.35
Main studs
14mm x 2.00
4340 material
Black oxide finish
Hex broach for easy installation
HD washers and 12 pt hardened nuts
Instructions
Sta..
$263.65
89-17 Dodge 5.9L/6.7L 12/24 Valve & CR Cummins Diesel Custom Girdle KitThis is the GORILLA girdle, sold without main studs. 89-02 girdle pictured...
$483.82
This kit involves removing the rear freeze plug from the block and bolting a plate over it (shown in picture) and running a 5/8 ID coolant hose t..
$148.21
5.9L 12 & 24 Valve Cummins 6BT Oil Pump
This pump will bolt right into your 12 or 24 valve Cummins engine and is a higher volume pump than the st..
$153.03
Dodge 5.9L Cummins Diesel Billet Cam Gear Retainer
A must for trucks running 13mm pumps, also recommended for trucks running high hp with 12mm pumps...
$41.47
Dodge 5.9L Cummins Diesel Bronze Cam Thrust Plate, also known as a cam retainer (not cam GEAR retainer though)For 89+ 3.9L/5.9L/6.7L Cummins Blocks.Ma..
$81.33
12-60lb Intake & Exhaust Valve Springs 89-98 12 Valve Dodge 5.9L Cummins
The seat pressure on these springs is ~150bs at the installed height of 1.95..
$275.76
Contact to Confirm Availability!Includes standard thickness AFTERMARKET 12 valve Cummins gasket modified for the use of fire rings.
Requires the mac..
$255.00
Backordered
Backordered with No ETA **Updated on 08/09/2023**89+ Dodge 5.9L & 6.7L Cummins Diesel Heavy Duty Rod Bolts Made By ARP THESE ARE MADE..
$184.00
BILLET/TITANIUM VALVE SPRING RETAINERS & HARDENED KEEPERS
Dodge 1989-1998 5.9L 12 Valve Cummins
We highly recommend the use of titanium valve sp..
$0.00
Heavy duty 4340 Chromoly pushrods with billet ends.
A must for high-rpm, high hp engines!Standard length...
$309.00
We have the solution for blowing freeze plugs!
We now offer billet Aluminum freeze plugs with bar. The bar gets inserted into the coolant passage and..
$39.95
Fluidampr Cummins 3500+ RPM Drill Pin Kit
The Cummins drill pin kit adds extra pins between the damper and the crank.Specifically designed for engine..
$67.15
Stainless Steel oversized fuel injection lines.
Lines sizes are .078" through .120"
To upgrade to the lines clamped as pictured, select the STK opti..
$619.32
12mm Head stud kit for the 1989-1998 Dodge 5.9L 12 Valve Cummins Turbo Diesel
CUSTOM AGE 625 PLUS®: This newly formulated super-alloy demonstrates su..
$1,389.36
The Fluidampr Performance Diesel Series Damper 960311 will smooth out the harsh engine harmonics while extending the life of the engine in your 1989-1..
$630.70
07.5+ Dodge 6.7L Cummins Diesel New .120 High Flow Fuel Connector TubesIncludes new o-rings.Recommended if you have a modified or dual cp3 setup.PLEAS..
$357.94
BILLET/TITANIUM VALVE SPRING RETAINERS & HARDENED KEEPERS
Dodge 1989-1998 5.9L 12 Valve Cummins
We highly recommend the use of titanium valve sp..
$0.00
Dodge 5.9L Cummins Diesel Bronze Cam Thrust Plate, also known as a cam retainer (not cam GEAR retainer though)For 89+ 3.9L/5.9L/6.7L Cummins Blocks.Ma..
$81.33
Backordered
Backordered with No ETA **Updated on 09/01/2023**HMR 12mm Head stud kit for the 94-98 Dodge 5.9L 12 Valve Cummins Turbo Diesel
These stu..
$474.41
Contact to Confirm Availability!Includes standard thickness AFTERMARKET 12 valve Cummins gasket modified for the use of fire rings.
Requires the mac..
$255.00
This includes:
Overflow valve banjo bolt adapter
Braided Line Adapter
Braided Line (runs from Ppump return to factory tee location)
Tee Fitting ..
$119.35
5000 RPM Governor Spring Kit (5K GSK)This 5,000 RPM kit utilizes the stock idle (large) spring and will idle at stock levels. We have installed this k..
$241.81
Contact to Confirm Availability! Currently 3 weeks out on Backorder 07/11/2023Includes standard thickness multi-layer steel 6..
$303.05
Set of 6 Rocker Arm Studs 1989-1998 Dodge Cummins Diesel
Torque these to 27 Ft/Lbs.
Please allow 1-2 days for shipping.
Part #12VROCKERSTUDS
Im..
$74.89
This is the oil feed line you will need if you have a VP44 truck and are installing a P7100 Injection pump.
This line re-locates the oil feed into th..
$184.00
Contact to Confirm Availability!Includes standard thickness 24 valve AFTERMARKET head gasket modified for the use of fire rings.
This kit will also ..
$247.73
OEM Forged Cummins Rods, fits 89-2007 5.9L Cummins (exchange basis)
NOT CRACKED CAP RODS
Heat Treated
Stress Relieved
Machined
Includes ARP..
$1,280.74
89-17 Dodge 5.9L/6.7L 12/24 Valve & CR Cummins Diesel Custom Girdle KitThis is the GORILLA girdle, sold without main studs. 89-02 girdle pictured...
$483.82
Set of 12 Rocker Arm Studs 98.5+ Dodge 5.9L & 6.7L Cummins Diesel
Torque these to 27 Ft/Lbs.
Washers are NOT Included in this Kit
Please allow 1-..
$151.99
Heavy Duty High Performance Push Rods, Set of 1289-98 5.9L 12 Valve Cummins Diesel
By Haisley Machine...
$301.75
-250x250w.jpg "03-18 5.9L & 6.7L Cummins Wagler Dual CP3 Front Cover")
Wagler Cummins Dual CP3 Cover for Common Rail Cummins Engines.Drives both injection pumps off the rear.The ECM must be relocated.Part Number: WCP..
$2,750.00
Billet Stage 2 Intake ManifoldsThe Billet Stage 2 Intake Manifold is designed for our Stage 2 cylinder heads. They are sold with either 5.9 intak..
Starting From $1,020.00
6.7L Cummins QSB style piston. Single piston. Quantity six(6) are required for entire set.Comes with rings. Part Number: 4376353..
$341.76
With the ever growing safety rules with competition vehicles, air shutoff devices are becoming a must have. Don't waste your money on those expen..
$100.00
89+ 5.9L & 6.7L Cummins D&J X-Beam 1.000" Longer Billet Connecting RodsProven over 3000hp and 4000tq, we design our X-BEAM Billet Cummin..
$3,750.00
89+ 5.9L & 6.7L Cummins D&J X-Beam Stock Length Billet Connecting RodsProven over 3000hp and 4000tq, we design our X-BEAM Billet Cummins Rods ..
$3,395.00
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –• 100% M..
$3,192.99
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –• 100% M..
$3,475.00
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –• 100% M..
$3,375.00
PDP Pick
The affordable Wagler Street Fighter Series Cummins 5.9/6.7L connecting rods are the perfect solution for a hot street truck making 1,500 HP or less. ..
$1,950.00
-250x250w.jpg "89-18 Dodge 5.9L & 6.7L Cummins Wagler Billet Main Caps")
WCP Billet Main Caps are designed and machined in houseDoes not distort when torquing down main studsAdds strength to the bottom endCan be used with o..
$750.00
NOT FOR SALE IN CALIFORNIA!!!Fits: 89-98 Dodge Ram 5.9L Cummins When you start making big power in your 1989-1998 Dodge 5.9L Cummins make sure yo..
$245.00
Fits: 89-98 Dodge Ram 5.9L Cummins HAMILTON CAMS FIRE RING HEAD GASKET (STANDARD) 1989-1998 DODGE 5.9L CUMMINSHigh performance diesel engines req..
$225.00
Fleece Performance stainless steel exhaust manifold stud kit for Cummins. Our exhaust manifold studs are produced in the USA from aged 630 stainless s..
$229.99
Waterman 500 sprint pump that comes along with a 3 bolt mounting flange. Rated 5 GPM. This is a mechanical fuel pump used to deliver fuel to p-pumps a..
$679.00