This is a non-returnable partHx40 Flange, Sleeve will fit inside 4" exhaust tubing. This is made from steel. This will work with S300 turbos that are..
DiscontinuedThis is a non-returnable partThis part is jigged and welded. You'll get a 5" V-Band Clamp and a 5" Seal Clamp for install. **PLEASE BE ADV..
The sole job of the spring wastegate actuator, is to act as a pressure relief valve that controls the turbocharger boost output. The main parts of an ..
Center dump COMPETITION series Steed Speed Exhaust ManifoldAvailable in a T4 or T6 turbo exhaust flange.This header has been designed for those who ar..
Product Unavailable (8-2-23)The turbine housing outlet that that this flange fits is a T6 pattern with 5.75" outlet.Image for representation only, may..
T4 Multi Layer Stainless Steel gasket. Hi Performance Turbocharged Engines require a better than average sealing system. Source Automotive will not ac..
3" V-Clamp style flange fits the 1989 -1998 H1C & HX35 turbo outlet. The OD of the opposite end slips into a 4" OD tube. (Same flange used on our 1989..
This is a non-returnable part Flexible turbo oil drain for Hx35, Hx40 and S300 Turbos.
Overall length approximately 12", Made of Stainless Steel. Whe..
DiscontinuedThis is a non-returnable partThis part is jigged and welded. You'll get a 5" V-Band Clamp and a 5" Seal Clamp for install. **PLEASE BE ADV..
07.5-09 6.7L Intercooler Boot Kit (for 3.5" Intake Tube) comes with 2.75" x 9" tube, 3" Hump Hose, 3.5" Hump Hose, and a 3" to 3.5" reducer with clamp..
It's ready. It fits. It works. It rocks! One of the best features of the 6.7L engine is the factory exhaust brake. Seems to me most folks don't want ..
The 07.5-09 6.7L Intercooler Boot Kit comes with a 2.75" x 9" tube, 2 3" hump hoses, and 1 3.5" hump hose, as well as the clamps to match. **Image is ..
Through extensive research & development and a multitude of program changes, Source Automotive has designed their 2nd gen twin turbo kit to allow the..
This is a non-returnable part12V S400 Turbo mount to engine. Style varies by year, please provide that info. This is required with our hotpipes. Parts..
This is a non-returnable partThese two water lines for your 12V relocate your old lines to new location for twin turbo.
**PLEASE BE ADVISED THERE ARE..
DISCONTINUEDThis is a non-returnable part24V S400 Turbo mount to engine. This is required with our hotpipes. Parts are powder coated. Mounting bolts a..
This is a non-returnable partThis line relocates your old line to new location for twin turbo. Comes powder coated. (A new 90 Degree elbow is needed ..
This kit has all the necessary hardware for your stock or performance HE300 turbo install to help prevent leaks and to replace older studs that are pr..
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and machi..
The Industrial Injection High Flow 90° Cast Elbow was designed and tested to out perform and out flow the competition. This precision casted and machi..
The Industrial Injection K27 Exhaust Outlet Elbow is a stock replacement elbow for your 1992-2002 Cummins trucks with v-banded 5 bolt flange. After ye..
Get the most versatile turbo mounting kit for your 1994-2007 Dodge 5.9L Cummins with the BD-Power 1045983 Turbocharger Mounting Kit. This kit includes..
T4-T3 Adapter Flange
With T4 sized turbine housings, there is no performance advantage to changing the exhaust manifold to match... So, why go to the..
This black 1.0in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley ..