Replacement high pressure fuel lines from Fleece Performance. These are a direct replacement for your cracked, broken, or leaking injector lines. Replaces Cummins part number 4935981 on cylinder 1. Part number: FPE-FL-CUMM-6.7-1 ..
Replacement high pressure fuel lines from Fleece Performance. These are a direct replacement for your cracked, broken, or leaking injector lines. Replaces Cummins part number 4935982 on cylinders 2 & 3. Part number: FPE-FL-CUMM-6.7-23..
Replacement high pressure fuel lines from Fleece Performance. These are a direct replacement for your cracked, broken, or leaking injector lines. Replaces Cummins part number 4935974 on cylinders 4 & 5. Part number: FPE-FL-CUMM-6.7-45..
Replacement high pressure fuel lines from Fleece Performance. These are a direct replacement for your cracked, broken, or leaking injector lines. Replaces Cummins part number 4935976 for cylinder 6. Part number: FPE-FL-CUMM-6.7-6..
Anodized aluminum 3/8" quick connect to -8AN male adapter fitting. Fits 2003-2018 Dodge Ram with Cummins OE sending unit sending unit output to allow you to easily adapt aftermarket pumps and filters to the OE sending unit, including our Fleece Performance Auxiliary Fuel Filter and Line Kits (P..
Introducing our full-featured fuel filter conversion kit for the 2003-2018 Dodge Cummins. This kit builds off our standard kit with the addition of an integral high-flow fuel heating element. The kit includes everything you need to properly route, plumb and filter fuel for your Cummins engine ..
Fits: 2003-2019 Dodge 2500/3500 35 Gallon Tank (98.3" Bed Length)
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.
Di..
FASS Fuel Systems Cummins Fuel Distribution Block (CFDB1001K) The FASS Fuel Systems Cummins Fuel Distribution Block is designed for high performance applications that are utilizing up to three CP3s, but can also be used on single or dual CP3 applications.Our uniquely shaped Fuel Distribution Block a..
All new stainless steel fuel tube nuts from Fleece Performance. Ensure a proper seal on your injector tubes and high pressure injection lines with our high tolerance nuts produced from 300 series stainless steel. Includes a quantity of 6 nuts. APPLICATION NOTESReplaces Cummins P/N: ..
Fits:
2005-2010 Dodge Cummins 5.9L/6.7L
2011-2018 Ram Cummins 5.9L/6.7L
2021-2022 Ram 6.7L (Stock to Moderate)
This FASS TSD07100G Titanium Signature Series 100GPH Fuel System is the perfect for your truck. The Titanium Signature Series diesel fuel System was bu..
S&B Tanks 60 Gallon replacement fuel tankImportant Note: This tank won't fit trucks with aftermarket drivelines.COMPATIBLE WITH GOOSENECK AND 5TH WHEEL: YESCOMPATIBLE WITH OE SKID PLATE: NODIMENSIONS: 82.31" X 17.68" X 18.99"DRAIN: YESEMBEDDED FITTING THREAD SIZE: 1..
Dodge Applications notes:
Allows titan 7030206 to be mounted into a 06-12 mega cab short bed truck. Used in trucks that have the factory skid plate beneath the transmission.
Ford Application notes:
Allows titan 7020308 to be mounted into the 08-10 F450 long bed truck. Tank can be ..
Direct fit factory replacement Mopar Fuel Filter Fuel Line Kit for 07.5-10 6.7L Cummins. Also sometimes referred to as: Fuel Supply Tube, Fuel Filter Connector, Fuel LineReplaces Mopar: 68023974AA, 68026997AAPart can be found as #3 on the illustration.Mopar: 68023974AB..
The XDP OER Series New Fuel Rail Assembly XD601 will replace the contaminated fuel rail in your 2007.5-2012 Dodge Ram 6.7L Diesel. Like all XDP OER Series components, this fuel rail is manufactured to OE specifications. Each unit comes ready for installation and includes a rail pressure sensor and f..
Direct fit replacement injector supply tube by Bostech for 07.5-13 Dodge Ram 6.7L Cummins. These are recommended to be changed when replacing a fuel injector. This is a reman product and does carry a core charge.
Cross reference numbers: 68005335AA, 2872395, 4929864, F00RJ01831
Injec..
Replace the Factory Fuel Line on your 2007.5-2018 Dodge 6.7 Cummins with this DTech DT670012 Fuel Injection Line for Cylinders 2 and 4. This line is direct fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over..
Fix your cylinder 6 Injection line with this high quality replacement for your factory line from DTech, Dtech Fuel Lines feature a direct-fit design with no modifications needed for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fu..
The Dtech Injection Lines are quality replacements for factory injector lines on your 2007.5-2018 6.7 Cummins. This line is direct fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fuel line is constru..
Replace the contaminated or damaged fuel line on your 2007.5-2018 Dodge 6.7 Cummins with the DTech DT670010 Pump To Rail Fuel Injection Line. Dtech Fuel Lines are a direct-fit replacement and do not require any additional modifications for installation. DTech has been a leading supplier of diesel in..
Fits: 2007.5-2018 6.7L CumminsThis genuine Cummins Fuel Injection Line Noise Isolator For 2007.5-2018 6.7L engines is an OEM replacement that maintains factory fit and performance. Each component is constructed from quality materials to give you durability and long lasting performance. This Cu..
The Dtech DT670011 Fuel Injection Line for Cylinder 1 is a perfect replacement for factory lines. The line is direct-fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fuel line is constructed from..
ATS Fuel Rail Pressure PlugFitment: 2007½-2018 Dodge Ram 6.7L Cummins Common Rail A common failure of the Ram 6.7L Cummins Common Rail is the pressure relief valve. These relief valves are a basic spring, designed to relieve pressure as it exceeds a specific predetermined pressure. As pressure ..
New! Replacement high pressure fuel lines from Fleece Performance. These are a direct replacement for your cracked, broken, or leaking injector lines. This complete set includes six lines. Kit contents: (Qty 1) FPE-FL-CUMM-6.7-1(Qty 2) FPE-FL-CUMM-6.7-23(Qty 2) FPE-FL-CU..
The Industrial Injection dual CP3 is the ultimate for performance. This kit can be purchased with a new, modified, Dueling Dragons (two 85% Dragon Fire CP3's) or the Dueling Double Dragons (two 120% CP3's) CP3’s for those who compete in the competition circuits.Efficiency is increased and EGTs reduc..
DescriptionThe Industrial Injection dual CP3 is the ultimate for performance. This kit can be purchased with a new, modified, Dueling Dragons (two 85% Dragon Fire CP3's) or the Dueling Double Dragons (two 120% CP's) CP3’s for those who compete in the competition circuits.Efficiency is increased and ..
07.5-22 Dodge 6.7L Cummins Diesel New .120 High Flow Fuel Connector Tubes
Includes new o-rings.
Recommended if you have a modified or dual cp3 setup.
PLEASE ALLOW 1-3 DAYS FOR SHIPMENT, WE BUILD THESE ON DEMAND.
Part Number: FT120/6.7NEW..
Direct fit replacement connector tube set for 07.5-22 Dodge Ram 6.7L Cummins It is recommended that these are replaced anytime you remove/ replace an injector. These are 100% new units.
Part number: DT670005..
When replacing the injectors in your 6.7L Common Rail we highly recommend replacing the injector connecting tubes to avoid new injector contamination. The most common failure of new injector installations is contamination and the problem that we see most on these comes from the injector connecting t..
The XDP OER Series Fuel Injector Connector Tube XD528 is a high-quality replacement for failed connector tube in your 2007.5-2022 Dodge Ram 6.7L Diesel. Also known as a fuel supply tube or injector supply connector, this tube feeds fuel from the high-pressure common rail to the fuel injectors.
Over..
The Fleece Performance Dual Pump Kit Hardware Kit for the 6.7L Cummins is designed to fit perfectly and comes with everything you need to get the job done right the first time with a simple and clean install. Our dual pump kit mounts the second pump on the front cover giving you a low profile look. ..
56 Gallon*, extra heavy duty, cross-linked polyethylene fuel tank. New for 2012. Tank comes complete with powder-coated or plated steel mounting strap support set, extruded rubber mounting bushings, rollover safety vent valve, shims and needed accessories.For DODGE 2500 & 3500 Crew Cab trucks wi..
The XDP Cummins 6.7L CAT Filter Adapter XD381 improves fuel filtration efficiency and ease of service of the fuel system on your 2010-2018 Dodge 6.7L Cummins. The XD381 features a billet aluminum fuel filter head that replaces the stock fuel filter and allows you to mount the CAT 1R-0750 high effici..
SureFlo performance sending units are a great alternative for trucks with aftermarket frame-mounted lift pumps looking to replace a malfunctioning fuel level sender or combine with a new frame-mounted lift pump for a clean install without the pitfalls of a sump or draw straw.
PROBLEM: If you are ..
SureFlo performance sending units are a great alternative for trucks with aftermarket frame-mounted lift pumps looking to replace a malfunctioning fuel level sender or combine with a new frame-mounted lift pump for a clean install without the pitfalls of a sump or draw straw.
PROBLEM: If you are ..
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.
03-18 trucks, this blocks off the ccv breather drainback port.&nbs..
89-18 5.9L & 6.7L 12V/24V Dodge Cummins Injection Pump Gear Puller
Tork Teknology specializes in designing and manufacturing tools for the Cummis 5.9 and 6.7 diesel. (The Duramax is next) Our lastest tool is the CGP020 injection pump gear puller for the Bosch VE, P7100, VP-44 and CP..
PROBLEM: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some pretty significant drawbacks including the ¼ tank issues that result in cavitation of the ..
The XDP Fuel Tank Sump XD182 is the perfect solution for those wanting to maximize fuel delivery to their engine. This One Hole Design Fuel Tank Sump is easier to install than others on the market, and it only requires one hole in your fuel tank!The XD182 provides an outlet for fuel on the bottom of..
Wagler Cummins Dual CP3 Cover for Common Rail Cummins Engines.
Drives both injection pumps off the rear.
The ECM must be relocated.
Part Number: WCPD6714
Superseded Part Number: WCPD6710 ..
Industrial Injection Billet Front CP3 Access Cover
Clean up the look of your engine with this billet aluminum front CP3 access cover
Features:
Fits 2003+ 5.9L & 6.7L Cummins
Billet Aluminum Cover
Prevents Stripping Out Center
Clean Look To Help Engine Stand Out
Re Us..
Features
Pump to Pump Design for Ease of Installation, Better Looks, and More Efficiency
Custom Billet Wheel (with optional polishing)
Custom Second Wheel Billet Acorn Nut
Comes with Hardware and High-Pressure Fitting/Line
Comes with Fish CP3 Controller for Reliability and Simplicity
..
Also called a connector tube or crossover tube nut. This is for a single (1) nut, 6 are needed.Genuine OE Bosch
Bosch Part number: F00RJ00437Replaces:Cummins: 3946625, 4893739, 5264181Mopar: 5086866AB..