2010-2012 Ram 6.7L Cummins Diesel Replacement Intercoolers & Intercooler Boots

Replaces the weak factory plastic intercooler pipe on the 07+ Dodge 6.7L. Eliminates potential cracking from increased boost pressures that come with turbo and electronic modifications. Has a polished chrome-like appearance and fits 07 and up model years. Product Warranty 1-Year Parts  BD: 104259..

Fits: 2010-2012 Dodge 6.7L CumminsBanks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") which will improve airflow, and allow the turbocharger to spool up faster. Banks hot and cold side tubes have up to 65% percent greater..

Fits: 2010-2012 Dodge 6.7L Cummins Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. BD boots can withstand over 100 psi of boost and are secured by rugged, spring-loaded, stain..

Increase flow area up to 65% over the stock boost tubes with Banks' huge 3-1/2" boost tubes. Stock consists of a 3" plastic cold side tube and a 2.75" metal hot side tube. Banks boost tubes are both 3-1/2" constant diameter mandrel bent. More air allows for more fuel which means more horsepower.Fitm..

PRODUCT FEATURESDirect fit for the 2010–2012 Dodge Ram 6.7L CumminsFive layers of 100% silicone for maximum durability and blowout preventionDuraCore™ technology provides superior resistance to heat, pressure, fuel, and oilIncludes high-quality constant-tension T-bolt clampsMishimoto Lifetime Warran..

PRODUCT FEATURESDirect fit, mounts in the stock locationBar-and-plate construction with cast aluminum end tanks52-percent greater internal volume than stock3-in core is 100-percent thicker than stockEnd tanks strategically designed for optimal airflowInternal fins designed for maximum heat transfer ..

Shibby Engineering's boost tube is designed to replace the factory intercooler tube. It is constructed from 3.5" mandrel bent stainless steel. The boost tube increases efficiency, spool-up & throttle response. This product comes uncoated in the raw material finish. Fitment: Fits stock intak..

Fits: 2010-2012 Dodge 6.7L Cummins Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") which will improve airflow, and allow the turbocharger to..

Does your diesel have High EGTs, Excessive SMOKE, Increased Turbo Lag, and Less Power than it used to? Let’s talk about boost leaks. Your truck needs air! Not a little bit of air. Your diesel engine needs all the incoming air it can get. Increasing air in the combustion process will help ma..

Use this Intake Leak Pressure Tester to make sure you get 100% performance from your turbo. Intake leaks can overwork or even destroy a turbo and cause a rich or lean condition in the engine. To eliminate your intake leaks, simply attach this Intake Leak Pressure Tester to your turbo inlet and appl..

GDP High Performance Silicone Intercooler Boot Kit for '10-'12 Dodge Ram Note: Not for use on earlier trucks. Silicone intercooler replacement boot kit for 10-12 6.7L Dodge Cummins. Consists of one silicone high pressure turbo to intercooler hose and three high pressure silicone straight hoses. Hig..

Use this Intake Leak Pressure Tester to make sure you get 100% performance from your turbo. Intake leaks can overwork or even destroy a turbo and cause a rich or lean condition in the engine. To eliminate your intake leaks, simply attach this Intake Leak Pressure Tester to your turbo inlet and appl..

Use this Intake Leak Pressure Tester to make sure you get 100% performance from your turbo.Intake leaks can overwork or even destroy a turbo and cause a rich or lean condition in the engine. To eliminate your intake leaks, simply attach this Intake Leak Pressure Tester to your turbo inlet and apply ..

PLEASE NOTE! THIS PRODUCT CANNOT SHIP TO CALIFORNIAThe Mishimoto MMINT-RAM-10 Intercooler for your 2010-2012 Dodge 6.7L Cummins is a direct fit, upgraded replacement for your factory intercooler. Manufactured with robust cast aluminum end tanks and a dense bar-and-plate core, this intercooler provid..

Our 3.5" MEGA Passenger Side Intercooler Tube for your 2010-2012 Dodge 6.7L Cummins is a perfect compliment to our 3.5" Pusher MEGA Intake System. By replacing the anemic stock intercooler tube you'll lower EGTs while increasing fuel economy, throttle response and turbo spool.Intercooler Compatibili..

The Pusher intercooler tube kit for the 2010-2012 Cummins 6.7L is built around 3.5" mandrel bent .060" thick tubing. These tubes increase air flow by 35% over the factory 2.4" ID plastic intake plumbing. This kit also includes heavy duty 4-ply silicone couplers and stainless T-bolt clamps to make in..

GDP High Performance "Hot Side" Silicone Intercooler Boots for '2010-'2012 Dodge Ram Note: Not for use on earlier trucks. Silicone "hot side" intercooler replacement boot kit for 10-12 6.7L Dodge Cummins. Consists of one silicone high pressure intercooler to boost tube coupler and one silicone hig..

Features: Outflows factory intercooler tube by 2% 2-3/4" Hot-Side mandrel-bent aluminum tube Powder-coated wrinkle-black for heat resistance Includes premium clamps and silicone couplings for long life, perfect fit and strength Works with OE intercooler Uses all factory mounting..

The CSF Heavy-Duty Intercooler is manufactured to provide durability and performance on your 2010-2012 Dodge 6.7L Cummins. This heavy duty Intercooler is built using a bar and plate design with industry leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF to s..

GDP High Performance "Cold Side" Silicone Intercooler Boots for '2010-'2012 Dodge Ram Note: Not for use on earlier trucks. Silicone "cold side" intercooler replacement boot kit for 10-12 6.7L Dodge Cummins. Consists of one silicone high pressure intercooler to boost tube coupler and one silicone h..

Features: Outflows factory intercooler tubes 2-3/4" Hot-Side and 3-1/2" Cold-Side mandrel-bent aluminum tubes Powder-coated wrinkle-black for heat resistance Includes premium clamps and silicone couplings for long life, perfect fit and strength Works with OE intercooler Uses all factory moun..

The aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube outflows the factory intercooler tube by 25%.  Not only will you get increased performance but you will also see lower EGT's and increased MPG.  This tube includes two 1/8" NPT bungs for..