For model years 2013-2022.For all Mega Cab 2500 & 3500 Models with Cummins Engines. Tank fits standard and dual rear wheel models.The TITAN tank is 19 gallons larger at 50 gallons. The stock tank is only 31 gallons.Note: For use with diesel fuel ONLY!Our extra large fuel tanks provide freedom; f..
Custom Competition Side Draft Intake Manifold Plenum for the 03-18 Cummins 5.9L or 6.7LThis is a custom manifold that was made for a 3.6 pulling truck before the customer changed his mind and went with a runner style intake. On the shelf ready to go. As this is custom it is a non-returnable par..
S&B's 52-gallon fuel tank directly replaces the OEM 31-gallon tank without any cutting, drilling, or special modifications. This makes for a trouble-free, faster installation process. S&B's replacement fuel tank holds 2 more gallons than competitor tanks allowing you to save time, go futher,..
When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.FEATURESHeater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when ..
Fits: 2013-2018 Dodge 6.7L CumminsLooking for an OE quality piston ring set that will help maintain factory performance in your 6.7 Cummins 2013-2018? Look no further than Clevite! Their S42409 Piston Ring Set meets or exceeds stock specifications, so you can be confident it will do the job right. D..
Fits: 2013-2018 Dodge 6.7L CumminsLooking for an OE quality piston ring set that will help maintain factory performance in your 6.7 Cummins 2013-2018? Look no further than Clevite! Their S42409.020 Piston Ring Set meets or exceeds stock specifications, so you can be confident it will do the job righ..
Fits: 2013-2018 Dodge 6.7L CumminsLooking for a top-quality piston ring set that will fit your 6.7 Cummins 2007.5-2017 model perfectly? Mahle's S42140.040 Piston Ring Set (.040) is just what you need! This direct-fit replacement maintains a factory performance while providing OE quality, so you can ..
This is a MUST for any truck that has a 68-RFE or Aisin AS69RC transmission or the Dodge HEMI with 545RFE, 65RFE, or 66RFE Transmissions in it. Dodge decides to incorporate a transmission cooler by pass valve into the cooling system of the 68-RFE and Aisin AS69RC that bypasses the transmission coole..
Fits: 2013-2018 Dodge 6.7L CumminsThe Full Send Diesel Bypass Transmission Line Kit is the perfect solution for your 6.7 Cummins. No more hose clamps needed with this billet -AN fittings and durable braided hose setup. • High-quality transmission lines• Designed to work with Mishimoto's upgrade..
Fits 2013-2018 Ram 6.7L CumminsDesigned utilizing the latest technology, this product by Mishimoto features premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle, it is manufactured to meet or exceed stringent industry standards. Installs in less t..
The S&B Tanks 10-1007 60 Gallon Midship Replacement Fuel Tank will allow you go longer between fill ups in your 2013-2021 RAM 6.7L Cummins (Crew Cab, Long Bed). This fuel tank is a direct replacement for the OEM 32-gallon tank, and does not require any cutting, drilling, or special modifications..
55 Gallon*, extra heavy duty, military grade, cross-linked polyethylene fuel tank. For 2013 and newer vehicles with DEF systems. Tank features .250” (1/4”) wall thickness, and comes complete with galvanized steel mounting straps, mounting bushings, rollover safety vent valves, and needed accessories..
52 Gallon (196 Liters)*, extra capacity, extra heavy duty mid-ship, replacement tank for the ultimate in fuel range.This tank only fits 4 wheel drive, 4x4 trucks ONLY. It will not fit 2 wheel drive, 2WD trucks!Tank comes complete with black coated, galvanized or stainless steel, mounting straps. Tap..
Fits: 2015-2018 Dodge 6.7L Cummins There’s no greater enemy for a transmission than heat. Whether your 2015-2018 RAM 6.7L Cummins is a dedicated tow vehicle, hardworking fleet truck, or a daily driver with a liking for the dragstrip, you need to ensure that your transmission runs cool. Luckily,..
TK4038 Inner Axle Seal and Tool Kit for 2013-up Ram 3500 and 2014-up Ram 2500 with AAM 925 12 Bolt Electric Central Axle Disconnect Front Axle. Installer and Thrust Plate Made in Montana.Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific..
Add another measure of protection and increase fluid flow to transmission cooler increasing cooling capacity with the easy-to-install billet aluminum PPE Transmission Fluid Thermal Bypass Valve for the Ram Cummins diesel.The OEM part has restrictive internal passages. When the OE..
The Alliant AP0083 Injector Brush Kit is a must have item in the toolbox of any 2003-2018 Dodge 5.9L & 6.7L Cummins technician. The Alliant Injector Brush Kit provides you with all the proper tools you need to clean the injector bore and seat while installing new injectors in an engine. Fea..
This is our solution to the OEM plastic or other companies' y-pipes on 13+ Rams with the dual radiators. The upper plastic coolant y-pipe is notorious for cracking and spraying coolant all over your engine bay. You can be reassured that our y-pipe has NO fail points because it has no welds. Fits onl..
This cover screws into the front cover and seals the port access hole in front of the CP3 pump gear and nut. It has a 3/8 drive ratchet indentation for easy tightening. We've seen these covers melt, crack, or get broken from over tightening.
Some of these plugs or covers say 49352..
89-2018 Dodge 5.9L & 6.7L Cummins Diesel block heater replacement cord.
Some trucks came equipped but a block heater, but didn't come with a cord. This is a direct replacement cord.
By Cummins, part number 251919.
89-2017 Dodge 5.9L & 6.7L Cummins Diesel block heater replacement cord.
Some trucks came equipped with a block heater, but didn't come with a cord. This is a direct replacement cord.
By Phillips, part number 3600008.
2013-2016 6.7L Cummins A/C Line Reroute Kit-If you are looking to do an aftermarket turbo set up like a 2nd Gen Swap Kit, or Compund Kit then this kit is a must! The factory A/C lines are in the way, this kit allows for all the room you need to get your kit installed properly! Fleece Performance par..
CNC machined stainless Push-Lock high flow fitting for your CP3. This is designed to work with any 1/2" fuel hose and does not require a hose clamp when used with Push-Lock style hose.
G&R Part Number: GRD00169..
1 Week Lead Time! Contact to Confirm Availability!Replacement crank case breather (CCV) filter cover, for 2007.5-2012 Ram 6.7L Cummins trucks.
Item #11 in the picture.
This will also work on 2013-2018 trucks if you have the CCV sensors disabled in tuning, as the 13+ trucks have a sensor in ..
**Discontinued**Stainless Diesel's 2nd Generation style exhaust manifold turbo piping kit for 2013-2018 Dodge Diesel trucks. Dodge Cummins 6.7 Liter. Part Number: 1318-S42GSPKDrastically lower your EGT's with outstanding efficiency and driveability when you upgrade to a 2nd gen style manif..