2013-2018 6.7L 24V Cummins Sensors & Pigtails

Factory OEM Mopar Grid Heater Wiring. Also called a fusible link.  Fits 2013-2018 Ram 2500 & 3500 6.7L Cummins trucks.  Mopar part number: 68236141AASupercedes 68206017AA..

Replacement engine starter connector with 6" pigtail for use on the 2003-2018 Cummins. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back on the road q..

Our replacement connector with 6" pigtail will get you back on the road quickly.  Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts y..

Our 8" extension harness for the 2003-2018 Dodge RAM provides for additional routing clearance to a variety of sensors on the engine including the camshaft, crankshaft, and exhaust pressure sensors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimp..

OEM Mopar crankshaft/ camshaft position sensor for 03-18 5.9L/ 6.7L Cummins. Fitment:YearMakeModelBody & TrimEngine & Transmission2018Ram2500Big Horn, Laramie, Laramie Longhorn, Limited, SLT, Tradesman6.7L L6 - Diesel2018Ram3500Big Horn, Laramie, Laramie Longhorn, Limited, SLT, Tradesma..

The Driven Diesel Fan Clutch Accelerator Switch for 05-07 5.9L MANUAL TRANSMISSION Dodge Cummins AND 07-20 6.7L AUTO OR MANUAL TRANSMISSION Dodge Cummins trucks will give you some manual control of your electronic engine fan clutch. When enabled, the Fan Clutch Accelerator will cause your ECM to thi..

Convert your 2006-2018 Ram with 6-pin injector connectors to the 2003-2005 4-pin injector connectors with our plug-and-play conversion harness.  This conversion harness is for use on a 2006-2018 Cummins where a 2003-2005 rocker box style is used. Produced in-house, our manufacturing process inc..

Cummins injector harness connector with 6" pigtail for 2006 - 2022 5.9L and 6.7L Cummins engines. Two of these connectors are utilized on the engine and connect the injector harness to the valve cover wiring harness.  Includes heat-sealable butt-style connectors. Produced in-house, our manufact..

Valve Cover Gasket PigtailBrand: BT-PowerCondition: NewEngine Fitment:Cummins 5.9L / 6.7LUnderhood temps can shorten the life of the harness connections, instead of replacing the full harness, Bostech offers the pigtail separately for an easier and more affordable fix. Part number: WH03027..

Direct fit replacement fuel pressure actuator for 07.5-14 Dodge Ram 6.7L Cummins applications. Cross reference numbers: 68005241AA, 0928400642Fuel Pressure Regulator MPROPBrand: BostechCondition: NewLimited 13 month / unlimited mileage warrantyEngine Fitment:Cummins 6.7LTechincal Informati..

Mopar OEM Replacement MAP sensor for 2007.5-2018 6.7 Cummins Mopar Part Number: 68453737AASuperseded Part Number: 68005161AASuperseded Part Number: 68005161AB..

Replacement connector with 6" pigtail for use on the 6.7L Cummins enigines and HE400VG/HE451VE turbochargers. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck ba..

MAF Sensor for '07.5-'17 Dodge Turbo Diesel trucks with the 6.7L engine. This sensor mounts to the airbox intake tube on the PASSENGER side of the truck. Mopar Part Number: 68002441AC..

Our replacement turbine shaft speed sensor works on all Cummins Holset HE351VE and HE300VE/VG turbos on the 6.7L Dodge, MY 2007.5-2020. Replaces Cummins and Holset P/N's including: 5550060, 5327846H, 4032316, 5327846, 5550064, 5325947, 5327846H, R8445964AA Fleece Part Number: FPE-35..

Replacement connector with 6" pigtail for use on the 6.7L Cummins. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck..

Replacement connector with 6" pigtail for use on the 6.7L Cummins, including ISL and ISX engines. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement p..

Replacement connector with 6" pigtail for use on the 2007-2022 Ram with 6.7L Cummins along with many other applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to g..

Replacement connector with 6" pigtail for use on the 6.7L Cummins and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the ro..

Replacement connector with 6" pigtail. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back on the road qui..

This engine air intake heater relay is designed to match the fit and function of the original relay on specified vehicles, and is engineered for durability and reliable performance.Direct replacement - this engine air intake heater relay is designed to match the fit and function of the original rela..

Replacement connector with 6" pigtail for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the ..

Fuel heater for use in Fleece Performance heated fuel filter kits including PowerFlo Lift Pumps with a heater provision on the filter base.   Fuel heater specifications: Temperature switching points: ON: 28.4F +/-5.4F,  OFF: 48.2F +/- 5.4F At typical fuel flow rates a temperatur..

This NOx sensor has been made to match the original equipment sensor on certain vehicle years, makes and models, properly restoring nitrogen oxide detection to comply with emissions regulations.Direct replacement - this replacement NOx sensor matches the function and performance of the original sens..

OEM Mopar engine control module (ECM) for 13-15 Dodge Ram 6.7L Cummins.Vehicle FitmentYearMakeModelBody & TrimEngine & Transmission2015Ram2500Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, Outdoorsman, SLT, Tradesman6.7L L6 - Diesel2015Ram3500Big Horn, Laramie, Laramie Limi..

Replacement connector with 6" pigtail for use on both L5P Duramax and 2013-2018 Cummins equipped RAM trucks. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck bac..

Alliant Power Turbo Actuator for 2013-2018 Ram 6.7L Cummins. Must be calibrated by a scanner after installation. 2 year warranty applies. $250 Refundable Core Charge Applies. Customer is responsible for core return shipping. Cross reference:1700320095, 170-032-0095, 1700320115, 1..

This NOx sensor has been made to match the original equipment sensor on certain vehicle years, makes and models, properly restoring nitrogen oxide detection to comply with emissions regulations.Direct replacement - this replacement NOx sensor matches the function and performance of the original sens..

This replacement water-in-fuel (WiF) sensor matches the function and performance of the original equipment sensor to prevent water damaging a diesel fuel injector. Made of quality materials, it has undergone extensive testing to ensure durability.Ideal replacement - this water-in-fuel (WiF) sensor m..

Extension harness for use with air intake sensors on 2013-2018 Dodge Ram with 6.7L Cummins - this extension harness makes harness routings or sensor repositioning a snap. Part number: FPE-HAR-67-IAT-EXT..

Mopar OEM Reman Nitrous Oxide sensor for 13-18 6.7L CumminsCustomer is responsible for core return shipping. Mopar: R8210084AA..

Direct fit replacement water in fuel sensor for the damaged, stripped or broken factory sensor. Cross reference number: 68197868ABPart number: PFRK54553..

Direct fit OE Cummins replacement for 13-18 6.7L Cummins - Turbo Speed SensorCummins: 5550060..

Replacement connectors with 6" pigtail for use on the Cummins engine, this kit includes BOTH sides of the connector with flying leads to allow you to repair both sides when damaged by a broken serpentine belt. Produced in-house, our manufacturing process includes fully automated wire cutting and ter..

Replacement connector with 6" pigtail for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the ..

Direct fit replacement NOX Outlet Sensor.  Fitment:14-17 Ram 2500 6.7L Cummins15-17 Ram 3500/ 4500/ 5500 6.7L Cummins Cross Reference numbers: 68227486AA, 68197109AA Nitrogen Oxide - NOx SensorBrand: BT PowerCondition: NewLimited 13-Month Unlimited mileage warranty  ..

This NOx sensor has been made to match the original equipment sensor on certain vehicle years, makes and models, properly restoring nitrogen oxide detection to comply with emissions regulations.Direct replacement - this replacement NOx sensor matches the function and performance of the original sens..

Replacement connector with 6" pigtail for use in multiple locations on the Duramax, Cummins, Powerstroke, and other GM vehicles. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need t..

Stainless steel universal coolant level switch for use with the Fleece Performance coolant tank (Part Number: FPE-34235) or custom configuration tanks.  Features a stainless steel body with 1" NPT thread, 8" harness, and two-pin metripack connector for direct connection to the chassis harness o..

Mahle OEM quality Valve Cover Gasket Set for 2006-2023 5.9L & 6.7L Cummins. With Integrated Wire HarnessValve Cover Gasket Material: Molded Rubber/Steel Cross Reference part numbers: 5264950 Note: These items may come in a Victor Reinz box, as Mahle has acquired Victor Reinz. Mahle part..

Will work with 1998.5 to 2002 and 2004.5-2023 and up Cummins diesel engines. Will also work on Cummins ISX diesels. 2003-2004 Cummins engines Click Here. Cummins: 4954905..

Replacement Fuel Heater and Turbo Wastegate Solenoid Electrical Connector with 6" Pigtail for the Cummins engines. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest..

Replacement connector with 6" pigtail for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the ..

Replacement connector with 6" pigtail for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back ..

Almost too many applications to list for this multi-purpose two pin connector with 6" pigtail.  This connector is used in hundreds of applications on GM and Dodge vehicles. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire c..

MOPAR 68197868 replacement water-in-fuel sensor for '13-'18 Ram Cummins 2500/3500 trucks with chassis-mounted fuel filters.This sensor threads into the bottom of the under-bed fuel water separator.  Part Number: 68197868AB..

MAP Sensor for '07.5-'20 Dodge Turbo Diesel trucks with the 6.7L engine. This sensor is found on the back side of the intake horn.  McBee part number: M-2897333 Replaces Mopar part number 53034091AB...

Backordered til Mid December   **Updated on 09/06/2024** MAP Sensor (also called manifold absolute pressure) for '07.5-'20 Dodge 6.7L Cummins Turbo Diesel trucks. This sensor is found on the back side of the intake horn.  Part number: 2897333 Replaces Mopar part number 530..

03-17 Dodge 5.9L Cummins Diesel Cam or Crank (uses same sensor) Position Sensor or CPS Replaces: 3408529, 2872277 Cummins: 5594275NX    ..