2013-2018 Ram 6.7L Cummins Fuel Lines & Connector Tubes

Replacement high pressure fuel lines from Fleece Performance.  These are a direct replacement for your cracked, broken, or leaking injector lines.  Replaces Cummins part number 4935981 on cylinder 1. Part number: FPE-FL-CUMM-6.7-1 ..

Replacement high pressure fuel lines from Fleece Performance.  These are a direct replacement for your cracked, broken, or leaking injector lines.  Replaces Cummins part number 4935982 on cylinders 2 & 3. Part number: FPE-FL-CUMM-6.7-23..

Replacement high pressure fuel lines from Fleece Performance.  These are a direct replacement for your cracked, broken, or leaking injector lines.  Replaces Cummins part number 4935974 on cylinders 4 & 5.  Part number: FPE-FL-CUMM-6.7-45..

Replacement high pressure fuel lines from Fleece Performance.  These are a direct replacement for your cracked, broken, or leaking injector lines.  Replaces Cummins part number 4935976 for cylinder 6. Part number: FPE-FL-CUMM-6.7-6..

Anodized aluminum 3/8" quick connect to -8AN male adapter fitting. Fits 2003-2018 Dodge Ram with Cummins OE sending unit sending unit output to allow you to easily adapt aftermarket pumps and filters to the OE sending unit, including our Fleece Performance Auxiliary Fuel Filter and Line Kits (P..

Introducing our full-featured fuel filter conversion kit for the 2003-2018 Dodge Cummins.  This kit builds off our standard kit with the addition of an integral high-flow fuel heating element. The kit includes everything you need to properly route, plumb and filter fuel for your Cummins engine ..

Common Rail Cummins Dual CP3 Billet Idler Pulley by Industrial InjectionPart number: 24FC08..

Removes injectors on many Dodge pickups & vansCummins 5.9L & 6.7L Diesel enginesPart number: 2746..

Fits: 2003-2019 Dodge 2500/3500 35 Gallon Tank (98.3" Bed Length) Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions. Di..

FASS Fuel Systems Cummins Fuel Distribution Block (CFDB1001K) The FASS Fuel Systems Cummins Fuel Distribution Block is designed for high performance applications that are utilizing up to three CP3s, but can also be used on single or dual CP3 applications.Our uniquely shaped Fuel Distribution Block a..

All new stainless steel fuel tube nuts from Fleece Performance.  Ensure a proper seal on your injector tubes and high pressure injection lines with our high tolerance nuts produced from 300 series stainless steel.  Includes a quantity of 6 nuts. APPLICATION NOTESReplaces Cummins P/N: ..

Fits:  2005-2010 Dodge Cummins 5.9L/6.7L 2011-2018 Ram Cummins 5.9L/6.7L 2021-2022 Ram 6.7L (Stock to Moderate) This FASS TSD07100G Titanium Signature Series 100GPH Fuel System is the perfect for your truck. The Titanium Signature Series diesel fuel System was bu..

Direct fit replacement injector supply tube by Bostech for 07.5-13 Dodge Ram 6.7L Cummins. These are recommended to be changed when replacing a fuel injector. This is a reman product and does carry a core charge. Cross reference numbers: 68005335AA, 2872395, 4929864, F00RJ01831 Injec..

Direct fit replacement fuel pressure actuator for 07.5-14 Dodge Ram 6.7L Cummins applications. Cross reference numbers: 68005241AA, 0928400642Fuel Pressure Regulator MPROPBrand: BostechCondition: NewLimited 13 month / unlimited mileage warrantyEngine Fitment:Cummins 6.7LTechincal Informati..

Replace the Factory Fuel Line on your 2007.5-2018 Dodge 6.7 Cummins with this DTech DT670012 Fuel Injection Line for Cylinders 2 and 4. This line is direct fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over..

Fix your cylinder 6 Injection line with this high quality replacement for your factory line from DTech, Dtech Fuel Lines feature a direct-fit design with no modifications needed for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fu..

The Dtech Injection Lines are quality replacements for factory injector lines on your 2007.5-2018 6.7 Cummins. This line is direct fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fuel line is constru..

Replace the contaminated or damaged fuel line on your 2007.5-2018 Dodge 6.7 Cummins with the DTech DT670010 Pump To Rail Fuel Injection Line. Dtech Fuel Lines are a direct-fit replacement and do not require any additional modifications for installation. DTech has been a leading supplier of diesel in..

Fits: 2007.5-2018 6.7L CumminsThis genuine Cummins Fuel Injection Line Noise Isolator For 2007.5-2018 6.7L  engines is an OEM replacement that maintains factory fit and performance. Each component is constructed from quality materials to give you durability and long lasting performance. This Cu..

The Dtech DT670011 Fuel Injection Line for Cylinder 1 is a perfect replacement for factory lines. The line is direct-fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fuel line is constructed from..

ATS Fuel Rail Pressure PlugFitment: 2007½-2018 Dodge Ram 6.7L Cummins Common Rail A common failure of the Ram 6.7L Cummins Common Rail is the pressure relief valve. These relief valves are a basic spring, designed to relieve pressure as it exceeds a specific predetermined pressure. As pressure ..

New! Replacement high pressure fuel lines from Fleece Performance.  These are a direct replacement for your cracked, broken, or leaking injector lines.  This complete set includes six lines.   Kit contents: (Qty 1) FPE-FL-CUMM-6.7-1(Qty 2) FPE-FL-CUMM-6.7-23(Qty 2) FPE-FL-CU..

6.7L Cummins Fuel Rail Fitting Adapter by Fleece Performance. Thread info: 14mmx1.5 to 18mmx1.5 - 3.5mm IDPart number: FPE-34197..

The Industrial Injection dual CP3 is the ultimate for performance. This kit can be purchased with a new, modified, Dueling Dragons (two 85% Dragon Fire CP3's) or the Dueling Double Dragons (two 120% CP3's) CP3’s for those who compete in the competition circuits.Efficiency is increased and EGTs reduc..

DescriptionThe Industrial Injection dual CP3 is the ultimate for performance. This kit can be purchased with a new, modified, Dueling Dragons (two 85% Dragon Fire CP3's) or the Dueling Double Dragons (two 120% CP's) CP3’s for those who compete in the competition circuits.Efficiency is increased and ..

07.5-22 Dodge 6.7L Cummins Diesel New .120 High Flow Fuel Connector Tubes Includes new o-rings. Recommended if you have a modified or dual cp3 setup. PLEASE ALLOW 1-3 DAYS FOR SHIPMENT, WE BUILD THESE ON DEMAND.   Part Number: FT120/6.7NEW..

Direct fit replacement connector tube set for 07.5-22 Dodge Ram 6.7L Cummins It is recommended that these are replaced anytime you remove/ replace an injector. These are 100% new units.  Part number: DT670005..

The XDP OER Series Fuel Injector Connector Tube XD528 is a high-quality replacement for failed connector tube in your 2007.5-2022 Dodge Ram 6.7L Diesel. Also known as a fuel supply tube or injector supply connector, this tube feeds fuel from the high-pressure common rail to the fuel injectors. Ov..

When producing more power from a Dodge RAM 2500/3500 with a Cummins engine, more fuel is required. To supply the injection pump with additional fuel, upgraded lift pumps are added, often with additional filters and water separators to ensure the fuel is always clean. With these upgrades, the factory..

A must have for any 2012-2016 GM 6.6L Duramax and 2013-2018 Dodge 6.7L Cummins owner, the XDP WIF Wrench XD247 makes it easy to remove and reinstall your factory Water In Fuel (WIF) Sensor. Using XDP's specially designed wrench eliminates the risk of damage to the WIF Sensor from tools like pliers a..

The Fleece Performance Dual Pump Kit Hardware Kit for the 6.7L Cummins is designed to fit perfectly and comes with everything you need to get the job done right the first time with a simple and clean install. Our dual pump kit mounts the second pump on the front cover giving you a low profile look. ..

The Industrial Injection Ram Pickup Anodized Billet Fuel Filler Cap was developed to properly seal the factory fuel fill hole that Ram left capless.Features:Prevents foreign debris and moisture from entering the fuel tank.Helps prevent DEF crystals from entering the fuel tank and ruining your fuel s..

Alliant Power Fuel System Replacement or Contamination Kit for 2013-2018 Dodge Ram 2500 & 3500 Pick-up Trucks with the 6.7L Cummins ISB engine.  NOTE:  Does not fit Cab & Chassis ModelsIs your hard working Ram 2500 or 3500 pickup with a 6.7L Cummins ready for fuel system re-fresh, ..

The XDP OER Series New Fuel Rail Assembly XD602 is a direct-fit replacement for the contaminated fuel rail in your 2013-2018 Ram 6.7L Diesel. Like all XDP OER Series products, this fuel rail is manufactured to OEM specifications. Each unit comes ready for installation with a new fuel pressure relief..

Purchase the XDP OER Series Fuel Contamination Kit XD529 and get your 2013-2018 Ram 6.7L Cummins 2500/3500 pickup back on the road. The fuel system in your Ram is known to be reliable and dependable, but one bad tank of fuel can cause significant damage. A fuel system flush will not guarantee tha..

G&R Diesel single filter head for the rear frame cab & chassis trucks. This product will ONLY work on Cab & Chassis Trucks G&R Diesel: GRD67CM3028-1, GRD67CM3028-2, GRD67CM3028-3, GRD67CM3028-4..

Cummins 12 valve and 24 valve lift pump block off plate.  Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.03-18 trucks, this blocks off the ccv breather drainback port.   O-ring ..

07.5-2018 Dodge 6.7L Cummins &04.5-2010 GM 6.6L Duramax dieselBosch Rail Pressure Relief ValveBosch 1110010013..

PROBLEM: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump.  Each of these has some pretty significant drawbacks including the ¼ tank issues that result in cavitation of the ..

The PowerFlo lift pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance.  The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp! FEATURES Direct OEM In-Tank Replacement: The PowerFlo Lift Pump retains the factory ..

03-18 Dodge 24V CR Cummins CP3 Front Gearcase Mounting O-Ring, this O-ring seals the CP3 to the gearcase.Replaces Bosch F00E200094 Part # 3949688..

Copper Injector sealing washer for the 2003 to 2018 5.9L & 6.7L Cummins. Aprox: Diameter: 15.0mm Thickness: 1.50mm Item 29 in picture only. (Second picture) Cummins part number: 3937142 (or 3976371) Washer may differ slightly from image...

Copper Injector sealing washer for the 2003 to 2018 5.9L & 6.7L Cummins. Approx.: Diameter: 15.0mm Thickness: 1.50mm McBee part number: M-3937142 replaces Cummins 3976371 Washer may differ slightly from image...

Set of 6 Cummins: 4062328  Image for reference only..

Features Pump to Pump Design for Ease of Installation, Better Looks, and More Efficiency Custom Billet Wheel (with optional polishing) Custom Second Wheel Billet Acorn Nut Comes with Hardware and High-Pressure Fitting/Line Comes with Fish CP3 Controller for Reliability and Simplicity ..

Also called a connector tube or crossover tube nut. This is for a single (1) nut, 6 are needed.Genuine OE Bosch Bosch Part number: F00RJ00437Replaces:Cummins: 3946625, 4893739, 5264181Mopar: 5086866AB..

Take full control of your Cummins dual CP3's using your just your ECM. The CP3X2 harness allows you to control your Cummins dual pumps without an expensive dual pump controller. We recommend multiplying the stock FCA current table (D0787) on the Cummins ECM's by 1.6-1.7 as a place to start. The FCA ..

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.Direct replacements - the components in this fuel i..